Scribd
Upload
98 views

Sika® Primer-209 D: Product Data Sheet

This document provides product data and application instructions for Sika Primer-209 D, a solvent-based black primer used to improve adhesion on plastics and other substrates prior to applying Sika 1-component polyurethanes. It has a shelf life of 9 months and is applied in a thin coat using a brush, felt or foam applicator.

Uploaded by

Khin Sandi Ko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
98 views

Sika® Primer-209 D: Product Data Sheet

This document provides product data and application instructions for Sika Primer-209 D, a solvent-based black primer used to improve adhesion on plastics and other substrates prior to applying Sika 1-component polyurethanes. It has a shelf life of 9 months and is applied in a thin coat using a brush, felt or foam applicator.

Uploaded by

Khin Sandi Ko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRODUCT DATA SHEET

Sika® Primer-209 D
PIGMENTED, SOLVENT BASED PRIMER FOR PAINTS AND PLASTICS

TYPICAL PRODUCT DATA (FURTHER VALUES SEE SAFETY DATA SHEET)


Chemical base Solvent-based Polyurethane solution
Color (CQP001-1) Black
Solid content 30 %
Application temperature 5 ─ 40 °C
Application method Brush, felt, foam applicator
Consumption depending on substrate porosity 50 ml/m2
Flash-off time ≥ 15 °C 10 minutes
< 15 °C 30 minutes
maximum 24 hours
Shelf life 9 months A
CQP = Corporate Quality Procedure A) stored in sealed container in up-right position in a dry place at ≤ 25 °C

DESCRIPTION AREAS OF APPLICATION METHOD OF APPLICATION


Sika® Primer-209 D is a solvent-based black Sika® Primer-209 D is used to improve adhesion Surfaces must be clean, dry and free from
primer, which reacts with moisture and forms a on many plastics and paints such as GRP, epoxy grease, oil, dust and contaminants.
thin layer. This layer acts as a link between sub- resins, PVC, ABS, PMMA, PC, PS and acrylics, al- Adhesion on substrates may be improved by
strates and adhesives. kyds/melamine, powder coatings, and baking adding and/or combining pre-treatment pro-
Sika® Primer-209 D is specifically formulated varnishes. cesses such as scuffing, cleaning and activating.
for the treatment of bond faces prior to applic- Due to the wide variety of plastics, it is mandat-
ation of Sika’s 1-component Polyurethanes. ory to perform preliminary tests on original Application
This primer might provide excellent adhesion substrates under production conditions. Shake the Sika® Primer-209 D can very thor-
without previous activation step on certain Seek manufacturer’s advice and perform tests oughly until mixing ball rattles freely. Continue
plastic substrates. on original substrates before using Sika® shaking for another minute and apply a thin
Primer-209 D on materials prone to stress but covering coat with a brush, felt or foam ap-
cracking. plicator.
This product is suitable for experienced profes- Ideal application and surface temperature are
sional users only. Test with actual substrates between 15 °C and 25 °C.
and conditions have to be performed to ensure Sika® Primer-209 D has to be applied once only.
adhesion and material compatibility. Care must be taken to ensure that this single
application gives adequately dense coverage.
Consumption and method of application de-
pend on the specific nature of the substrates.
Tightly reseal container immediately after each
use.

PRODUCT DATA SHEET


Sika® Primer-209 D
Version 01.01 (02 - 2020), en_US
014761012098002000

1/2
IMPORTANT NOTE FURTHER INFORMATION LEGAL DISCLAIMER
Sika® Primer-209 D is a moisture reactive sys- The information herein is offered for general Prior to each use of any product of Sika Corpor-
tem. In order to maintain product quality it is guidance only. Advice on specific applications is ation, its subsidiaries or affiliates (“SIKA”), the
important to reseal the container with the in- available on request from the Technical Depart- user must always read and follow the warnings
ner plastic liner immediately after use. Once ment of Sika Industry. and instructions on the product’s most current
the surface pre-treatment operation is com- Working instructions issued for a defined ap- product label, Product Data Sheet and Safety
pleted, the cap has to be screwed on. plication may further specify technical data Data Sheet which are available at usa.sika.com
Dispose the product of approx. one month contained in this Product Data Sheet. or by contacting SIKA’s Technical Service De-
after opening if used frequently or after two Copies of the following publications are avail- partment via email at [email protected].
months in case of infrequent use. able on request: Nothing contained in any SIKA literature or ma-
If gelling, separation or a significant increase in ▪ Safety Data Sheets terials relieves the user of the obligation to
viscosity is noted, discard the primer immedi- read and follow the warnings and instructions
ately. PACKAGING INFORMATION for each SIKA product as set forth in the current
Never dilute or mix this product with any other 250 ml product label, Product Data Sheet and Safety
substances. Can Data Sheet prior to use of the SIKA product.
1000 ml
If used on transparent or translucent substrates SIKA warrants this product for one year from
such as plastics, etc., an adequate UV protec- date of installation to be free from manufactur-
tion is mandatory. BASIS OF PRODUCT DATA ing defects and to meet the technical proper-
All technical data stated in this Product Data ties on the current Product Data Sheet if used
Sheet are laboratory test based. Current meas- as directed within the product’s shelf life. User
ured values may vary due to factors beyond our determines suitability of product for intended
influences. use and assumes all risks. User’s and/or buyer’s
sole remedy shall be limited to the purchase
ENVIRONMENTAL, HEALTH AND
SAFETY price or replacement of this product exclusive
For further information and advice regarding of any labor costs. NO OTHER WARRANTIES EX-
transportation, handling, storage and disposal PRESS OR IMPLIED SHALL APPLY INCLUDING
of chemical products, user should refer to the ANY WARRANTY OF MERCHANTABILITY OR FIT-
actual Safety Data Sheets containing physical, NESS FOR A PARTICULAR PURPOSE. SIKA SHALL
environmental, toxicological and other safety NOT BE LIABLE UNDER ANY LEGAL THEORY FOR
related data. User must read the current actual SPECIAL OR CONSEQUENTIAL DAMAGES. SIKA
Safety Data Sheets before using any products. SHALL NOT BE RESPONSIBLE FOR THE USE OF
In case of an emergency, call CHEMTREC at 1- THIS PRODUCT IN A MANNER TO INFRINGE ON
800-424-9300, International 703-527-3887. ANY PATENT OR ANY OTHER INTELLECTUAL
PROPERTY RIGHTS HELD BY OTHERS. Sale of
SIKA products are subject to the Terms and
Conditions of Sale which are available at ht-
tps://usa.sika.com/en/group/SikaCorp/term-
sandconditions.html or by calling +1 800-933-
7452.

PRODUCT DATA SHEET Sika Corporation


Sika® Primer-209 D 30800 Stephenson Highway
Version 01.01 (02 - 2020), en_US Madison Heights, MI 48071
014761012098002000 U.S.A.
Telephone: +1 248-577-0020
Email: [email protected]
www.sikausa.com

2/2

You might also like