Scribd
Upload
53 views2 pages

Practise Ques

The document contains 10 practise questions about analyzing circuits: 1) Obtain the output for circuits shown in figures 1 and 2. 2) Obtain the output for the circuit in figure 3 and sketch the output waveform for the circuit in figure 4 given a 6Vp-p sinusoidal input. 3) Plot the output waveform for the circuit in figure 5 given the waveform in figure 6 as input. 4) Design circuits with outputs of Vo = 3V1 + 4V2 - 7V3 and Vo = 2V1 - 4V2 - 6V3 - 8V3. 5) Determine the conduction states of diodes D1 and D2 in figure 7 and solve for voltage and

Uploaded by

Abhijit Aroop
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views2 pages

Practise Ques

The document contains 10 practise questions about analyzing circuits: 1) Obtain the output for circuits shown in figures 1 and 2. 2) Obtain the output for the circuit in figure 3 and sketch the output waveform for the circuit in figure 4 given a 6Vp-p sinusoidal input. 3) Plot the output waveform for the circuit in figure 5 given the waveform in figure 6 as input. 4) Design circuits with outputs of Vo = 3V1 + 4V2 - 7V3 and Vo = 2V1 - 4V2 - 6V3 - 8V3. 5) Determine the conduction states of diodes D1 and D2 in figure 7 and solve for voltage and

Uploaded by

Abhijit Aroop
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PRACTISE QUESTIONS

1. Obtain the output for the circuit in fig 1.

Fig. 2
Fig. 1

2. Obtain the output for the circuit in fig 2.


3. Obtain the output for the circuit in fig 3.

Fig. 4

Fig. 3

4. A 6Vp-p sinusoidal signal is provided to the circuit in Fig. 4. Sketch the output waveform.
Consider Supply voltage as Vs.
5. The waveform in Fig 6 is given as input to circuit in Fig. 5. Plot the output waveform for the
circuit.

Fig. 6

Fig. 5

6. Design a circuit such that the output of the circuit is 𝑉𝑜 = 3𝑉1 + 4𝑉2 − 7𝑉3
7. Design a circuit such that the output of the circuit is 𝑉𝑜 = 2𝑉1 − 4𝑉2 − 6𝑉3 − 8𝑉3
8. Determine the conduction state of ideal diodes D1 & D2 in Figure 7
9. Solve for voltage and current through 5kΩ resistor for the circuit in Figure 15. Voltage drop for
ideal Si & Ge Diode are 0.6V and 0.3V respectively
10V 0V
15kΩ
D1 D2 Si
Si Ge
5kΩ

3V 5V 5V 5kΩ
Vo

10Ω 3Ω

FIG 8
FIG 7
10. Analyze and sketch the output voltage waveform of the circuit in Figure 16 if the input is sine
wave having 2V peak to peak.

You might also like