Scribd
Upload
677 views1 page

RMT465477 OK Flux 1071L F7A4 F7P5 EH14 DS

This test certificate summarizes the analysis of an SAW flux batch. It provides the chemical analysis and mechanical properties of the weld deposit, confirming they meet the ASME Section II Part C SFA/AWS A 5.17 F7A4/F7P5-EH14 specification. Radiography of the weld was also satisfactory. The certificate verifies that the SAW flux batch number RMT465477 conforms to all ASME Section II Part C specification requirements.

Uploaded by

harikrishnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
677 views1 page

RMT465477 OK Flux 1071L F7A4 F7P5 EH14 DS

This test certificate summarizes the analysis of an SAW flux batch. It provides the chemical analysis and mechanical properties of the weld deposit, confirming they meet the ASME Section II Part C SFA/AWS A 5.17 F7A4/F7P5-EH14 specification. Radiography of the weld was also satisfactory. The certificate verifies that the SAW flux batch number RMT465477 conforms to all ASME Section II Part C specification requirements.

Uploaded by

harikrishnan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Test Certificate

ESAB India Limited


Regd. Office : Plot No.13, 3rd Main Road Your partner in
Industrial Estate, Ambattur, Chennai - 600 058. Welding and cutting
Website : http://www.esabindia.com

Consumable: SAW Flux Size :


Product : OK flux 10.71L Certificate No.: 0512201903
Batch No. : RMT465477 Date of Issue : 05/12/2019

This material conforms to specification: ASME Section II Part C SFA/AWS A 5.17 F7A4/F7P5-EH14

Chemical analysis Mechanical Properties


of weld deposit Wt% in of all weld metal
acc with EN 10204 2.2 in acc with EN 10204 2.2
As welded PWHT
C 0.075 YS MPa 510 415
Mn 1.82 UTS MPa 595 550
Si 0.470 %Elongation (4D) 27.5 30.5
P 0.023 CVN Impact energy @ -40°C -46°C
S 0.011 Joules
Cu 0.068 Average Joules 42 50
Al 0.015
SR Temperature 0C 620
SR Time in Minutes 60

Radiography Satisfactory

Ferrite
Remarks
Wire used - OK Autrod 12.40L

We certify that the supply made against the Test Certificate conforms to all requirements of
ASME Section II Part C specification, Edition 2017, in all respects.

K.Saravanan
Sr.Officer – Quality Assurance

Ambattur Plant : Plot No.13, 3rd Main Road, Industrial Estate, Ambattur, Chennai - 600 058. Tel: 044-43404670

You might also like