Scribd
Upload
59 views2 pages

A P F 16 W: Insert ISO Designation

This document provides specifications for insert designation including size, tolerance, type, thickness, corner style, cutting direction, and optional manufacturer symbols. It defines the standardized symbols used to indicate these characteristics in a concise ISO designation format. Tolerance classes range from A to N, thickness ranges from 2.38 to 6.35 mm, corner styles include sharp, rounded, chamfered, and double chamfered, and cutting direction is indicated as right, left, or neutral hand.

Uploaded by

FaustoVinicioAcuñaCoello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views2 pages

A P F 16 W: Insert ISO Designation

This document provides specifications for insert designation including size, tolerance, type, thickness, corner style, cutting direction, and optional manufacturer symbols. It defines the standardized symbols used to indicate these characteristics in a concise ISO designation format. Tolerance classes range from A to N, thickness ranges from 2.38 to 6.35 mm, corner styles include sharp, rounded, chamfered, and double chamfered, and cutting direction is indicated as right, left, or neutral hand.

Uploaded by

FaustoVinicioAcuñaCoello
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Insert ISO Designation Metric

A 1
P
2
F 3
W 4
16 5

1 Shape 2 Clearance

A H M O R C D E G

S T X Z N P Other normal clearances


special requiring SPECIAL
specification Symbol O.

3 Tolerance
Class D M S
A(1) mm ±0,025 ±0,005 ±0,025
C(1) mm ±0,025 ±0,013 ±0,025

E (1)
mm ±0,025 ±0,025 ±0,025
F (1)
mm ±0,013 ±0,005 ±0,025
G mm ±0,025 ±0,025 ±0,130

H(1) mm ±0,013 ±0,013 ±0,025


J (1)
mm from ±0,050 ±0,005 ±0,025
to ±0,150
K(1) mm from ±0,050 ±0,013 ±0,025
to ±0,150
L(1) mm from ±0,050 ±0,025 ±0,025
to ±0,150
M mm from ±0,050 from ±0,080 ±0,13
to ±0,150 to ±0,200
N mm from ±0,050 from ±0,080 ±0,025
to ±0,150 to ±0,200
U mm from ±0,080 from ±0,130 ±0,13
to ±0,250 to ±0,380

(1) Indexable inserts with ground wiper edges. (2) Dependent upon the insert size (see ISO 1832 standard)

4 Type
H R U W

N
X
Special feature requiring additional specifications.

34
Insert ISO Designation Metric

046
PD 7
T
8
R 9
-
10

5 Size 7 Corner continued


A H M O R 1 2 Inserts With Wiper Edges.

S T X Z Two Letter Symbol:


special
1 For cutting r 2 For wiper edge
edge angle r
normal clearance
A = 3°
A = 45° B = 5°
D = 60° C = 7°
E = 75° D = 15°
6 Thickness F = 85° E = 20°
P = 90° F = 25°
G = 30°
N = 0°
02 = 2,38 mm P = 11°
03 = 3,18 mm Z = Any other wiper edge clearance.

8 Edge Condition
T3 = 3,97 mm
04 = 4,76 mm F E T

Sharp Cutting Rounded Chamfered


Edges Cutting Edges Cutting Edges
M5 = 5,00 mm
05 = 5,56 mm K S P
06 = 6,35 mm

Double Chamfered Double


Chamfered Rounded Chamfered Rounded
7 Corner Cutting Edges Cutting Edges Cutting Edges

OPTIONAL SYMBOL
Rounded Corner Inserts

Value of corner radius given in 1/10 mm 9 Cutting Direction


Note: For sharp corner R L N
Symbol = 00

Rounded Inserts

Symbol = 00 Right Hand Insert Left Hand Insert Neutral Insert


If the Ø is converted from an inch value.
OPTIONAL SYMBOL
Symbol = M0
If the Ø is converted from a metric value.
10 Optional
Manufacturers optional symbol consisting of numbers or letters;
shall be separated from the standardized designation by a dash (-).
OPTIONAL SYMBOL

35

You might also like