Scribd
Upload
2K views1 page

Specification Sheet: 2 7/8" P 110 7.90 LBS/FT, PH 6 HYDRIL TUBING

This document provides specifications for 2-7/8" P-110 7.90 lbs/ft PH-6 Hydril tubing, including: - Pipe body data such as nominal OD, ID, weight, grade, wall thickness, and pressure ratings - Connection details including type (PH-6 Hydril), dimensions, strength, and torque requirements - A note that safety factors are not included in the performance figures given

Uploaded by

Alberto Cárdenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views1 page

Specification Sheet: 2 7/8" P 110 7.90 LBS/FT, PH 6 HYDRIL TUBING

This document provides specifications for 2-7/8" P-110 7.90 lbs/ft PH-6 Hydril tubing, including: - Pipe body data such as nominal OD, ID, weight, grade, wall thickness, and pressure ratings - Connection details including type (PH-6 Hydril), dimensions, strength, and torque requirements - A note that safety factors are not included in the performance figures given

Uploaded by

Alberto Cárdenas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SPECIFICATION SHEET MIN. WALL THICKNESS: 87.

5%
2‐7/8" P‐110 7.90 LBS/FT, PH‐6 HYDRIL TUBING

PIPE BODY DATA
NOMINAL OD (in.) 2.875
NOMINAL ID (in.) 2.323
NOMINAL WEIGHT (lbs/ft) 7.9
AVERAGE JOINT WEIGHT (lbs) 252.8
AVERAGE LENGTH Range 2
PIPE GRADE P‐110
NOMINAL WALL (in.) 0.276
TUBE DRIFT (in.) 2.229
BODY YIELD STRENGTH (lbs) 220,000
COLLAPSE (psi) 16,900
INTERNAL YIELD (psi) 18,500
SPECIFIED MINIMUM YIELD STRENGTH (psi) 110,000
CAPACITY (BBLS./LIN. FT.) 0.00524
CAPACITY (LIN. FT./BBL.) 191

CONNECTION DATA
CONNECTION  PH‐6 HYDRIL
CONNECTION OD (in.) 3.438
COMPRESSION EFFCIENCY 100%
CONNECTION ID (in.) 2.265
COMPRESSION STRENGTH (lbs) 262,000
EXTERNAL PRESSURE CAPACITY (psi) 17,800
INTERNAL PRESSURE CAPACITY (psi) 19,500
JOINT YIELD STRENGTH (lbs) 262,000
BENDING (100 ft) 181 deg
MAKE‐UP TORQUE MINIMUM (ft‐lbs) 3500
MAKE‐UP TORQUE OPTIMUM (ft‐lbs) 4000
MAKE‐UP TORQUE MAXIMUM (ft‐lbs) 4400
Note: All used figures have NO safety factor included for tension, temperature, or general S.F. etc.

The technical information contained herein, including the product performance sheet and other attached documents, has been extracted from information available from the manufacturer and is for 
reference only and not a recommendation. The user is fully responsible for the accuracy and suitability of use of the technical information. Concentric Pipe and Tool Rentals cannot assume responsibility 
for the results obtained through the use of this material. No expressed or implied warranty is intended. No safety factor is applied. The information provided for various inspection classes and for various 
wear conditions (remaining body wall) is for information only and does not represent or imply acceptable operation limits. It is the responsibliity of the customer and the end user to determine the 
appropriate performance ratings, acceptable use of the product, maintain safe operational practices, and to apply a prudent safety factor suitable for the application. 

You might also like