Scribd
Upload
172 views2 pages

BISS0001 SilvanChip

The BISS0001 is a PIR controller that uses analog and digital circuitry manufactured through a CMOS process. It has noise immunity techniques and requires few components, reducing costs. The document provides maximum ratings for voltage, temperature, and current. Electrical characteristics include supply voltage, operating currents, trigger voltages, and source/sink currents for the controller, relay, triac, and other components. A typical application circuit is shown.

Uploaded by

Samorai Kaza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views2 pages

BISS0001 SilvanChip

The BISS0001 is a PIR controller that uses analog and digital circuitry manufactured through a CMOS process. It has noise immunity techniques and requires few components, reducing costs. The document provides maximum ratings for voltage, temperature, and current. Electrical characteristics include supply voltage, operating currents, trigger voltages, and source/sink currents for the controller, relay, triac, and other components. A typical application circuit is shown.

Uploaded by

Samorai Kaza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BISS0001 PIR CONTROLLER

BISS0001 GENERAL DESCRIPTION


BISS0001 is a PIR (passive infra-red) controller, using analog
mixing digital design technique and manufactures by CMOS
process. With special noise immunity technique, BISS0001 is the
most stable PIR controller you can find on the market. More than
this, there are few components needed in its application circuit
which can reduce material cost and increase competitive.

BISS0001 Absolute Maximum Ratings

Parameter SYMBOL VALUE Units

POWER SUPPLY Vdd WITH REPECT TO Vss Vdd-Vss 5.0 V

VOLTAGE ON ANY PIN -0.3-5.6 V

OPERATING TEMPERATURE Top 0-70 C

STORAGE TEMPERATURE -65-150 C

BISS0001 ELECTRICAL CHARACTERISTICS


Symbol Parameter Condition Min. Typ. Max. Unit

Vdd SUPPLY VOLTAGE 3 5 6 V

Ist STANDY CURRENT 0.9 1.0 1.2 mA

Idd OPERATING CURRENT 1.8mA, TRIAC 1.8 2.5 mA


2.5mA, RELAY

Vref STABLE VOLTAGE Vdd>4.2V 3.0 3.2 3.4 V

Iref SOURCE CURRENT OF Vref 200 uA

RIPPLE OF Vref 0.5 mV

INPUT AND OUTPUT 0.3%


REGULATION OF Vref

Ftb TIME BASE OPERATING 15 16 17 KHZ


FREQUENCY

Vt+ CDS OPERATING TRIGGER 1.3 1.7 2.1 V

Vt- CDS OPREATING TRIGGER 0.6 0.9 1.1 V

Icds CDS SOURCE CURRENT 2.6 3.5 4.4 uA

Isource CDS OUTPUT SOURCE 9 10.4 17.4 mA


CURRENT

Isink CDS OUTPUT SINK CURRENT 11.6 13 21 mA

Silvan Chip Electronics Tech.Co.,Ltd.


Address: Fl.16 FuChang Building,Binhe Rd,Shenzhen,China
Phone: 86-0755-88291843 88304213 Fax ： 86-0755-88290509
Email: [email protected] Http:// www.sc-tech.cn
BISS0001 PIR CONTROLLER
Irs RELAY SOURCE CURRENT 5 mA

Irsink RELAY SINK CURRENT 5 mA

Vro RELAY OPERATING 18.8V: RELAY ON 13.1 18.8 V


VOLTAGE 13.1V: RELAY OFF

Itsink TRIAC SINK CURRENT 15 mA

Itsource TRIAC SOURCE CURRENT 50 uA

BISS0001 TYPICAL APPLICATION

Silvan Chip Electronics Tech.Co.,Ltd.


Address: Fl.16 FuChang Building,Binhe Rd,Shenzhen,China
Phone: 86-0755-88291843 88304213 Fax ： 86-0755-88290509
Email: [email protected] Http:// www.sc-tech.cn

You might also like