Scribd
Upload
148 views

Ender-3 Assembly Instruction - EN V.4.0

The document provides assembly instructions for an Ender-3 3D printer in 12 steps. It begins by instructing the user to select the correct input voltage for their location and provides a list of parts and tools needed for assembly. The 12 steps then detail each assembly step, including attaching the power supply, assembling the frame, installing the print bed and extruder. Technical specifications for the printer are also provided at the end.

Uploaded by

Instituto Novadent
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
148 views

Ender-3 Assembly Instruction - EN V.4.0

The document provides assembly instructions for an Ender-3 3D printer in 12 steps. It begins by instructing the user to select the correct input voltage for their location and provides a list of parts and tools needed for assembly. The 12 steps then detail each assembly step, including attaching the power supply, assembling the frame, installing the print bed and extruder. Technical specifications for the printer are also provided at the end.

Uploaded by

Instituto Novadent
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 16

Ender-3 3D Printer

Instructions for assembly

This guide is for Ender-3 3D printer.


Select the correct input voltage to match your local mains
(230V or 115V).
Because of software/hardware upgrades and model
Differences, new revisions may not be listed in this guide.
Please plug the Power cord into a three-hole power jack.
Detailed instructions for use are available on the TF card.

V.4.0
List 1
Assemblys

01 02 03 04

05 06 07 08 09

2PCS

10 11 12 13 14
List 2
Sections

15 16 17 18 19

Fasteners Tools

4PCS 2PCS
M5 T-nut
M5X8

2PCS 4PCS
M4X20 M5X25

4PCS 2PCS
M4X18P
M4X16

5PCS
4PCS Tie
M5X45

2PCS
Step 1
16 15

Longer
4PCS
M5X45

Shorter
Shorter
16 15

02
Front
Step 2

2PCS
*Select the correct input voltage to
M5X8 match your local mains(230V or 115V).

01

2PCS
It's 230V
M4X20

03
F ro
nt
Step 3

09

≈32mm

F ro n t
Step 4
2

M4X18P

17 08
B ac k
Step 5

18
2PCS
06
M4X16

k
B ac
Step 6

2PCS
M4X16

05 04

k
B ac
Step 7

07

te n
Tigh

t
F ro n
Step 8

14

Front
Step 9

Don't tighten it too tight

t
on
Fr
Step 10

4PCS 2PCS
M5X25 12

19
Step 11

2PCS
11 M5X8

10 2PCS
M5 T-nut

1 2

F ro
nt
Step 12

Exp3

Left
Basic Parameters
Model Ender-3 Working Mode Online or TF card offline
Molding Tech. FDM File Format STL,OBJ,AMF
Cura, Repetier-
Printing Size 220*220*250mm Slice Software
Host ,Simplify3D
≤180mm/s, Normal 30- Input:AC 115/230V 50/60HZ
Printing Speed Power Supply
60mm/s Output:DC 24V
Precision ±0.1mm Total Power 270W
Slice Thickness 0.1mm-0.4mm Filament 1.75mm PLA
Windows XP/Vista/7/10
Nozzle Diameter Standard 0.4mm Operating System
MAC、Linux
Nozzle Number 1 Language English
Nozzle Temp. ≤250℃ Resume Print YES
Bed Temp. ≤100℃ Filament Detector NO

SHENZHEN CREALITY 3D TECHNOLOGY CO.,LTD.


11F & Room 1201,Block 3,JinChengYuan,Tongsheng Community,
Dalang,Longhua District,Shenzhen,China,518109
Official Website:www.creality3d.cn
Tel:+86 755-85234565
Facebook QR code E-mail:[email protected] [email protected]

You might also like