Scribd
Upload
71 views2 pages

R001r4a5e PDF

This document summarizes amendments made to Regulation No. 1 concerning the approval of motor vehicle headlamps. Specifically, it inserts new paragraphs outlining transitional provisions that as of 6 months after the entry into force of Regulation No. 112, approvals will no longer be granted according to Regulation No. 1. However, approvals granted previously under Regulation No. 1 will remain valid indefinitely, and headlamps approved under Regulation No. 1 can continue to be fitted on vehicles. The amendments ensure a smooth transition to the new Regulation No. 112 while allowing for continued use of headlamps approved under the previous Regulation No. 1.

Uploaded by

M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views2 pages

R001r4a5e PDF

This document summarizes amendments made to Regulation No. 1 concerning the approval of motor vehicle headlamps. Specifically, it inserts new paragraphs outlining transitional provisions that as of 6 months after the entry into force of Regulation No. 112, approvals will no longer be granted according to Regulation No. 1. However, approvals granted previously under Regulation No. 1 will remain valid indefinitely, and headlamps approved under Regulation No. 1 can continue to be fitted on vehicles. The amendments ensure a smooth transition to the new Regulation No. 112 while allowing for continued use of headlamps approved under the previous Regulation No. 1.

Uploaded by

M
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

E/ECE/324

Add.1/Rev.4/Amend.5
E/ECE/TRANS/505?

4 December 2001

AGREEMENT
CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS
FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR
BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION
OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS */

(Revision 2, including the amendments which entered into force on 16 October 1995)

__________

Addendum 1: Regulation No. 1

Revision 4 - Amendment 5

02 series of amendments **/ - Date of entry into force: 8 September 2001

UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE HEADLAMPS EMITTING


AN ASYMMETRICAL PASSING BEAM AND/OR A DRIVING BEAM AND EQUIPPED WITH FILAMENT
LAMPS OF CATEGORIES R2 AND/OR HS1

__________

UNITED NATIONS

*/ Former title of the Agreement:

Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for
Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958.

**/ Not requiring changes in the approval number (TRANS/WP.29/815, para. 82).

GE.01-
E/ECE/324
Add.1/Rev.4/Amend.5
E/ECE/TRANS/505?
Regulation No. 1
page 2

Insert new paragraphs 14. to 14.7., to read:

“14. TRANSITIONAL PROVISIONS

14.1. As from six months after the official date of entry into force of
Regulation No. 112, Contracting Parties applying this Regulation
shall cease to grant ECE approvals according to this Regulation.

14.2. Contracting Parties applying this Regulation shall not refuse to


grant extensions of approval to this and any previous series of
amendments of this Regulation.

14.3. Approvals granted under this Regulation before the date of entry
into force of Regulation No. 112 and all extensions of approvals,
including those to a preceding series of amendments to this
Regulation granted subsequently, shall remain valid indefinitely.

14.4. Contracting Parties applying this Regulation shall continue to issue


approvals for headlamps on the basis of this and any previous series
of amendments to this Regulation, provided that the headlamps are
intended as replacements for fitting to vehicles in use.

14.5. As from the official date of entry into force of Regulation No. 112,
no Contracting Party applying this Regulation shall prohibit the
fitting on a new vehicle type of a headlamp approved under
Regulation No. 112.

14.6. Contracting Parties applying this Regulation shall continue to allow


fitting on a vehicle type or vehicle of a headlamp approved to this
Regulation.

14.7. Contracting Parties applying this Regulation shall continue to allow


fitting or use on a vehicle in use of a headlamp approved to this
Regulation as amended by any previous series of amendments, provided
that the headlamp is intended for replacement.”

___________

You might also like