Scribd
Upload
980 views

C ZTE MSAN Configuration Script

The document provides configuration steps for setting up a ZTE MSAN device, including: 1. Deleting old configuration files, rebooting, and connecting to the device via serial cable. 2. Configuring hardware settings like racks, shelves, and service cards. 3. Configuring VLANs, UAPS port protection, interfaces, routing, and SNMP. 4. Configuring VoIP settings like MGCP, SIP, RTP, conferencing, and call waiting. 5. Configuring ADSL interfaces and port mappings. 6. Enabling automatic saving of the configuration file.

Uploaded by

Gamal Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
980 views

C ZTE MSAN Configuration Script

The document provides configuration steps for setting up a ZTE MSAN device, including: 1. Deleting old configuration files, rebooting, and connecting to the device via serial cable. 2. Configuring hardware settings like racks, shelves, and service cards. 3. Configuring VLANs, UAPS port protection, interfaces, routing, and SNMP. 4. Configuring VoIP settings like MGCP, SIP, RTP, conferencing, and call waiting. 5. Configuring ADSL interfaces and port mappings. 6. Enabling automatic saving of the configuration file.

Uploaded by

Gamal Ahmed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 10

file delete cfg startrun.dat *.

file delete V0100 *.*

file delete V0101 *.*

reboot

##connect to msan with serial cable

Enable

Password :zxr10

Config t

username zte password zte privilege 15

H/W configuration

con t

add-rack rackno 1 racktype ETSI21

add-shelf rackno 1 shelfno 1 shelftype ETSI_SHELF

del-subcard rackno 1 shelfno 1 slotno 10 subcardno 1

add-subcard rackno 1 shelfno 1 slotno 10 subcardno 1 VOIP

set-pnp enable configure automatic hardware

OR configure service card one by one


add-card rackno 1 shelfno 1 slotno 2 acwv

add-card rackno 1 shelfno 1 slotno 3 acwv

add-card rackno 1 shelfno 1 slotno 4 acwk

add-card rackno 1 shelfno 1 slotno 5 acwk

add-card rackno 1 shelfno 1 slotno 6 acwk

add-card rackno 1 shelfno 1 slotno 7 acwk

add-card rackno 1 shelfno 1 slotno 8 acwk

add-card rackno 1 shelfno 1 slotno 4 ptwv

add-card rackno 1 shelfno 1 slotno 5 ptwv

add-card rackno 1 shelfno 1 slotno 6 ptwv

add-card rackno 1 shelfno 1 slotno 7 ptwv

add-card rackno 1 shelfno 1 slotno 8 ptwv

add-card rackno 1 shelfno 1 slotno 9 ptwv

add-card rackno 1 shelfno 1 slotno 12 ptwv

add-card rackno 1 shelfno 1 slotno 13 ptwv

add-card rackno 1 shelfno 1 slotno 14 ptwv

add-card rackno 1 shelfno 1 slotno 21 GCFD

add-card rackno 1 shelfno 1 slotno 22 GCFD


conf t

vlan data

vlan 943,942,400,413

exit

UAPS configuration

uaps-group 1

port master-port gei_1/0/1 slave-port gei_1/1/1

revertive disable

protect-time 0

port-optical-tx-control enable

switch-type common-port

interface gei_1/0/1

no shutdown

switchport vlan 943,942,400,413 tag

exit

interface gei_1/1/1

no shutdown

switchport vlan 943,942,400,413 tag

exit
interface vlan 942 management vlan

ip address 10.237.135.154 255.255.255.248 management ip

exit

interface vlan 943 voice vlan

ip address 10.236.135.154 255.255.255.248 voice ip

exit

interface vlan 400 tedata vlan

ip address 10.41.158.74 255.255.255.248 tedata ip

exit

ip route 0.0.0.0 0.0.0.0 10.236.135.153 voice gateway

ip route 10.27.8.0 255.255.255.224 10.237.135.153 management gateway

ip route 10.245.1.0 255.255.255.0 10.237.135.153 management gateway

ip route 10.245.0.0 255.255.0.0 10.237.135.153 management gateway

snmp-server community public view AllView rw

snmp-server community private view AllView rw


snmp-server host 10.27.8.3 version 2c public enable NOTIFICATIONS target-
addr-name 1

vlan 943

voip-bind

exit

Adsl configuration

interface adsl_1/2/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 101-164 one-to-one

exit

interface adsl_1/3/1-64
no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 165-228 one-to-one

exit

interface adsl_1/4/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 229-292 one-to-one

exit

interface adsl_1/5/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32


atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 293-356 one-to-one

exit

interface adsl_1/8/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 357-420 one-to-one

exit

interface adsl_1/9/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 421-484 one-to-one

exit
interface adsl_1/10/1-64

no shutdown

data-path-mode atm

atm pvc 2 vpi 0 vci 32

atm pvc 1 vpi 0 vci 35

switchport default vlan 413 pvc 1

switchport default cvlan 485-548 one-to-one

exit

SIP Commands

Msag

mgc add 1 10.241.105.168 port 5060 type 2

mg add 1 1 port 5060 domain-name ims.te.eg protocol-type 3


voip interface add ctrl-ip 10.236.135.154 ctrl-mask 255.255.255.248 media-
ip 10.236.135.154 media-mask 255.255.255.248

digitmap add 1 SIPDM digit-map [2-9]xxxxxxx|01[0-2]xxxxxxxx|


015xxxxxxSx|013xxxxxxx|03xxxxxxx|0[2-69]xxxxxxxx|04[057]xxxxxxSx|
050xxxxxxSx|09[56]xxxxxxSx|0900[0-689]xxx|09007xxxx|0800xxxxxxx|
080[1-9]x|08[2468]xxxxxxx|07xxxxxx|1[569]xxx|1[23478]x|10[02-9]|11[0-
8]|15[02-9]|119xx|10100[128]xxxxx.S|101003xxxxxxxxx.S|10100[4-
6]xxxxxxx.S|10100[79]xxxxxxxxxx.S|00[128]xxxxx.S|003xxxxxxxxx.S|00[4-
6]xxxxxxx.S|00[79]xxxxxxxxxx.S|ExxEx.F|FxxF|EFxxF|ExxF|EEEx|EEx.F|
ExxEx.Ex.F|ExxEx.Ex.Ex.F|FxxExxxxF|Fxx.Exxxx.F|ExxxEx.F|FxxxExxxxEx.F|
FxxEF|Exx.F|EFx.Ex.F|ExxxExxxxExxxxExxxxF mgid 1 servicetype 2

sip capability modify SPTIMER 0

sip proxy-server add 1 5060 10.241.105.168

sip user-agent add 1 1 port 5060 domname ims.te.eg

rtp terminationid add RTP/ 256 type 2 begin-no 0

media-nat add 6 1 6 5 5 10.236.135.154 20000

mgc type modify 2 dm-long 4 dm-short 3

conference call&call waiting

sip accesscode add mg 1 id 7 3

sip accesscode add mg 1 id 0 1

sip accesscode add mg 1 id 1 2

exit
EPM Configuration

#fan epm enable

#fan env-serial-baudrate 9600

Auto write configuration

(config)#auto-write enable

(config)#auto-write 1

You might also like