Scribd
Upload
54 views3 pages

9.an Integrated System For Regional

This document describes an integrated system for regional environmental monitoring and management based on the Internet of Things (IoT). The system uses sensors to monitor temperature, humidity, and light levels, and sends that data via wireless networks to a server. The server analyzes the sensor data and displays it on a webpage. RFID tags track the locations of individuals and relay that data along with the environmental readings. The goal is to remotely monitor and manage regional environmental conditions.

Uploaded by

Pooja Ban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
54 views3 pages

9.an Integrated System For Regional

This document describes an integrated system for regional environmental monitoring and management based on the Internet of Things (IoT). The system uses sensors to monitor temperature, humidity, and light levels, and sends that data via wireless networks to a server. The server analyzes the sensor data and displays it on a webpage. RFID tags track the locations of individuals and relay that data along with the environmental readings. The goal is to remotely monitor and manage regional environmental conditions.

Uploaded by

Pooja Ban
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

AN INTEGRATED SYSTEM FOR REGIONAL ENVIRONMENTAL MONITORING AND

MANAGEMENT BASED ON IOT

AIM:

The main aim of this project is to monitor and manage Regional Environmental parameters
based on Internet of Things.

BLOCK DIAGRAM:

LCD DISPLAY
POWER
SUPPLY (16*2 LINES)

GPRS
TEMPERATURE A (WEB PAGE)
SENSOR
R
GPS
M
HUMIDITY
SENSOR 7

RELAY
LIGHT
SENSOR

HOME
APPLIANCES
DESCRIPTION:

The proposed a system to monitor and management of environment conditions using RFID
and GPRS technologies. The system mainly uses three kinds of sensors as temperature,
humidity and light sensors. The distribution model of the sensors and RFID reader
determines the location and number of nodes in sensor placement should be established
according to the actual situation of attractions. Meteorological data is collected by sensing
devices, and passed by wireless sensor networks which are organized by Zigbee. And it will
pass to the server section and server section will monitor the node section. The each tourist
is given with an RFID tag so that the location of tourist can be monitored by using the RFID
reader connected at the each node with GPRS module. The server section collects the data
from the nodes and displays the data on the webpage. The data further analyzed. It
completes showing environment parameters data along with location of the particular
node. The tricking of the each tourist can be monitored.

HARDWARE REQUIRED:

 Micro controller
 LCD display
 RFID reader & tags
 GPRS module
 Temperature sensor
 Humidity sensor
 Light sensor

SOFTWARE REQUIRED:

 KEIL IDE
 EXPRESS PCB
 FLASH MAGIC
ADVANTAGE: Data collection supported by IOT but also in Web services and applications
based on cloud computing and e-Science platforms, and the effectiveness of monitoring
processes and decision-making can be improved.

You might also like