GEWI®Plus Geotechnical Systems

GEWI®Plus – Ground Anchors 30-75 mm

Advantages and Characteristics

■ Easy system handling ■ Easy removal of temporary anchors
through threaded sleeves
■ Simple restressing and destressing
through anchorage with nut ■ Flexibility in transport lengths by
Temporary GEWI®Plus Ground Anchor using couplers
■ Permanent corrosion protection
possible ■ High bond strength between
GEWI®Plus threadbar and
cement grout
corrosion
protection
■ High stiffness during installation
domed nut
■ Angle compensation using wedge
anchor plate
with steel tube washers

smooth sheathing ■ Quality assurance through internal

and external supervision of
production

Permanent GEWI®Plus Ground Anchor

GEWI®Plus bar

cement grout
spacer

domed nut

steel cap

anchor plate
with steel tube
injection adapter
profile ring
corrugated sheathing
GEWI®Plus bar
cement grout

smooth sheathing

corrugated sheathing

spacer

steel grade yield tensile nominal cross sectional weight load ultimate grout cap
strength strength diameter area per metre at yield load
[N/mm2] [N/mm2] [mm] [mm2] [kg/m] [kN] [kN]
GEWI®Plus 670 800 30 707 5.55 475 565
GEWI®Plus 670 800 35 962 7.55 640 770
GEWI®Plus 670 800 43 1,466 11.51 980 1,170
GEWI®Plus 670 800 57.5 2,597 20.38 1,740 2,080
GEWI®Plus 670 800 63.5 3,167 24.86 2,120 2,540
GEWI®Plus 670 800 75 4,418 34.68 2,960 3,535

2
 GEWI®Plus – Soil Nails 18-75 mm

GEWI®Plus Soil Nail Advantages and Characteristics

The essential advantages of the
GEWI®Plus soil nails are:
formed plate
■ High durability through double ■ Angle compensation up to
domed nut corrosion protection possible 20° through formed plate

■ Low susceptibility to corrosion ■ Flexibility in length by using couplers

■ Extension bars may be attached

by using couplers

■ Spacers ensure proper grout cover

■ High standard of quality control

from production stage to installation
of the soil nails ensures consistent
quality
GEWI®Plus bar

cement grout

spacer

GEWI®Plus Soil Nail

double corrosion protection
steel grade yield tensile nominal cross sectional weight load ultimate
strength strength diameter area per metre at yield load
[N/mm2] [N/mm2] [mm] [mm2] [kg/m] [kN] [kN]
domed
GEWI®Plus 670 800 18 250 1.96 170 200
nut
GEWI®Plus 670 800 22 375 2.94 250 300
GEWI®Plus 670 800 25 491 3.85 330 390
GEWI®Plus 670 800 28 616 4.83 410 490
GEWI®Plus 670 800 30 707 5.55 475 565
GEWI®Plus 670 800 35 962 7.55 640 770
formed
GEWI®Plus 670 800 43 1,466 11.51 980 1,170
plate
GEWI®Plus 670 800 57.5 2,597 20.38 1,740 2,080
GEWI®Plus 670 800 63.5 3,167 24.86 2,120 2,540
GEWI®Plus 670 800 75 4,418 34.68 2,960 3,535

GEWI®Plus bar

cement grout

corrugated sheathing
structural concrete
or shotcrete

spacer

3
GEWI®Plus – Piles 28-75 mm

Advantages and Characteristics GEWI®Plus Pile GEWI®Plus Pile

The DYWIDAG GEWI®Plus pile is a double corrosion protection
drilled micropile with a central steel
element based on the GEWI®Plus
threadbar with hot-rolled, continuous
thread deformations on both sides. The additional
GEWI®Plus threadbar is encapsulated reinforcement for anchor nut with
compression pile plate and lock nut
in cement grout which acts both as
corrosion protection and as load
transfer into the soil or rock. end-anchorage additional
with lock nut reinforcement
for tension pile
■ Excellent load transfer into concrete
structures by means of anchoring
elements

■ Tensile, compressive and alternating pile neck protection

loads can be efficiently transferred to corrugated
the structure sheathing

■ The coarse GEWI®Plus thread

guarantees maximum bond between
steel and cement grout GEWI®Plus bar

■ The stress-strain curve of the spacer

GEWI®Plus bar shows high ductility

■ Settlement can be prevented by

using preloaded GEWI®Plus piles
spacer
■ Load transfer into soil optimized by cement grout
post-grouting

■ Double corrosion protected piles

can be used for high corrosion
impact like in aggressive media GEWI®Plus bar
such as seawater or contaminated
ground
coupler
■ Can be cut off or coupled at
any given point

■ A small drill hole diameter permits

economic drilling equipment

■ robust coarse thread remains

threadable even when dirty or
damaged GEWI®Plus bar

steel grade yield tensile nominal cross sectional weight load ultimate
strength strength diameter area per metre at yield load
[N/mm2] [N/mm2] [mm] [mm2] [kg/m] [kN] [kN]
GEWI®Plus 670 800 28 616 4.83 410 490
GEWI®Plus 670 800 30 707 5.55 475 565
GEWI®Plus 670 800 35 962 7.55 640 770
GEWI®Plus 670 800 43 1,466 11.51 980 1,170
GEWI®Plus 670 800 57.5 2,597 20.38 1,740 2,080
GEWI®Plus 670 800 63.5 3,167 24.86 2,120 2,540
GEWI®Plus 670 800 75 4,418 34.68 2,960 3,535
4
GEWI®Plus – the ultimate in threadbar technology

The booming market of geotechnical

systems needs higher performance!

DYWIDAG-SYSTEMS INTERNATIONAL
faces this challenge. With the new
GEWI®Plus systems we present the
latest stage of threadbar technology for
ground works:

■ complete systems for piles, anchors,

rock bolts and soil nails

■ bar diameters from 18 to 75 mm

■ yield loads from 160 to 2,960 kN

■ ultimate loads from 200 to 3,535 kN

■ all systems in accordance with the

latest European standards and
provisional European standards

■ corrosion protection systems

complying with the latest
developments and European stan-
dards

■ yield strength: 670 N/mm2 –

an increase of 34% compared to
standard GEWI® rebars (500 N/mm2)
These factors bring big advantages during transport
■ ultimate strength: 800N/mm2 – and in handling.
an increase of 45% compared to
standard GEWI® rebars (550 N/mm2) ■ the robust GEWI®Plus thread is specially designed
for rough site conditions
■ for the same design load
you will save about 25% of ■ the right-hand thread over the full length offers the
steel quantity compared possibility to fix and couple the bars at any point.
to standard GEWI® rebars Adaptions to varying conditions are very easy and
can be done quickly on site

■ in spite of the high strengths, GEWI®Plus is not

sensitive to stress crack corrosion and hydrogen
induced embrittlement

■ GEWI®Plus is fully integrated in the quality

assurance system of DYWIDAG-SYSTEMS
INTERNATIONAL – all our workshops are
certificated to DIN EN ISO 9001

■ DYWIDAG-SYSTEMS INTERNATIONAL is the

inventor of the GEWI® thread, we have all the
know-how in this business. As the producer of the
systems for more than 30 years we can help you
with our experience and show you a solution for
almost every problem that you will face on site

GEWI®Plus –
a system for the future
5
HQ Construction Europe ARGENTINA

Details, dimensions and system designs are subject to change without notice.
AUSTRALIA
DYWIDAG-SYSTEMS
INTERNATIONAL GMBH AUSTRIA
Siemensstrasse 8 BELGIUM
85716 Unterschleissheim
Germany
BOSNIA AND HERZEGOVINA
Phone +49-89-30 90 50-100 BRAZIL
Fax +49-89-30 90 50-120 CANADA
E-mail: [email protected]
www.dywidag-systems.com CHILE
CHINA
COLOMBIA
C O S TA R I C A
C R O AT I A
CZECH REPUBLIC
DENMARK
EGYPT
Austria Norway
DYWIDAG-SYSTEMS DYWIDAG-SYSTEMS
ESTONIA
INTERNATIONAL GMBH INTERNATIONAL A/S FINLAND
Niederlassung Salzburg Undustrieveien 7A
Christophorusstrasse 12 1483 Skytta, Norway FRANCE
5061 Elsbethen/Salzburg, Austria Phone +47-67-06 15 60
Phone +43-662-62 57 97 Fax +47-67-06 15 59
GERMANY
Fax +43-662-62 86 72 E-mail: [email protected] GREECE
E-mail: [email protected]
www.dywidag-systems.at Portugal G U AT E M A L A
DYWIDAG-SYSTEMS HONDURAS
Belgium and Luxembourg INTERNATIONAL Lda
DYWIDAG-SYSTEMS Rua do Polo Sul HONG KONG
INTERNATIONAL N.V. Lote 1.01.1.1-2B
Industrieweg 25 1990-273 Lisboa, Portugal INDONESIA
3190 Boortmeerbeek, Belgium Phone +351-21-892 28 90 IRAN
Phone +32-16-60 77 60 Fax +351-21-892 28 99
Fax +32-16-60 77 66 E-mail: [email protected] I TA LY
E-mail: [email protected]
Spain J A PA N
France DYWIDAG SISTEMAS CONSTRUCTIVOS, KOREA
DSI-Artéon S.A.
Avenue du Bicentenaire Avenida de la Industria, 4 LEBANON
ZI Dagneaux-BP 50053 Pol. Ind. La Cantuena
01122 Montluel Cedex 28947 Fuenlabrada (MADRID), Spain LUXEMBOURG
France Phone +34-91-642 20 72 M A L AY S I A
Phone +33-4-78 79 27 82 Fax +34-91-642 27 10
Fax +33-1-78 79 01 56 E-mail: dywidag MEXICO
E-mail: [email protected] @dywidag-sistemas.com
www.dywidag.fr www.dywidag-sistemas.com NETHERLANDS
N O R W AY
Italy Switzerland
DYWIT S·P·A SpannStahl AG OMAN
Via Albricci, 5 Industriegebiet
20122 Milano, Italy Waesseristrasse 29 PA N A M A
Phone +39-02-72 00 06 77 8340 Hinwil/ZH, Switzerland PA R A G U AY
Fax +39-02-86 93 93 5 Phone +41-1-938 97 97
E-mail: [email protected] Fax +41-1-938 97 90 PERU
E-mail: [email protected]
www.spannstahl.ch
POLAND
Netherlands
DYWIDAG-SYSTEMS PORTUGAL
INTERNATIONAL B.V United Kingdom
Veilingweg 2 DYWIDAG-SYSTEMS Q ATA R
5301 KM Zaltbommel INTERNATIONAL LTD. RUSSIA
Netherlands Northfield Road
Phone +31-418-57 89 22 Southam, Warwickshire SAUDI ARABIA
Fax +31-418-51 30 12 CV47 OFG, Great Britain
E-mail: [email protected] Phone +44-1926-81 39 80 SINGAPORE
www.dsi-nl.nl Fax +44-1926-81 38 17 SOUTH AFRICA
E-mail: [email protected]
www.dywidag-systems.com/uk S PA I N
SWEDEN
SWITZERLAND
TA I W A N
THAILAND
TURKEY
04173-1/03.08-3.000 go se

U N I T E D A R A B E M I R AT E S
UNITED KINGDOM
U R U G U AY
USA
VENEZUELA

w w w. d y w i d a g - s y s t e m s . c o m