0% found this document useful (0 votes)
52 views3 pages

Data Sheet 6ES7431-1KF20-0AB0: Supply Voltage

Uploaded by

melad yousef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
52 views3 pages

Data Sheet 6ES7431-1KF20-0AB0: Supply Voltage

Uploaded by

melad yousef
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Data sheet 6ES7431-1KF20-0AB0

SIMATIC S7-400, analog input SM 431, isolated 8 AI, resolution 14


bit, U/IResistor 8 AI, cycle time 0.416 ms

Supply voltage
Load voltage L+
● Rated value (DC) 24 V; Only required for supplying 2-wire transmitters
● Reverse polarity protection Yes

Input current
from load voltage L+ (without load), max. 200 mA; for 8 connected, fully controlled 2-wire transmitters
from backplane bus 5 V DC, max. 1 000 mA

Power loss
Power loss, typ. 4.9 W

Analog inputs
Number of analog inputs 8
● For voltage/current measurement 8
● For resistance measurement 4
permissible input voltage for voltage input 18 V; 18 V continuous, 75 V for 1 ms (mark to space ratio 1:20)
(destruction limit), max.

6ES7431-1KF20-0AB0 Subject to change without notice


Page 1/3 01/19/2019 © Copyright Siemens
permissible input current for current input (destruction 40 mA; Permanent
limit), max.
Input ranges
● Voltage Yes
● Current Yes
● Thermocouple No
● Resistance thermometer No
● Resistance Yes
Input ranges (rated values), voltages
● 1 V to 5 V Yes
● Input resistance (1 V to 5 V) 10 MΩ
● -1 V to +1 V Yes
● Input resistance (-1 V to +1 V) 10 MΩ
● -10 V to +10 V Yes
● Input resistance (-10 V to +10 V) 100 kΩ
Input ranges (rated values), currents
● -20 mA to +20 mA Yes
● Input resistance (-20 mA to +20 mA) 50 Ω
● 4 mA to 20 mA Yes
● Input resistance (4 mA to 20 mA) 50 kΩ
Input ranges (rated values), resistors
● 0 to 600 ohms Yes
Cable length
● shielded, max. 200 m

Analog value generation for the inputs


Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), 14 bit; 14 / 14 / 14
max.
● Integration time, parameterizable Yes
● Basic conversion time (ms) 52 µs
● Interference voltage suppression for none / 400 / 60 / 50 Hz
interference frequency f1 in Hz

Encoder
Connection of signal encoders
● for voltage measurement Yes; possible
● for current measurement as 2-wire transducer Yes
● for current measurement as 4-wire transducer Yes
● for resistance measurement with two-wire Yes; Line resistances are also measured
connection
● for resistance measurement with three-wire Yes; Line resistances are also measured
connection

6ES7431-1KF20-0AB0 Subject to change without notice


Page 2/3 01/19/2019 © Copyright Siemens
● for resistance measurement with four-wire Yes
connection

Errors/accuracies
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-) 0.7 %; ±0.7 % at ±1 V; ±0.9 % at ±10 V, 1 to 5 V
● Current, relative to input range, (+/-) 0.8 %; at ±20 mA, 4 to 20 mA
● Resistance, relative to input range, (+/-) 1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-) 0.6 %; 0.6 % at ±1 V; 0.75 % at ±10 V, 1 to 5 V
● Current, relative to input range, (+/-) 0.7 %; at ±20 mA, 4 to 20 mA
● Resistance, relative to input range, (+/-) 0.7 %; 0 to 600 ohms

Potential separation
Potential separation analog inputs
● Potential separation analog inputs Yes; internal/external
● between the channels No

Isolation
Isolation tested with 2 120 V DC between bus and analog section; 500 V DC between
bus and local ground; 500 V DC between analog part and L+/M; 2
120 V DC between analog part and local ground; 2 120 V DC
between L+/M and local ground

Dimensions
Width 25 mm
Height 290 mm
Depth 210 mm

Weights
Weight, approx. 500 g

last modified: 01/17/2019

6ES7431-1KF20-0AB0 Subject to change without notice


Page 3/3 01/19/2019 © Copyright Siemens

You might also like