Design calculation sheet

Project no.: Date: Sheet no.: of Computed by:

Checked by:
Subject:
Approved by:

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 27.2 t Stirrups steel yield strength (fy) = 2812 Kg/cm2
Breadth of section (bw) = 33.02 cm Concrete cylinder strength (f'c) = 211 Kg/cm2
Depth of section (d) = 50.8 cm Concrete cube strength (fcu) = 264 Kg/cm2
Spacing of stirrups (s) = 15.748 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 12.92 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 23.35 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 51.69 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.65 cm 2
ACI 11.5.5.3
Required stirrups area (Av) = 2.57 cm2 ACI 11.5.6
Required stirrups area per leg = 1.29 cm2 ACI 11.5.6 F 14 @ 157 mm 2 legs

478244602.xls - Rev. 0 05/31/2020

478244602.xls - Rev. 0 05/31/2020
Design calculation sheet
Project no.: Date: Sheet no.: of Computed by:

Checked by:
Subject:
Approved by:

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 20 t Stirrups steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (bw) = 30 cm Concrete cylinder strength (f'c) = 400 Kg/cm2
Depth of section (d) = 70 cm Concrete cube strength (fcu) = 500 Kg/cm2
Spacing of stirrups (s) = 20 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 22.27 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 4.39 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 89.09 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.57 cm2 ACI 11.5.5.3
Required stirrups area (Av) = 0.57 cm2 ACI 11.5.6
Required stirrups area per leg = 0.28 cm2 ACI 11.5.6 F 8 @ 200 mm 2 legs

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 20 t Stirrups steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (bw) = 30 cm Concrete cylinder strength (f'c) = 400 Kg/cm2
Depth of section (d) = 70 cm Concrete cube strength (fcu) = 500 Kg/cm2
Spacing of stirrups (s) = 20 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 22.27 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 4.39 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 89.09 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.57 cm 2
ACI 11.5.5.3
Required stirrups area (Av) = 0.57 cm 2
ACI 11.5.6
Required stirrups area per leg = 0.28 cm2 ACI 11.5.6 F 8 @ 200 mm 2 legs

478244602.xls 05/31/2020
478244602.xls 05/31/2020
Design calculation sheet
Project no.: Date: Sheet no.: of Computed by:

Checked by:
Subject:
Approved by:

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 20 t Stirrups steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (bw) = 30 cm Concrete cylinder strength (f'c) = 400 Kg/cm2
Depth of section (d) = 70 cm Concrete cube strength (fcu) = 500 Kg/cm2
Spacing of stirrups (s) = 20 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 22.27 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 4.39 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 89.09 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.57 cm2 ACI 11.5.5.3
Required stirrups area (Av) = 0.57 cm2 ACI 11.5.6
Required stirrups area per leg = 0.28 cm2 ACI 11.5.6 F 8 @ 200 mm 2 legs

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 20 t Stirrups steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (bw) = 30 cm Concrete cylinder strength (f'c) = 400 Kg/cm2
Depth of section (d) = 70 cm Concrete cube strength (fcu) = 500 Kg/cm2
Spacing of stirrups (s) = 20 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 22.27 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 4.39 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 89.09 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.57 cm2 ACI 11.5.5.3
Required stirrups area (Av) = 0.57 cm2 ACI 11.5.6
Required stirrups area per leg = 0.28 cm2 ACI 11.5.6 F 8 @ 200 mm 2 legs

SHEAR DESIGN of a Non-Prestressed Reinforced Concrete Section According to ACI 318-02

Section ID:
Dimensions & Shear Materials
Ultimate shear force (Vu) = 20 t Stirrups steel yield strength (fy) = 4200 Kg/cm2
Breadth of section (bw) = 30 cm Concrete cylinder strength (f'c) = 400 Kg/cm2
Depth of section (d) = 70 cm Concrete cube strength (fcu) = 500 Kg/cm2
Spacing of stirrups (s) = 20 cm
Number of legs (n) = 2
Design
Concrete shear strength (Vc) = 22.27 t ACI 11.3.1.1
Stirrups shear strength (Vs) = 4.39 t ACI 11.5.6.1
Max. shear strength allowed by stirrups = 89.09 t ACI 11.5.6.9
Minimum stirrups area (Av min) = 0.57 cm 2
ACI 11.5.5.3

478244602.xls 05/31/2020
Required stirrups area (Av) = 0.57 cm2 ACI 11.5.6
Required stirrups area per leg = 0.28 cm2 ACI 11.5.6 F 8 @ 200 mm 2 legs

478244602.xls 05/31/2020