Scribd
Upload
192 views

Hog-163 Encoder BAUMER PDF

This document provides information on the HOG 16 and HOG 163 incremental encoders. Both models have hollow shafts from 20-75mm in diameter and resolutions from 250-5000 pulses. The HOG 16 has an operating temperature range of -20°C to 100°C while the HOG 163's range is -30°C to 85°C. Both encoders provide TTL and HTL output signals and optional configurations like redundant output or heating.

Uploaded by

thanggimme.phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views

Hog-163 Encoder BAUMER PDF

This document provides information on the HOG 16 and HOG 163 incremental encoders. Both models have hollow shafts from 20-75mm in diameter and resolutions from 250-5000 pulses. The HOG 16 has an operating temperature range of -20°C to 100°C while the HOG 163's range is -30°C to 85°C. Both encoders provide TTL and HTL output signals and optional configurations like redundant output or heating.

Uploaded by

thanggimme.phan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Incremental encoders

Hollow shaft ø20 to ø75 mm


Resolution 250...5000 pulses

HOG 16, HOG 163

Features
–– Encoder with hollow shaft ø20-75 mm
–– Optical sensing
–– Robust light-metal housing
–– Logic level TTL with regulator UB 9...26 VDC
–– Logic level HTL with power line driver
–– Special protection against corrosion
–– Big terminal box, pivotable through 180°

Optional
–– Redundant configuration
–– Heating for applications of min. -50 °C (HOG 163, no
HOG 163 explosion protection)

Technical data - electrical ratings Technical data - mechanical design


Voltage supply 5 VDC ±5 % Housing ø158 mm
9...26 VDC Operating speed ≤6000 rpm (mechanical)
9...30 VDC
Materials Housing: aluminium alloy
Consumption w/o load ≤100 mA Shaft: stainless steel
Phase shift 90° ±20°
HOG 16
Scan ratio 40...60 %
Shaft ø20...38 mm hollow shaft
Reference signal Zero pulse, width 90°
Admitted shaft load ≤400 N axial, ≤600 N radial
Sensing method Optical
Protection DIN EN 60529 IP 66
Output frequency ≤120 kHz
Operating torque typ. 15 Ncm
Output signals K1, K2, K0 + inverted
Rotor moment of inertia 4.9 kgcm² (ø25)
Output circuit TTL (RS422)
HTL (power line driver) Operating temperature -20...+100 °C

Interference immunity DIN EN 61000-6-2 Resistance DIN EN 60068-2-6


Vibration 15 g, 10-2000 Hz
Emitted interference DIN EN 61000-6-4 DIN EN 60068-2-27
Approval UL approval / E256710 Shock 300 g, 6 ms

Subject to modification in technic and design. Errors and omissions excepted.


HOG 16 Explosion protection II3G Ex nA T4 X (gas)
II3D Ex tD IP66 A22 T135°C X
Resolution (steps/turn) 250...2500 (dust)
HOG 163 Weight approx. 4 kg
Resolution (steps/turn) 250...5000 HOG 163
Shaft ø38...75 mm hollow shaft
Admitted shaft load ≤350 N axial, ≤500 N radial
Protection DIN EN 60529 IP 56
Operating torque typ. 17 Ncm
Rotor moment of inertia 28.5 kgcm² (ø50)
Operating temperature -30...+85 °C
Resistance DIN EN 60068-2-6
Vibration 10 g, 10-2000 Hz
DIN EN 60068-2-27
Shock 100 g, 6 ms
Explosion protection II3G Ex nA T4 X (gas)
II3D Ex tD IP56 A22 T135°C X
(dust)
Weight approx. 4.3 kg (ø48), 3.2 kg (ø75)
20/12/2010

1 www.baumer.com/motion
Incremental encoders
Hollow shaft ø20 to ø75 mm
Resolution 250...5000 pulses

HOG 16, HOG 163

Part number

HOG 16 HOG 163

Voltage supply / signals Voltage supply / signals


I 9...30 VDC / output level I 9...30 VDC / output level
HTL with inverted signals HTL with inverted signals
TTL 5 VDC / output level TTL TTL 5 VDC / output level TTL
with inverted signals with inverted signals
R 9...26 VDC / output level R 9...26 VDC / output level
TTL with inverted signals TTL with inverted signals
(for output signals DN) (for output signals DN)

See part number (pulses) See part number (pulses)

Output signals Output signals


D K1, K2 D K1, K2
DN K1, K2, K0 DN K1, K2, K0

Part number (pulses) Part number (pulses)


250 512 1000 1080 2048 250 600 1080 2048
500 600 1024 1200 2500 500 1000 1200 4096
Other pulse numbers upon request. 512 1024 1250 5000
Other pulse numbers upon request.

Accessories
Connectors and cables
HEK 8 Sensor cable for encoders
Mounting accessories
ET.51.100x Torque arm size M6
Diagnostic accessories

Subject to modification in technic and design. Errors and omissions excepted.


HENQ 1100 Analyzer for encoders

20/12/2010

2 www.baumer.com/motion
Incremental encoders
Hollow shaft ø20 to ø75 mm
Resolution 250...5000 pulses

HOG 16, HOG 163

Output signals Terminal assignment

at positive direction of rotation View A - Connecting terminal in terminal box

K1

K1
K0
K0
K2 K2
K2
K1
K2
K1
(GND)
K0 +UB
90°
zero pulse

K0
zero pulse

Subject to modification in technic and design. Errors and omissions excepted.


20/12/2010

3 www.baumer.com/motion
Incremental encoders
Hollow shaft ø20 to ø75 mm
Resolution 250...5000 pulses

HOG 16, HOG 163

Dimensions

HOG 16
positive direction of rotation

ø
ø 20-38H7

36 a/f

A
ø

M20x1.5
accessory
HM97M24314

HOG 163
positive direction of rotation

A
ø 38-75H7
ø 59-100
ø

M20x1.5

accessory

Subject to modification in technic and design. Errors and omissions excepted.


HM08M28559
ø

20/12/2010

4 www.baumer.com/motion

You might also like