Scribd
Upload
22 views1 page

Constructing A SDOF Bilinear Model

The figure shows a load-displacement graph with 4 branches representing the elastic and plastic behavior of a material. Branch 1 shows the linear-elastic response. Branch 2 indicates the yield point and onset of plasticity. Branch 3 represents strain hardening. Branch 4 is plastic displacement at 30% overstrength load.

Uploaded by

Fady W. Iskander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Constructing A SDOF Bilinear Model

The figure shows a load-displacement graph with 4 branches representing the elastic and plastic behavior of a material. Branch 1 shows the linear-elastic response. Branch 2 indicates the yield point and onset of plasticity. Branch 3 represents strain hardening. Branch 4 is plastic displacement at 30% overstrength load.

Uploaded by

Fady W. Iskander
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Result from elastic model

Line representing the 30% overstrength

Plastic displacement

2
1

F
kN
3
4
Branch 2
Branch 1
Start of the yield point

Figure 1

0
Displacement mm

He

You might also like