DISCLAIMER

DO NOT NECESSARILY SCALE FROM THIS DRAWING

PLEASE NOTE THAT ALL BEDROOM
ENTRANCE(EXTERIOR) OPTIONS ENTRANCE(INTERIOR) OPTIONS MAIDS QUARTERS LAUNDRY CIRCUITS SHOULD BE SWITCHED
All dimension to be verified on site and any discrepancies to be reported in writing to the
FROM BOTH PEDESTALS AS WELL - 3
designer before proceeding with work. All dimensions should be read from those values
WAY
GREEN CIRCUIT FOR FOOTLIGHT stated in text on the drawing.
SHOULD BE ON SENSORS ONLY GREEN CIRCUIT FOR TAPE LIGHT
AND NOT HAVE A SWITCHED UNDER BED SHOULD BE ON All area dimensions should be read as and can only be verified by a detailed survey of the
LEVER SENSORS ONLY AND NOT HAVE A completed building. Any decisions to be made on the basis of area information shown on
SWITCHED LEVER the drawing should include allowances for increases and/or decreases inherent in the
design development and
building process.

AC SPLIT UNIT CONSTANT FEED

1W-6L All materials and construction must comply with all the national building regulations (Act
No. 103 Of 1977) including all amendments as well as the by-laws of the local authorities.
CONSTANT FEED
FOR SENSOR BIC SCULLERY FOR SENSOR BIC
LIGHTING MAIN KITCHEN
PLEASE NOTE: LIGHTING
EXTERNAL 4 X WALL
LIGHTS TO BE
CONNECTED TO GENERAL NOTES
GENERAL BUILDING 2W-6L CONSTANT FEED
(COMPLEX) LIGHTING
FOR SENSOR BIC SA
S GENERAL NOTES/ SPECIFICATIONS:
MAIN KITCHEN SCULLERY LIGHTING SA SENSOR FOR
BIC LIGHTING SENSOR FOR SENSOR FOR
LOW LEVEL
LIGHTING IN LIGHTING S S LIGHTING PLEASE NOTE THAT THE TAPE LIGHT CALCULATIONS
2W-5L 2W-8L UNDER BED UNDER BED
EN SUITE ON PLAN EXCLUDE THE FOLLOWING:
SA 1. UNDER BED TAPE LIGHT
SA

LAUNDRY
EN SUITE 1 2. LED SKIRTINGS
3. UNDER COUNTER LED'S/BIC'S
4. VANITIES & MIRRORS

AC UNIT
5. SHOWER RECESSES
BEDROOM 1
RA
POINT TO
LIGHT WELL 3W-8L
ILLUMINATED
SKIRTING CONSTANT FEED
FOR SENSOR BIC LIGHTING

POSITION FOR
TOUCH SCREEN
3W-12L
DINING AREA STUDY GUEST TOILET BIC LIGHTING

RA
CONSTANT FEED
FOR SENSOR BIC SA
2W-6L LIGHTING
SA

ENTRANCE POINT TO
AC UNIT ILLUMINATED
3W-8L POINT TO
ILLUMINATED
SKIRTING
REVISION SPECIFICATIONS
SKIRTING

INFORMAL REV NO REV DATE REV BY REV NOTES

SA LOUNGE MAIN LOUNGE 001 31.03.20 NS - AMENDED MAIDS QUARTERS

DOUBLE VOLUME DINING AREA & LOUNGE AMENDED
FIBRE LOUNGE WALL LIGHTING
TO UPSTAIRS
- AMENDED DINING
SWITCH SIDEBOARD WALL LIGHT
1W-10L POITNS
SA
- AMENDED STAIRCASE
AC SPLIT UNIT LIGHTING
ENTRANCE POINT TO
- AMENDED DOUBLE VOL
ILLUMINATED
CONSTANT
FEED 3W-6L
SKIRTING WALL LIGHTING POINT
FOR AC UNIT - AMENDED MAIN KITCHEN
SENSOR SA
RA AC UNIT POINTS
DOMESTIC BIC
LIGHTING
RA 002 03.04.20 NS - AMENDED ENTRANCE
QUARTERS 1W-4L ONYX FEATURE WALL
1W-11L LIGHTING
SKIRTING LIGHTING 003 23.04.20 NS - AMENDED ALL LIGHTING &
MAIN BEDROOM GUEST CONSTANT FEED 1W-11L
3W-13L CIRCUITS QUANTITIES
CONSTANT FEED FOR SENSOR BIC LIGHTING
AC UNIT TOILET CONSTANT FOR SENSOR BIC LIGHTING
FEED SENSOR FOR LOW LEVEL LIGHTING IN DRESSING ROOM
POINT TO
1W-3L FOR TO ILLUMINATED ILLUMINATED
SENSOR BIC SKIRTING S SKIRTING SA
EN SUITE 2 LIGHTING

POSITION FOR
TOUCH SCREEN
SENSOR FOR
SA LOW LEVEL
BEDROOM 2 CONSTANT FEED LIGHTING IN SENSOR SENSOR

SENSOR FOR
SENSOR
FOR LOW
FOR SENSOR BIC LIGHTING
S
DRESSING
ROOM
S FOR
LIGHTING
FOR
LIGHTING
S CLIENT DETAILS
1W-5L LIGHTING S MAIN EN SUITE S RA
LEVEL AC UNIT
UNDER UNDER
EN SUITE LIGHTING IN GREEN CIRCUIT FOR LED SKIRTING

SENSOR FOR LOW LEVEL LIGHTING

UNDER BED CLIENT

IN EN SUITE
BED BED
S EN SUITE
LINEAR & SKIRTING UNDER BIC'S SHOULD BE ON
SENSORS ONLY AND NOT HAVE A
PROVISION FOR
CCTV POINT
LIGHTING
SWITCHED LEVER MAIN BEDROOM AHMED MULLA
C SA
DRESSING ROOM & MAIN EN SUITE SENSOR FOR POINTS TO
STUDY LIGHTING S SENSOR FOR LOW GO BACK TO
UNDER BED LEVEL LIGHTING IN
TOILET
LIGHT
SWITCH
S SA CONTACT
SENSOR FOR LOW LEVEL LIGHTING IN DRESSING ROOM CONSTANT FEED
CONSTANT FEED TEL/MOBILE:
FOR SENSOR BIC S CONSTANT FEED
FOR SENSOR BIC
LIGHTING
LIGHTING LINEAR & SKIRTING
FOR SENSOR BIC SA LIGHTING
LIGHTING PROJECT UNIT 201 | BLOCK A | NONOTI PLACE,
SKIRTING LIGHTING ADDRESS: BEREA, DURBAN
PLEASE NOTE THAT ALL BEDROOM
ORANGE CIRCUIT FOR FOOT LIGHT
SHOULD BE ON A SENSOR ONLY AND
GREEN CIRCUIT FOR FOOTLIGHT
SHOULD BE ON SENSORS ONLY
DRESSING ROOM CIRCUITS SHOULD BE SWITCHED
FROM BOTH PEDESTALS AS WELL - 3 PROJECT TITLE:
NOT HAVE A SWITCHED LEVER AND NOT HAVE A SWITCHED ORANGE POINTS FOR SWITCHED
WAY
PLEASE NOTE THAT ALL BEDROOM LEVER LED SKIRTING UNDER SIDE BIC'S
CIRCUITS SHOULD BE SWITCHED AND VERTICAL LINEAR LIGHTS
GREEN CIRCUIT FOR TAPE LIGHT
FROM BOTH PEDESTALS AS WELL - 3 SHOULD EXIT AT FLOOR LEVEL AND
UNDER BED SHOULD BE ON
RENOVATIONS TO EXISTING RESIDENCE
WAY RUN BELOW BIC CARCASSES TO
SENSORS ONLY AND NOT HAVE A
FINAL POSITION - FINAL POSITIONS
SWITCHED LEVER
GREEN CIRCUIT FOR TAPE LIGHT FOR LINEAR LIGHTING ON BIC PLAN
UNDER BED SHOULD BE ON
BEDROOM 1 & EN SUITE 1 SENSORS ONLY AND NOT HAVE A
SWITCHED LEVER

DRAWING DETAILS
DRAWING TITLE:

LIGHTING / TAPE LIGHT CALCULATIONS

GROUND FLOOR

BEDROOM 2 & EN SUITE 2 MEZZANINE

SCALE ORIGIN DATE ORIGINATOR

1:50 23 APRIL 2020 N.S

DRAWING NO REVISION PAGES

MU01 003 001

DESIGNER: KAREN ROBERT INTERIORS
DESIGN SHOWN IS COPYRIGHT OF THE DESIGNER

BEDROOM 2 & EN SUITE 2 INSIDE ROOF

BEDROOM 1 CEILING INSPIRATION DOUBLE VOLUME & LOUNGE CEILING MAIN BEDROOM, DRESSING ROOM & BEDROOM 2 CEILING INSPIRATION GUEST TOILET CEILING DINING AREA & KITCHEN INSPIRATION
INSPIRATION BATHROOM CEILING INSPIRATION INSPIRATION