Scribd
Upload
353 views

Armflex Rubber Expansion Joint: No. Name

The document describes the Armflex rubber expansion joint with a single-sphere connection and floating flanges. It lists the materials used for different parts including stainless steel, PVC, carbon steel, and synthetic rubber. It then provides the specifications for 14 different models of the expansion joint, including their sizes and allowed movements for axial compression, elongation, transverse movement, and angular deflection.

Uploaded by

Amir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
353 views

Armflex Rubber Expansion Joint: No. Name

The document describes the Armflex rubber expansion joint with a single-sphere connection and floating flanges. It lists the materials used for different parts including stainless steel, PVC, carbon steel, and synthetic rubber. It then provides the specifications for 14 different models of the expansion joint, including their sizes and allowed movements for axial compression, elongation, transverse movement, and angular deflection.

Uploaded by

Amir
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Armflex Rubber Expansion Joint

No. AMS SERIES


SINGLE-SPHERE CONNECTION
Name
with Floating Flanges

SYMBOL PART ENGINEERING MATERIAL


1 FLANGES SS41 / PVC / SUS316
2 WIRE CARBON STEEL WIRES STRAND
3 ELASTOMER SPECIAL SYNTHETIC RUBBER
4 REINFORCING FARBIC SYNTHETIC FIBER

Size Allowable Movements


Item L DØ FØ Axial Trans Angular
(In)
Comp Elong Move Deflection
AMS-101 1" 95mm 25mm 50mm 8mm 4mm 8mm 15°
AMS-101Q 1-1/4" 95 32 69 8 4 8 15°
AMS-101H 1-1/2" 95 40 60 8 5 8 15°
AMS-102 2" 105 52 86 12 6 8 15°
AMS-102H 2-1/2" 115 68 106 12 6 10 15°
AMS-103 3" 130 76 116 18 10 10 15°
AMS-104 4" 135 103 150 18 10 12 15°
AMS-105 5" 170 128 180 18 10 12 15°
AMS-106 6" 180 152 209 25 14 12 15°
AMS-108 8" 205 194 260 25 14 22 15°
AMS-110 10" 240 250 320 25 14 22 15°
AMS-112 12" 260 300 367 25 16 22 15°
AMS-114 14" 265 320 408 25 16 22 15°
AMS-116 16" 265 372 472 25 16 22 15°
AMS-118 18" 265 415 522 25 16 22 15°
AMS-120 20" 265 454 570 25 16 22 15°
AMS-124 24" 254 580 690 19 13 19 15°
AMS-128 28" 254 680 800 19 13 19 15°
　Allowable Movements
1.Axial Compression 2.Axial Elongation 3.Transverse Movement 4.Angular Deflection

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Hoi Luen Hardware Co. Ltd assumes no responsibility or liability for
typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

海聯五金有限公司 Tel: (+852) 23887282


Hoi Luen Hardware Co., Ltd E: [email protected] W: www.hoiluenhardware.com

You might also like