0% found this document useful (0 votes)
37 views1 page

Well Conditions For All Grades

The document provides a guide comparing Danum Wirelines products for different well conditions. It lists various wireline products and their suitability for wells with varying levels of hydrogen sulfide, carbon dioxide, and chlorides. The GD31MO and GD50N alloys have the highest resistance to stress corrosion cracking and acids across all concentrations of hydrogen sulfide, carbon dioxide, and chlorides. The document also provides information on alloy hardness, testing standards, and lengths and packaging of the wirelines.

Uploaded by

Refisal Bonnet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
37 views1 page

Well Conditions For All Grades

The document provides a guide comparing Danum Wirelines products for different well conditions. It lists various wireline products and their suitability for wells with varying levels of hydrogen sulfide, carbon dioxide, and chlorides. The GD31MO and GD50N alloys have the highest resistance to stress corrosion cracking and acids across all concentrations of hydrogen sulfide, carbon dioxide, and chlorides. The document also provides information on alloy hardness, testing standards, and lengths and packaging of the wirelines.

Uploaded by

Refisal Bonnet
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

DANUM WIRELINES: GENERAL INFORMATION

GUIDE TO COMPARISON OF PRODUCTS

PRODUCT WELL CONDITIONS P.R.E.*

API9A CARBON  MAY BE USED IN LOW H2S ( 2-3 ppm ) AND CO2 ( 2-3% ) -
WITH S1000 INHIBITOR.
 GOOD IN CHLORIDES BUT WIRE MUST BE WIPED
AFTER USE TO PREVENT PITTING
 EXTREMELY POOR IN H2S + CO2 + CHLORIDES

HEAVY DUTY  EXTREMELY POOR IN H2S + CO2 -


CARBON  GOOD IN CHLORIDES BUT WIRE MUST BE WIPED
AFTER USE TO PREVENT PITTING

GD304 / GD316 GENERAL PURPOSE USE, IN WELLS WITH LITTLE OR NO 19 / 26


CHLORIDES ( 304 NIL, 316 NOT MORE THAN 2/3% ). CAN
OPERATE IN HIGH CO2 CONCENTRATIONS.

GD31MO OUT STANDING RESISTANCE TO STRESS CORROSION 46


CRACKING IN ALL CONCENTRATIONS OF H2S CO2 AND
CHLORIDES

GD35MO AVAILABLE AS AN EQUAL TO USERS OF SANICRO 28 39

GD50N THE ULTIMATE IN WIRELINES DUE TO THE HIGH LEVELS OF 52


NICKEL, COBALT, CHROMIUM, MOLYBDENUM

* Pitting Resistance Equivalent (P.R.E.) = % Cr + 3.3 x % Mo + 30 x % N

ALLOY HARDNESS (ROCKWELL C) IS 46 EXCEPT 35MO TBA & 0.105”/108” GD304 = 48

STOCKS HELD AT VARIOUS LOCATIONS WORLDWIDE.

WIRELINES SUPPLIED WELD FREE, 100% NON DESTRUCTIVE TESTED


INDEPENDENT TESTED ACCORDING TO DIN 50049 3.1.b.

LENGTHS SUPPLIED IN MINIMUM OF 10,000FT MAXIMUM 35,000FT

PACKED ON STEEL REELS IN WOODEN CRATES/PALLETS

DANUM WELL SERVICES LTD - SALES & TECHNICAL OFFICE:


+ 44 1302 852248 [email protected]

or Michael EVANS – L’Auribelle Basse – Route de Caux – F 34120 Pézenas


Tel/Fax: +33 4.67.09.44.89 Mobile: +33 6.03.47.93.64 Email: [email protected]

You might also like