DUAL 4x4:4 INDOOR

BAND ACCESS POINT

ion8i

A Product by HFCL Group

 PRODUCT DESCRIPTION

IO carrier-grade Indoor Access Point is uniquely designed for high-performance, next-generation

networks based on 802.11ac Wave 2 technology with integrated 2.4 and 5 GHz 4x4:4 MU-MIMO
radios.

The Indoor Access Point provides throughput of up to 1733 Mbps on 5 GHz and up to 800 Mbps on
the 2.4 GHz band.

The Gigabit Ethernet port with 802.3at support allows powering the device with PoE switches.

It provides simultaneous data transmission to multiple devices, maximizes data throughput,

improves network efficiency as well as uplink and downlink performance.

It provides advanced location and indoor wayfinding, proximity-based push notification

capabilities as well as enables businesses to leverage mobility context to develop applications that
will deliver an enhanced user experience and increase the value of the wireless network for
organizations.

A Product by HFCL Group

TARGET APPLICATIONS

4X4:4 Indoor Access Point

ion8i

PoE Ethernet

PoE Switch

IP Cloud
2.4 GHz 5 GHz iCon8000
Wireless LAN
Controller

TECHNICAL SPECIFICATIONS
WIRELESS
Wi-Fi Standards Channel Size
802.11a/b/g/n/ac/ac Wave 2 20/40/80/80+80/160 MHz

Radio Mode Modulation Schemes

4x4 MU-MIMO with 4 spatial streams Supports upto 256 QAM

Radio Frequency Band User Support

Supported frequency bands with DFS optimization (country-specific 128 on 5 GHz and 64 on 2.4 GHz
restrictions apply):
- 2.4000 GHz to 2.4835 GHz
- 5.150 GHz to 5.250 GHz
- 5.250 GHz to 5.350 GHz PROCESSOR
- 5.470 GHz to 5.725 GHz
Qualcomm IPQ8065 SOC
- 5.725 GHz to 5.875 GHz

Peak Throughput
Upto 2.5 Gbps (1733 Mbps for 5 GHz and 800 Mbps for 2.4 GHz) POWER
+12V DC Power Adaptor
Maximum Transmit Power (per chain)
IEEE 802.3at PoE/PoE+
23 dBm for 2.4 GHz, 24 dBm for 5 GHz
(will depend on country-specific guidelines) Power Consumption (Max.): 20 W

Receiver Sensitivity
-97 dBm (for MCS 0)

A Product by HFCL Group

INTERFACES ENVIRONMENTAL
1 X 10/100/1000BASE-T Ethernet Operating Temperature
1 X Combo port (1 X 1000 Base X Optical Ethernet SFP -15ºC to 50º C
or 10/100/1000BASE-T Ethernet)
DC Power jack
PHYSICAL
Enclosure
ANTENNA Two-piece enclosure with ABS top and bottom body

Integrated Omni-directional Antennas Dimensions

Antenna gain: 4 dBi for 2.4 GHz, 4.5 dBi for 5 GHz 230 X 227.2 X 50.6 mm or 9.06 X 8.94 X 2 inches

Weight
SECURITY 0.65 kg
WPA-Personal, WPA2-Personal, WPA2-Enterprise,
EAP Type (EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, Mounting
Table top, wall and ceiling mounting
PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-AKA Prime, EAP-FAST),
Protected Management Frames Visual Indicators
VPN pass-through RF and Power LEDs
IP Security (IPSec), PPTP, IP-Filtering
Layer 2 Tunneling Protocol (L2TP/LWAP/CAPWAP/GRE)
Flexible guest access with device isolation CERTIFICATIONS
Captive portal and guest accounts
FCC Class B, CE
Rogue Access Point detection and prevention (WIDS & WIPS)
Hidden SSID in beacons Wi-Fi Certified Passpoint 2.0
MAC address authentication
X.509 digital certificates
SAFETY
Support for locally-significant certificates using
Public Key Infrastructure (PKI) Safety Protection as per IEC 60950 and IEC 60215
Electrostatic Discharge Immunity as per IEC 61000-4-2, Contact L2 and
Air Discharge, L3 Level
HIGH LEVEL FEATURES DC Surge Immunity as per IEC 61000-4-5, Level 2 (power port + signal
port)
WAN Protocols: Static IPv4/v6, DHCP client v4/v6
Electrical Fast Transient/Burst Immunity as per IEC 61000-4-4, Level 2
Band Steering
Radiated susceptibility as per IEC 61000-4-3 Level 2
Load Balancing
Conducted Susceptibility as per IEC 61000-4-6, Level 2
Channel Bonding
Bump and vibration as per QM333
WDS and MESH Support
Auto Channel Selection
Intelligent RF control plane for self-healing and self-optimization OTHER COMPLIANCES
Ability to simultaneously serve clients and monitor RF environment
Radiated Emission as per CISPR 22 Class B
Radio Resource Management for power and channel
Conducted Emission as per CISPR 22 Class B (power port + signal port)
Management: Standalone (via mobile app or GUI) or through
appliance-based WLC and EMS or cloud-based Voltage Variation: AC- as per IEC 61000-4-11 and DC- as per
16 SSID per Radio IEC 61000-4-29
QOS 802.11e WMM
802.11r- fast roaming and fast handover
Bandwidth Shaping per SSID
Maximal ratio combining (MRC) and beamforming support
802.11w- Protected Management Frames (PMF) support
Advance Power Save (U-APSD)
VoIP support

ORDERING INFORMATION
MODEL NO. PRODUCT DESCRIPTION
Email: [email protected]
Website: www.hfcl.com
ion8i Dual band 4x4:4 Indoor Access Point with mounting bracket (Integrated Antenna)
www.ionetworks.in
8, Commercial Complex, Masjid Moth
Greater Kailash-II, New Delhi-110048

A Product by HFCL Group