Scribd
Upload
715 views2 pages

Car Power Amplifier Circuit Using C5100

This document provides details on a car power amplifier circuit using the C5100 and A1908 output transistors. The circuit is simple to build, compact, and relatively inexpensive. It can provide about 400W RMS of power at 8 ohms from a 32V DC asymmetric power supply. A list of required parts is included, along with a note that the circuit lacks short circuit protection so the amplifier could be destroyed by an output short circuit.

Uploaded by

Mechín Rodriguez Ejvr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
715 views2 pages

Car Power Amplifier Circuit Using C5100

This document provides details on a car power amplifier circuit using the C5100 and A1908 output transistors. The circuit is simple to build, compact, and relatively inexpensive. It can provide about 400W RMS of power at 8 ohms from a 32V DC asymmetric power supply. A list of required parts is included, along with a note that the circuit lacks short circuit protection so the amplifier could be destroyed by an output short circuit.

Uploaded by

Mechín Rodriguez Ejvr
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Car power amplifier circuit using C5100 / A1908

Publisher Elcircuit

Car amplifier is not very common as a project, because it is usually difficult to build,
and expensive. A small error during assembly will result in power amps are not
functioning properly. I suggest that you use the PCB for this amplifier. Even so, this
circuit is simple to build, compact, relatively inexpensive, and provide a level of
performance that will satisfy most of the needs of your car audio.

Car power amplifier circuit using Output Transistor C5100 / A1908. Power Output
About 400W RMS at 8 Ohm. Power Supply need 32V DC Asymmetric, For car
application you can adding inverter 12VDC symmetic to 32VDC asymmetric.

Part List :
Resistor's
R1,R3,R5,R6,R7,R9____1K Ohm 1/2 W
R20,R23_____________10 Ohm 1W
R8,R12______________22KOhm 1/2W
R10,R11_____________3k3 Ohm 1/2W
R13,R14_____________220 Ohm 1W
R16,R17_____________3,3 Ohm 1W
R18,R19_____________0,33 Ohm 5W
Capacitor's
C1__________________1uF / 50V
C2__________________220pF
C3,C6________________100pF
C4,C5,C12,C13________100uF/50V
C7,C8,C9_____________100nF
Transistor's
Q1,Q2,Q3_____________ C828
Q4___________________ MJE350
Q5___________________ 2SC3421
Q6___________________ 2SA1358
Q7___________________ C5100
Q8___________________ A1908

Note :There is NO SHORT CIRCUIT PROTECTION on amplifier circuit. The amp is


designed to be used within a subwoofer or other speaker enclosure, so this power
amp is matched for car subwoofer amplifier. A short circuit on the output signal will
destroy the amplifier.The power dissipated is such that great care is needed with
transistor mounting and cooler.

You might also like