DESIGN DATA SYSTEM RESERVOIR COIL

DESIGN PRESSURE 1500 PSI N/A N/A

DESIGN TEMPERATURE (MAX) 212 °F N/A N/A
7 10 DESIGN TEMPERATURE (MIN) -20 °F N/A N/A
AMBIENT TEMPERATURE (MAX) N/A N/A N/A
9
AMBIENT TEMPERATURE (MIN) N/A N/A N/A
CORROSION ALLOWANCE N/A N/A N/A

MATERIALS OF CONSTRUCTION

8
316 SS
11
2 12

COMPONENTS
5 REF QTY DESCRIPTION WETTED MAT. GPN SPARE
1* 1 TUBE STAND: 4" x 3" x .188" W x 72" LG CS/PAINTED L34-07241-RG002
2 1 ACCUMULATOR: 10 GAL. BUNA BLADDER 2" NPT CS LMS-0AC1-010
3 1 HAND PUMP KIT: 316 SS LKT-FIL0-SS1
11 12 4 1 RE-1603 1 GAL RESERVOIR ASSY 316 SS LMLF-55398-001
J C 5 1 HEAT EXCHANGER: W/ 3/4" x 0.095" WALL x 30' LG COIL CS/PAINTED MHXR-207362-001
4 9 10
TI 6 1 MANIFOLD BLOCK: 2 x 2 x 6 WITH 4 x 1/2 NPT AND 2 x 3/4 NPT HOLES SA-479 316L LBD-MN53B-701
H F 7 1 TRANSMITTER: PRESSURE W/ MANIFOLD 316 WT'D LPT-800P7-R010
7 8 1 BLOCK/BLEED VALVE: 1/2" NPT W/TEFLON 316 SS LVI-20092-001
4 A
9 1 PRESSURE GAUGE: 4 1/2" DIAL 0-1500 PSI 1/2" NPT 316 SS LPI-1K56-101N0
PI PIT E 10 1 GATE VALVE: 3/4" SW CLASS 800 316L SS LVG-6SS7-M0T00
5
11 1 THERMOWELL: 3/4" MNPT x 1/2" FNPT U=1.625 316 SS LTW-46N6-001
13 17 13
15 12 1 TEMPERATURE GAUGE: 5" DIAL 0-250° F/120 C 1/2 NPT U=2.5 316 SS LTI-2506-E54
G
8 13 1 GATE VALVE: 1/2" SW CLASS 800 NACE CS LVG-4SS1-M0T00
14 1 GATE VALVE: 1/2" SW CLASS 800 NACE 316L SS LVG-4SS7-M0T00
15 1 CHECK VALVE: 1/2" SW 316 SS LVI-4CK6-C15
16 1 STRAINER: Y-TYPE 1/2" NPT 100 MESH 316 SS LFE-4Y0H6-W00
3 3 16 14
17 1 BALL VALVE: 3/8 COMP. FTG. 316 SS LVB-3TT6-M05
D B

TERMINATIONS AND CONNECTIONS

17
REF QTY SERVICE SIZE TYPE AND RATING
A 1 BARRIER FLUID SUPPLY TO SEAL 3/4" 900# RFSW
B 1 BARRIER FLUID RETURN FROM SEAL 3/4" 900# RFSW
C 1 VENT 3/4" 900# RFSW
D 1 DRAIN 1/2" 900# RFSW
E 1 COOLING WATER IN 1" NPT
F 1 COOLING WATER OUT 1" NPT
G 1 COOLING WATER DRAIN 1/2" 150# RFSW
H 1 FILL CONNECTION 3/4" NPT
J 1 N2 CHARGER ADAPTOR N/A N/A

DESCRIPTION
PROJECT PER P.O. PLAN 53B 5 GALLON ACCUMULATOR
CUSTOMER PER P.O. WATER HEAT EXCHANGER
TOLERANCES (UNLESS OTHERWISE STATED) - (in) ENGINEERING PER P.O.
FRACTIONS ±1/4" 2 OJ OJ OJ REVISED PER CUSTOMER COMMENTS
X.X ±.05" 23 APR 2018 END USER PER P.O. CONFIGURATION GPN / CODE DRG. LOC. DESIGN AUTH. SCALE
X.XX ±.01" 1 OJ OJ OJ REVISED PER CUSTOMER COMMENTS 21 MAR 2018 LOCATION PER P.O. MEXICO
0 OJ OJ OJ ISSUE FOR APPROVAL PLAN 53B NONE
X.XXX ±.005" 15 FEB 2018 JC REF. No.
THIRD ANGLE PROJECTION ANGULAR ±1° REV PREP'D CHK'D APPR'D DESCRIPTION DATE DRAWING No. ISSUE
Seal Support
All intellectual property rights (including but not limited to copyright and design rights whether registered or unregistered) in relation to this drawing together with the information contained in this drawing (including but not limited to know-how and confidential information) is proprietary to John Crane. Reproduction (whether in whole or in part)
System GA-210874 2
or use in any way whatsoever of this drawing or of any information contained therein is prohibited except with the prior written consent of John Crane. All rights in relation to this drawing are reserved. 1 of 2
 254 REFERENCE CODES & STANDARDS
10

508
DESIGN PER ASME CODE SECTION VIII DIV.1
F E 20
86 67
3 3/8 2 5/8 457 25
18 1
TYP

PO
CO CI
254 305
10 12
PI INSPECTION AND TESTING
767
30 1/4
22
1. INSPECTION AND TESTING PER JOHN CRANE FLUID CONTROL GROUP STANDARD
O 7/8 25 UNLESS OTHERWISE NOTED.
4 PLCS
BASE PLATE DETAIL 1
TYP

1260 SURFACE FINISH

49 5/8 430
16 7/8 CS PAINT SHALL COMPLY WITH NRF-053-PEMEX
C
223 254
8 3/4 10
SYSTEM WEIGHTS AND VOLUMES
ESTIMATED DRY WEIGHT (FOR ACTUAL UNIT WEIGHT REFER TO UNIT TAG) 660 lbs
WET WEIGHT (Nominal) N/A lbs
J RESERVOIR NOMINAL VOLUME N/A Gal
OPERATING VOLUME AT NORMAL LEVEL N/A Gal
B ACCUMULATOR NOMINAL VOLUME 10 Gal
INSTRUMENTS ELECTRICAL CLASSIFICATION
A
Class I Div. 2 Grp.D

6
NOTES:
1. ALL DIMENSIONS ARE IN MILLIMETERS .
2. ALL DIMENSIONS IN [ ] ARE IN INCHES.
H 3. ALL DIMENSIONS IN ( ) ARE REFERENCE DIMENSIONS.
2148 4. WETTED PARTS COMPLY WITH NACE MR 0103
84 5/8
1845
72 5/8

1684
66 1/4

G
( 9246
5/8 ) 15
14

519 16
20 1/2

( 152
6 )
D ( 5145
3/4 )
DESCRIPTION
305 508 25 PLAN 53B 5 GALLON ACCUMULATOR
12 20 1 25 WATER HEAT EXCHANGER
1

CONFIGURATION GPN / CODE DRG. LOC. DESIGN AUTH. SCALE

PLAN 53B MEXICO NONE
DRAWING No. ISSUE
Seal Support
All intellectual property rights (including but not limited to copyright and design rights whether registered or unregistered) in relation to this drawing together with the information contained in this drawing (including but not limited to know-how and confidential information) is proprietary to John Crane. Reproduction (whether in whole or in part)
System GA-210874 2
or use in any way whatsoever of this drawing or of any information contained therein is prohibited except with the prior written consent of John Crane. All rights in relation to this drawing are reserved. 2 of 2