Scribd
Upload
199 views2 pages

Elevator Check List: Control

The document provides a checklist for inspecting different components of an elevator system. It lists tasks for inspecting the interior car, machine room, top of the car, and pit. The inspection tasks include examining for damage, checking indicator lights and buttons, lubricating parts, and ensuring proper functioning of safety devices and switches. The overall purpose is to inspect the condition and performance of the elevator.

Uploaded by

ENG.Tahir Thamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
199 views2 pages

Elevator Check List: Control

The document provides a checklist for inspecting different components of an elevator system. It lists tasks for inspecting the interior car, machine room, top of the car, and pit. The inspection tasks include examining for damage, checking indicator lights and buttons, lubricating parts, and ensuring proper functioning of safety devices and switches. The overall purpose is to inspect the condition and performance of the elevator.

Uploaded by

ENG.Tahir Thamer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CoNTRoL

ELECTRICAL AND
ELECTRONICS SERVICES

DATE: Supervisor:
Elevator check list
LOCATION: Sign:
Inside the Car:

• Examine the interior of the elevator car for damage to the walls, ceiling, and handrails.

• Examine the position indicator lights and replace any burned out lights.

• Operate the elevator going up and down and check the levelling accuracy, acceleration,

and deceleration. Make any adjustments deemed necessary.

• Check to make sure that the door moves smoothly and does not slam or bounce.

• Make sure the door restrictor operates properly and make any necessary repairs.

Machine Room:

• Make sure the machine room does not contain any material unrelated to the

elevator.

• Check components for leaks, unusual vibration, or wear.

• Inspect electrical components for evidence of overheating or failure.

• Lubricate components, if necessary.

• Check the oil level.

• Make any necessary adjustments or schedule follow-up service.

BAGHDAD – KARADAH
Mobile: 07833048484
Email: [email protected]
Facebook: @controlgy
CoNTRoL
ELECTRICAL AND
ELECTRONICS SERVICES

Top of Car:

• Check that the stop switch and inspection station function properly.

• Remove any debris from the top of the car.

• Inspect any visible components, including rollers, guide rails, and leveling

devices.

• Check the traveling cables for wear and inspect connections.

• Inspect the door operator and its components.

Pit:

• Make sure that the stop switch, lights, and GFI outlet function properly.

• Clean the pit and check for signs of leaks.

• Inspect the spring buffers for signs of corrosion, alignment, and secure

attachment.

• Inspect all visible components, including rollers, guide rails, safeties, and

switches.

• Check the travel cable for wear, pinches, and snags.

• Make sure the sump pump is clean and operating correctly.

BAGHDAD – KARADAH
Mobile: 07833048484
Email: [email protected]
Facebook: @controlgy

You might also like