Scribd
Upload
83 views

System Event Printer

Uploaded by

mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views

System Event Printer

Uploaded by

mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

EST Catalog u Annunciation

System Event
Printer S3424

PT-1S, PT-1P 7165-1657:


0173

COA 6086
COA 6087

Overview Standard Features


The PT-1 series printers are high speed, 9-pin dot matrix type • High speed, bi-directional printing
which use standard, continuous tractor feed computer paper. The
• Serial (model PT-1S) or parallel (model PT-1P) interface
PT-1 series printers are used to permanently record Life Safety
System changes of state. All printed entries contain the date, time, • Front panel setup
event type and a user defined message for each printed event. • LED Status indicators
The printer is required in proprietary type systems. In local, auxilia-
ry or remote station systems the printer is ancillary and is optional. • RS-232/USB, Parallel/USB versions
The printer must be backed up by a UPS in a proprietary system. • Printer self-test mode
Printer paper may be fed from the rear or bottom of the printer.

Application
The PT-1S (serial/USB interface) is used adding print capability to
fire control panels that support serial or USB printer interfaces. The
PT-1P (Parallel/USB interface) is typically used when the printer is
connected a computer graphical user interface.

Installation
The printer is configurable through simple dip switches to support
proper operation with the system. Connecting a serial/USB printer
may cause a ground fault on some control panels. If this happens,
an IOP3-A isolator module may be installed between the printer
and the control panel.

Page 1 of 2 D ATA S H E E T 270020


Not to be used for installation purposes. Issue 5
Engineering Specifications
The event and status printer shall be a 9-pin, impact, dot matrix printer with a minimum
print speed of 232 characters per second. Print parameters shall be set up with a menu
drive program in the printer. The printer shall be capable of USB, serial or parallel commu-
Contact us...
nications protocol. The communications speed for RS-232 communications protocol shall
Email: [email protected]
be adjustable from 300 to 9600 Baud. The serial or parallel cable shall be supervised. The
Web: www.est-fire.com printer shall list the time, date, type and user defined message for each event printed.
EST is an EDWARDS brand.
1016 Corporate Park Drive
Mebane, NC 27302 Connection Diagram
In Canada, contact Chubb Edwards...
Email: [email protected]
Web: www.chubbedwards.com

© 2013 UTC Fire & Security Americas


Corporation, Inc. All rights reserved.
Specifications subject to change
without notice. Edwards is part of UTC
Climate, Controls & Security, a unit of
United Technologies Corporation.

Specifications
Print Speed 232 cps
Voltage 120 Vac versions and 220 to 240 Vac versions
Power rating 48VA
Frequency 50/60 Hz
MTBF 4000 Hrs @ 25% duty cycle
Size 14.65 x 10.83 x 3.15 inches (37.2 x 27.5 x 8.0 cm)
Weight 9.9 lbs (4.5 kg)
Agency Listings UL, ULC, MEA, CSFM
Temperature: 32° - 120°F (0° - 49°C).
Operating Environment
Relative Humidity: 0 to 93% non-condensing

Ordering Information
Model Description
PT-1S Serial Printer
PT-1P Parallel Printer
PT-1S/220 Serial Printer-220/240 Vac
PT-1P/220 Parallel Printer-220/240 Vac

Related Parts Ordering Information


IOP3A Isolated I/O port card
12-17-13

Page 2 of 2 D ATA S H E E T 270020


Not to be used for installation purposes. Issue 5

You might also like