Scribd
Upload
16 views

INDEX

The document outlines the key components and processes involved in oil and gas drilling, including rig components, well planning, drill string design, drilling hydraulics, drilling fluids, cementing, directional drilling, and well control.

Uploaded by

SHOBHIT KUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
16 views

INDEX

The document outlines the key components and processes involved in oil and gas drilling, including rig components, well planning, drill string design, drilling hydraulics, drilling fluids, cementing, directional drilling, and well control.

Uploaded by

SHOBHIT KUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

INDEX

1. Introduction to Rig Components


1.1. Hoisting system
1.2. Rotary system
1.3. Circulating
1.4. Well control equipment’s

2. Well Planning
2.1. Offset Study
2.2. Geological Prognosis
2.3. Mud Weight Selection
2.4. Casing Selection
2.5. Kick tolerance
2.6. Casing Design

3. Drill String Design


3.1. BHA selection and design
3.2. Bit Selection and design
3.3. BHA components and their Properties
3.4. Drill string care and inspection
3.5. Drill string failure and prevention
3.6. Drill string vibration

4. Drilling Hydraulics
4.1. Bit Hydraulics
4.2. Nozzle selection
4.3. Pressure losses
4.4. ECD calculations
4.5. Swab/surge calculations
4.6. Flow velocities

5. Drilling Fluids
5.1. Introduction to drilling mud
5.2. Drilling Fluids type and function
5.3. Mud rheology Selection
6. Cementing
6.1. Types of cementing
6.2. Cement slurry Design
6.3. Cementing calculations

7. Directional Drilling
7.1. Basics of directional drilling

8. Well Control
8.1. Introduction to Well control
8.2. Types of well control
8.3. BOP schematic
8.4. Different types of Shut in procedures
8.5. Kill sheets

You might also like