BMS numbers with description:

Use Ctrl+F to search this page.

BMS1-2 SYNTHETIC RUBBER; GENERAL PURPOSE, WEATHER RESISTANT

BMS1-3 SYNTHETIC RUBBER CORK
BMS1-4 AROMATIC FUEL RESISTANT FLEXIBLE FITTING ASSEMBLIES
BMS1-6 MOUNTING; SYNTHETIC RUBBER
BMS1-7 CONTROL CABLE AIR SEALS
BMS1-8 HOSE: FLEXIBLE COOLING AIR
BMS1-9 RUBBER, SPONGE (CLOSED CELL)
BMS1-10 SYNTHETIC RUBBER, HOT OIL RESISTANT
BMS1-11 WEATHER, LOW TEMPERATURE RESISTANT POLYCHLOROPRENE RUBBER
BMS1-12 FLAT GASKET MATERIALS FOR AIRCARFT APPLICATIONS
BMS1-13 FABRIC INSERTED AIR SEAL DIAPHRAGM MATERIAL
BMS1-14 SYNTHETIC RUBBER - LOW TEMPERATURE
BMS1-15 CELLULAR RUBBER
BMS1-17 FABRIC, SILICONE RUBBER COATED
BMS1-18 SYNTHETIC RUBBER, GENERAL PURPOSE SILICONE
BMS1-19 SYNTHETIC RUBBER - HIGH TEMPERATURE
BMS1-20 SYNTHETIC RUBBER, FLAME RESISTANT SILICONE
BMS1-22 SYNTHETIC RUBBER, LOW TEMPERATURE TEAR RESISTANT SILICONE
BMS1-23 SILICONE SPONGE RUBBER, CLOSED CELL
BMS1-24 SYNTHETIC RUBBER; OIL, WEATHER AND FLAME RESISTANT
BMS1-25 AIR SEAL MATERIAL, DIAPHRAGM TYPE
BMS1-26 SYNTHETIC RUBBER, LOW TEMPERATURE FUEL AND WEATHER RESISTANT
BMS1-27 SYNTHETIC RUBBER, WEATHER AND HYDRAULIC FLUID RESISTANT
BMS1-28 RUBBER, AIR SEAL MATERIAL 20 DUROMETER
BMS1-29 RUBBER, SYNTHETIC, CABLE SEAL MATERIAL
BMS1-30 INSULATION, PIPE & TUBING, LOW TEMPERATURE, FLEXIBLE
BMS1-31 RUBBER, MECHANICAL FORMING
BMS1-32 SYNTHETIC RUBBER, TEAR RESISTANT, 70 DUROMETER
BMS1-33 SYNTHETIC RUBBER, WEATHER AND SKYDROL 500 RESISTANT
BMS1-34 SYNTHETIC RUBBER, TEAR RESISTANT, LOW AND HIGH TEMPERATURE RESISTANT, SILICONE
BMS1-35 FABRIC REINFORCED DIAPHRAGM MATERIAL
BMS1-36 SYNTHETIC RUBBER, SKYDROL RESISTANT LOW AND HIGH TEMPERATURE SILICONE
BMS1-37 SYNTHETIC RUBBER, BUTYL LOW REBOUND
BMS1-38 RUBBER, SYNTHETIC, FLAME RESISTANT FOR ABLATION APPLICATIONS
BMS1-39 ELECTRICAL CABLE JACKETING MATERIAL, POLYCHLOROPRENE
BMS1-40 SYNTHETIC RUBBER, UNCURED, LOW AIR PERMEABILITY
BMS1-41 HEAT SHRINKABLE MOLDED AND EXTRUDED MATERIAL
BMS1-43 SYNTHETIC RUBBER, FUEL RESISTANT, LOW AND HIGH TEMPERATURE FLUROSILICONE
BMS1-44 SYNTHETIC RUBBER, UNCURED, TYGUM MATERIAL
BMS1-45 SYNTHETIC RUBBER, HIGH STRENGTH SILICONE
BMS1-46 SYNTHETIC RUBBER, HIGH STRENGTH TEAR RESISTANT, SILICONE, FOR ABLATIVE AND INSULATIVE APPLICATIONS
BMS1-47 MARKING PATCH SHEET, NEOPRENE ELECTRIC CABLE
BMS1-50 SYNTHETIC RUBBER WEATHER, OZONE AND BMS3-11 RESISTANT
BMS1-51 CLOSED CELL SYNTHETIC CELLULAR RUBBER, OZONE AND BMS3-11 RESISTANT
BMS1-52 SYNTHETIC RUBBER, HIGH PERFORMANCE SILICONE
BMS1-53 SYNTHETIC RUBBER, FUEL RESISTANT FLUOROSILICONE
BMS1-54 ELASTOMER, SYNTHETIC FOR ELEVATED TEMPERATURE SERVICE
BMS1-57 SILICONE RUBBER, BMS3-11 RESISTANT, HIGH PHYSICAL PROPERTIES
BMS1-58 SLEEVING, SPLIT MECHANICAL CLOSURE
BMS1-59 SILICONE RUBBER, SELF EXTINGUISHING
BMS1-60 SPECIALTY TYPE SPONGE RUBBER, CLOSED CELL
BMS1-61 MICROWAVE ABSORBING MATERIAL
BMS1-62 SILICONE RUBBER, HIGH PERFORMANCE, HIGH MODULUS
BMS1-63 SILICONE RUBBER, SELF EXTINGUISHING, FOR AIRCRAFT INTERIORS
BMS1-68 MODIFIED CLOSED CELL SILICONE FOAM RUBBER, FIRE RETARDANT, LOW COMPRESSION SET, PHOSPHATE ESTER RESISTANT
BMS1-69 SELF-EXTINGUIHING-LOW COMPRESSION SET SILCONE SPONGE RUBBER
BMS1-70 SILICONE ELASTOMERIC MATERIAL, VACUUM STABLE
BMS1-71 ELASTOMER, SYNTHETIC FOR PASSENGER WINDOW SEALS
BMS1-72 SILICONE RUBBER, FIRE RETARDANT, FOR AIRCRAFT INTERIORS
BMS2-2 SPRUCE (SITKA), INDUSTRIAL CLEAR
BMS3-2 CLEANING SOLVENT, GENERAL PURPOSE
BMS3-3 BONDED SOLID FILM DRY LUBRICANTS
BMS3-4 FLUID, HIGH TEMPERATURE HYDRAULIC (MLO 7277 MODIFICATION I TYPE)
BMS3-6 SPECIAL SLIP CLUTCH ASSEMBLY LUBRICANT
BMS3-7 LUBRICATING OIL, AIRCRAFT AIR COMPRESSORS
BMS3-8 SOLID FILM LUBRICANT, LIQUID DISPERSED
BMS3-9 CONDUCTIVE LUBRICANTS
BMS3-11 HYDRAULIC FLUID, FIRE RESISTANT
BMS3-14 GREASE, HIGH TEMPERATURE
BMS3-18 LUBRICANT, SOLID FILM, FOR HIGH TEMPERATURE FASTENERS AND THREADED PARTS
BMS3-19 SOLID LUBRICANT COMPACT BEARING MATERIALS
BMS3-22 HIGH TEMPERATURE LUBRICANT
BMS3-23 ORGANIC CORROSION INHIBITING COMPOUND
BMS3-24 GREASE, AIRCRAFT: BALL AND ROLLER BEARING, WIDE TEMPERATURE RANGE
BMS3-25 LUBRICANTS, VACUUM STABLE
BMS3-26 ORGANIC CORROSION INHIBITING COMPOUNDS, HEAVY DUTY
BMS3-27 CORROSION INHIBITING MATERIAL, NONDRYING RESIN MIX
BMS3-28 ANTI-SEIZE COMPOUND, GENERAL PURPOSE
BMS3-29 ADVANCED ORGANIC CORROSION INHIBITING COMPOUNDS
BMS3-32 LANDING GEAR SHOCK STRUT FLUID, ANTI-WEAR
BMS3-33 GREASE, AIRCRAFT, GENERAL PURPOSE
BMS3-34 GREASE, MAINTENANCE-FREE, ROLLING ELEMENT BEARING, AIRCRAFT
BMS3-35 HEAVY DUTY CORROSION INHIBITING COMPOUNDS
BMS3-38 CORROSION INHIBITING MATERIAL, NON-DRYING PASTE
BMS3-39 SELF-LUBRICATING LINER
BMS4-1 ALUMINUM-BALSA SANDWICH PANELS
BMS4-2 HONEYCOMB CORE SANDWICH
BMS4-3 SPECIFICATION FOR ALUMINUM- HONEYCOMB ALUMINUM FACED SANDWICH MATERIAL
BMS4-4 HONEYCOMB CORE 5052 AQLUMINUM ALLOY
BMS4-5 HONEYCOMB CORE 3003 ALUMINUM ALLOY
BMS4-6 FLEXIBLE 5052 ALUMINUM ALLOY CORE
BMS4-7 ALUMINUM-HONEYCOMB-ALUMINUM FACED SANDWICH MATERIAL
BMS4-8 PAPER HONEYCOMB CORE
BMS4-10 SANDWICH PANELS END GRAIN BALSA CORE
BMS4-12 WELDED TITANIUM HONEYCOMB CORE
BMS4-13 SANDWICH PANELS POLYVINYL CHLORIDE FOAM CORE
BMS4-15 WELDED NICKEL ALLOY HONEYCOMB CORE
BMS4-17 UNIDIRECTIONAL FIBERGLASS FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK
BMS4-20 UNIDIRECTIONAL AND WOVEN GRAPHITE AND GLASS CLOTH FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK
BMS4-23 UNIDIRECTIONAL FIBERGLASS FACED ALUMINUM HONEYCOMB CORE FLOOR PANEL STOCK
BMS4-25 HONEYCOMB CORE 5056 ALUMINUM ALLOY
BMS5-1 SEALING PUTTY
BMS5-1-1 RUBBER, AIR SEAL MATERIAL, 20 DUROMETER
BMS5-6 POST ASSEMBLY PRESSURE SEALANT
BMS5-7 ADHESIVE, NEOPRENE BASE
BMS5-8 SMOOTHING AND FILLING COMPOUNDS
BMS5-10 ROOM TEMPERATURE CURING EPOXY ADHESIVE SYSTEM
BMS5-10-1 CHEMICALLY MILLED STEEL
BMS5-11 FILLETING STYLE FUEL TANK SEALANT
BMS5-12 FUEL PRESSURE AND MOISTURE SEALANTS
BMS5-13 AERODYNAMIC SMOOTHER
BMS5-14 ADHESIVE - SYNTHETIC RUBBER, BUNA-N
BMS5-15 STRUCTURAL ADHESIVES FOR METAL TO METAL ASSEMBLIES- METALBOND 303 SYSTEM
BMS5-16 TWO PART HOLE FILLING COMPOUND
BMS5-17 METAL TO METAL STRUCTURAL ADHESIVES FOR ELEVATED TEMPERATURE SERVICE
BMS5-18 HIGH TEMPERATURE SEALANTS
BMS5-19 PRESSURE, WEATHER AND FUEL CAVITY SEALANT
BMS5-20 STRUCTURAL ADHESIVES FOR METAL TO METAL SANDWICH ASSEMBLIES- NARMTAPE 102 SYSTEM
BMS5-22 FIREWALL SEALANT
BMS5-24 NONSLIP AIRCRAFT WALKWAY COATING
BMS5-25 EPOXY-AMINE ADHESIVE FOR NON-STRUCTURAL BONDING
BMS5-26 INTEGRAL FUEL TANK SEALANT
BMS5-27 DECAL ADHESIVE
BMS5-28 HONEYCOMB EDGE FILLING AND POTTING COMPOUND
BMS5-29 ADHESIVE: EPOXY POLYAMIDE, 4 COMPONENT
BMS5-30 CEMENT - LOW ODOR, SYNTHETIC RUBBER
BMS5-31 ADHESIVES FOR MYLAR AND NYLON
BMS5-32 PRESSURE AND WEATHER SEALANT, LOW DENSITY
BMS5-33 HIGH TEMPERATURE SEALANT
BMS5-34 ADHESIVE, FLEXIBLE EPOXY, FOR NON-STRUCTURAL BONDING
BMS5-35 ELECTRICALLY CONDUCTIVE SEALANTS
BMS5-36 CYANOACRYLATE ADHESIVE FOR NONSTRUCTURAL BONDING
BMS5-37 COATING COMPOUND ELECTRICAL INSULATING
BMS5-38 ELEVATED TEMPERATURE AERODYNAMIC SMOOTHER
BMS5-39 CLEANINESS SEALANT
BMS5-40 STRUCTURAL ADHESIVES FOR METAL-TO-METAL SANDWICH ASSEMBLIES BLOOMINGDALE FM-58 SYSTEM
BMS5-41 PRESSURE, WEATHER AND FUEL CELL CAVITY SEALTANT, B-52G
BMS5-42 STRUCTURAL ADHESIVE FOR METAL-TO-METAL ASSEMBLIES - 350 F CURE
BMS5-43 CEMENT-GENERAL PURPOSE-NITROCELLULOSE BASE
BMS5-44 TEMPERATURE-RESISTANT, FUEL, PRESSURE, AND WEATHER SEALANT
BMS5-45 FUEL TANK SEALANT
BMS5-47 BRAZE ALLOY SUSPENDING AGENTS AND BINDERS
BMS5-49 STRUCTURAL ADHESIVES FOR METAL-TO-METAL ASSEMBLIES- AEROBOND 3013 SYSTEM
BMS5-51 MODERATE TEMPERATURE CURING STRUCTURAL ADHESIVE SYSTEM
BMS5-52 NON-ADHERING BONDING VERIFICATION FILM
BMS5-54 SEALANT, SILICONE, EXTRUDABLE LOW DUROMETER
BMS5-55 CEMENT-SYNTHETIC RUBBER - NAPHTHA SOLUBLE
BMS5-56 CEMENT - SYNTHETIC RUBBER WATER DISPERSED
BMS5-57 ADHESIVE-SILICONE PRESSURE SENSITIVE
BMS5-58 CEMENT - SILICONE - ROOM TEMPERATURE VULCANIZING
BMS5-59 CEMENT-SILICONE-THERMOSETTING
BMS5-60 QUICK SETTING EPOXY ADHESIVE FOR NON-STRUCTURAL BONDING
BMS5-61 ENVIRONMENTAL SEALANT
BMS5-62 RUBBER, SYNTHETIC, MASTIC FOR ABLATIVE AND INSULATIVE APPLICATIONS
BMS5-63 FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT
BMS5-69 LAMINATED ALUMINUM SHEETS - STRUCTURALLY BONDED
BMS5-70 STRUCTURAL ADHESIVES FOR METAL-TO-SANDWICH ASSEMBLIES FM-61 SYSTEM
BMS5-71 STRUCTURAL ADHESIVES FOR METAL-TO- METAL SANDWICH ASSEMBLIES AF 204 SYSTEM
BMS5-72 INSULATION ADHESIVE FOR ELECTRONIC ASSEMBLY
BMS5-79 PRESSURE AND ENVIRONMENTAL SEALANT
BMS5-80 STRUCTURAL ADHESIVE SYSTEM FOR MODERATE TEMPERATURE CURE
BMS5-81 SEALANT, SECONDARY FUEL BARRIER
BMS5-84 POLYIMIDE PASTE ADHESIVES
BMS5-89 CORROSION INHIBITING ADHESIVE PRIMER
BMS5-90 FOAMING ADHESIVES
BMS5-91 PRESSURE SENSITIVE FILM ADHESIVE FOR INTERIOR NONSTRUCTURAL BONDING
BMS5-92 ADHESIVE, MODIFIED EPOXY FOR GENERAL PURPOSE USE
BMS5-93 LOW DENSITY POLYURETHANE SEALANT
BMS5-94 ONE-PART ADHESIVE FOR SUSTAINED EXPOSURE TO 250F
BMS5-95 PRESSURE AND ENVIRONMENTAL SEALANT-CHROMATE TYPE
BMS5-101 STRUCTURAL ADHESIVES FOR 180 F SERVICE APPLICATIONS
BMS5-102 FAST CURE THIXOTROPIC EPOXY ADHESIVE
BMS5-104 STRUCTURAL ADHESIVE FOR 350 F SERVICE APPLICATIONS
BMS5-105 URETHANE ADHESIVE FOR BONDING
BMS5-106 ADHESIVE-FLOOR PANEL BONDING
BMS5-107 ADHESIVE - FLOOR PANEL INSERT BONDING
BMS5-108 FLEXIBLE SEALING COATINGS
BMS5-109 ROOM TEMPERATURE CURING TWO PART EPOXY ADHESIVES
BMS5-113 ADHESIVE, NONSTRUCTURAL, TWO PART LIQUID, FOR INTERIOR APPLICATION TO 200F
BMS5-114 PLASTIC FILM, HIGH TEMPERATURE RESISTANT, UNSUPPORTED
BMS5-115 PLASTIC FILM, HIGH TEMPERATURE RESISTANT, LOW FLOW, UNSUPPORTED, FOR USE AS A HONEYCOMB SEPTUM MATERIAL
BMS5-121 POSITIONING FABRIC FOR STRUCTURAL ADHESIVES APPLICATION
BMS5-122 ADHESIVE, INSULATION, SELF- EXTINGUISHING, NONCRAZING
BMS5-123 FAST-SETTING EPOXY ADHESIVE
BMS5-125 COMPOUND, SELF-LEVELING, FOR FLUID DRAINAGE
BMS5-126 ADHESIVE: EPOXY POLYAMIDE, 2 COMPONENT
BMS5-127 ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS AND CORE SPLICING FOR EXTERIOR PARTS
BMS5-128 ADHESIVE, LOW OUTGASSING, LOW VISCOSITY, ROOM TEMPERATURE CURE
BMS5-129 STRUCTURAL ADHESIVES FOR COMPOSITE APPLICATION -250 F CURE
BMS5-133 CARPET TAPES
BMS5-136 SURFACE FILLERS FOR INTERIOR APPLICATIONS
BMS5-137 STRUCTURAL ADHESIVE FOR ACOUSTIC PANELS - 350 F SERVICE
BMS5-138 CARBON FILLED SEALANT
BMS5-139 IDENTIFICATION TAPES, TRANSPARENT OVERCOATINGS USED FOR PRINTED WIRING ASSEMBLIES
BMS5-141 ADHESIVE, ROOM TEMPERATURE CURE, HIGH TEMPERATURE RESISTANT MODERATE PEEL STRENGTH, LOW OUTGASSING
BMS5-142 LOW DENSITY SEALANT
BMS5-146 CARGO LINER JOINT SEALING TAPES
BMS5-148 STRUCTURAL REPAIR ADHESIVE FOR METAL BOND, 270 F SERVICE
BMS5-149 INSULATION BLANKET TAPES
BMS5-150 PRESSURE AND ENVIRONMENTAL SEALANT - NON-CHROMATE TYPE
BMS5-154 ADHESIVE FOR COMPOSITE BONDING (350 F CURE)
BMS5-157 ADVANCED INSULATION BLANKET TAPES
BMS5-158 HEAT ACTIVATED FILM ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS
BMS5-160 ADHESIVES FOR PRIMARY STRUCTURE COMPOSITE BONDING
BMS6-4-1 SPECIFICATION FOR PAPER HONEYCOMB CORE SANDWICH MATERIAL
BMS6-8-1 RIGID, FIRE RESISTANT PLASTIC SHEETING FOR GENERAL PURPOSE USE
BMS6-8-2 FLAME RESISTANT POLYESTER FILM
BMS6-8-3 SUPPORTED VINYL LAMINATE
BMS6-8-5 FORMED THERMAL - ACOUSTICAL INSULATION
BMS6-8-6 VINYL COATED SYNTHETIC FABIRC
BMS6-8-7 VAPOR PERMEABLE NEOPRENE COATED NYLON
BMS6-8-8 STRUCTURAL LOW-PRESSURE LAMINATED PHENOLIC SHEETING
BMS6-8-9 Flexible Polyvinyl Chloride Extrusions and Molded Parts
BMS7-2 ALUMINUM ALLOY BISCUIT HAND FORGINGS
BMS7-3 ZK60 MAGNESIUM ALLOY EXTRUDED BARS, RODS, SHAPES AND TUBING
BMS7-4 PURE TITANIUM SHEET AND STRIP (LOW RESIDUAL) ANNEALED
BMS7-5 ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (7075)
BMS7-6 CONSUMABLE ELECTRODE VACUUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK
BMS7-7 COMMERCIALLY PURE TITANIUM SHEET AND STRIP ANNEALED
BMS7-8 75S-T6 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES)
BMS7-9 24S-T4 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES
BMS7-10 HIGH LEAD BRONZE BAR, CONTINUOUS CAST (75 Cu-20Pb-5Sn)
BMS7-11 CENTRIFUGALLY CAST CORROSION AND HEAT RESISTANT ALLOY TUBE STOCK
BMS7-12 STEEL PLATE, SHEET AND STRIP, CORROSION RESISTANT 17 Cr 7 Ni 1 AL (17-7PH)
BMS7-13 EK30A-T6 MAGNESIUM ALLOY CASTINGS
BMS7-14 EZ33A-T5 MAGNESIUM ALLOY CASTINGS
BMS7-15 PRECIPITATION HARDENING STAINLESS STEEL BAR, BISCUIT, FORGINGS AND FORGING STOCK (17-7PH)
BMS7-16 HK 31XA-T6 MAGNESIUM ALLOY CASTINGS
BMS7-17 TITANIUM ALLOY FORGING, BAR AND PLATE (3A1-5Cr) LOW CARBON
BMS7-18 FORGINGS-TITANIUM ALLOY
BMS7-19 TITANIUM ALLOY FORGING AND BAR (4A1-4Mn)
BMS7-20 STEEL TUBING, SEAMLESS, (MECHANICAL) MODIFIED 4330
BMS7-21 TITANIUM AND TITANIUM ALLOY DUCTING
BMS7-22 MAGNESIUM ALLOY SHEET AND STRIP
BMS7-23 ALUMINUM ALLOY PERMANENT MOLD AND SEMI-PERMANENT MOLD 356-T6 CASTINGS
BMS7-24 TITANIUM ALLOY FORGING, BAR AND PLATE 5Al-1.5Cr-l.5Fe-l.5Mo
BMS7-25 TITANIUM ALLOY ROD AND WIRE (4Al-4Mn) ANNEALED
BMS7-26 STEEL BAR, FORGING STOCK, AND TUBING - 4340 MODIFIED
BMS7-27 STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4330)MODIFIED)
BMS7-28 STEEL BARS, RODS AND FORGING STOCK (4340)
BMS7-29 STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4140)
BMS7-30 STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8740)
BMS7-31 STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8630)
BMS7-32 STEEL BARS, FORGING STOCK AND MECHANICAL TUBING
BMS7-33 STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (4335 MODIFIED)
BMS7-34 4330M SHEET, STRIP AND PLATE
BMS7-35 ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (X7178)
BMS7-37 TUBING, STEEL, CORROSION- RESISTANT (18-8) AIRCRAFT HYDRAULIC SYSTEM
BMS7-38 WELD FILLER METAL, NICKEL BASE AND COBALT BASE ALLOYS
BMS7-39 TITANIUM ALLOY SHEET, PLATE AND STRIP - 6Al-4V
BMS7-40 ALUMINUM ALLOY ROLL FORGED RINGS
BMS7-41 CORROSION-RESISTANT STEEL ( AISI 321 OR 347) PNEUMATIC DUCTING
BMS7-42 ALUMINUM ALLOY CLAD 7075 SHEET AND STRIP, THIN GAUGE
BMS7-43 Ti 6Al-4V ALLOY BAR AND FORGINGS
BMS7-44 Ti, 6A1-4V, EXTRUDED AND ROLLED STRUCTURAL SHAPES
BMS7-45 AM350 SHEET AND STRIP
BMS7-48 CABLE, STEEL (CORROSION RESISTANT) FLEXIBLE, PREFORMED NON-ROTATING TYPE
BMS7-51 STEEL, CHROMIUM - NICKEL - MOLYBDENUM - 4340, SPECIAL QUALITY
BMS7-53 WELD FILLER WIRE, 16Cr-8Ni-2Mo
BMS7-56 TUBING, PNEUMATIC, HASTELLOY X
BMS7-57 SOLDERING FLUX, ORGANIC BASE
BMS7-58 HIGH STRENGTH STEEL CASTINGS
BMS7-59 WELD FILLER WIRE, 17-7PH
BMS7-60 STEEL BARS, RODS AND FORGING STOCK (AMS 6407) 1.2 Cr-2.0 Ni - 0.45 Mo
BMS7-61 ALUMINUM ALLOY TUBING, DRAWN X7075-T6, SEAMLESS
BMS7-62 TITANIUM ALLOY STRIP - 6Al-4V
BMS7-63 SHEET AND STRIP SPECIAL TOLERANCES - 17-7PH
BMS7-64 AM350 SHEET AND STRIP SPECIAL TOLERANCES
BMS7-65 PH 15-7Mo SHHET AND STRIP, SPECIAL TOLERANCES
BMS7-66 DILICON METAL POWDER
BMS7-67 TITANIUM ALLOY SHEET AND PLATE 6Al - 4V
BMS7-68 AM355 SHEET AND STRIP, SPECIAL TOLERANCES
BMS7-69 TITANIUM ALLOY, BAR AND FORGING 7Al-4Mo
BMS7-70 COLUMBIUM ALLOY WELD FILLER WIRE
BMS7-71 WELD FILLER WIRE, 13Cr-9Ni-1Al
BMS7-72 ALUMINUM ALLOY PLATES AND SHEETS, BARE, 2014
BMS7-73 TUBING, STEEL, CORROSION- RESISTANT (18-8 STABILIZED)
BMS7-74 TUBING, STEEL, CORROSION- RESISTANT (18-8) ANNEALED AIRCRAFT HYDRAULIC SYSTEM
BMS7-75 WELD FILLER WIRE, ALUMINUM ALLOYS
BMS7-76 NICKEL BASE ALLOY SHEET AND STRIP TYPE M-252 - (J-1500)
BMS7-77 WELD FILLER WIRE, LOW ALLOY HEAT TREATABLE STEEL
BMS7-78 Castings, Magnesium Alloy, High Strength
BMS7-79 RENE' 41 TUBING
BMS7-80 STEEL-CHROMIUM-MOLYBDENUM- VANADIUM (SAE H-11 TYPE)
BMS7-81 WELD FILLER WIRE, 17-4PH
BMS7-82 NICKEL BASE ALLOY X (AISI 680, UNS N06002) PNEUMATIC DUCTING
BMS7-83 SILVER BASE BRAZING ALLOY
BMS7-84 SHEET AND PLATE, 17-4 PH
BMS7-85 WELD FILLER WIRE, PH15-7Mo
BMS7-86 TITANIUM ALLOY SHEET AND STRIP 13V-11Cr-3Al GENERAL APPLICATIONS
BMS7-87 TITANIUM ALLOY SHEET AND STRIP 4Al-3Mo-1V
BMS7-88 WELD FILLER WIRE, AM-355
BMS7-89 WELD FILLER WIRE, B120VCA
BMS7-90 WELD FILLER WIRE, 19-9 WX
BMS7-91 PH 15-7Mo EXTRUSION
BMS7-92 PH15-7Mo Bars, Forgings, and Plate PRELIMINARY RESEARCH & DEVELOPMENT
BMS7-94 STEEL-SHEET, STRIP AND PLATE (4340 MODIFIED)
BMS7-95 NICKEL BASE ALLOY, TYPE RENE' 41, SHEET, STRIP AND PLATE
BMS7-96 ROLLED OR FORGED BARE NICKEL-BASE, HEAT-RESISTANT TYPE RENE' 41
BMS7-97 MOLYBDENUM-0.5% TITANIUM, 0.1% ZIRCONIUM ALLOY SHEET AND STRIP
BMS7-98 COLUMBIUM - 33 TANTALUM - 1 ZIRCONIUM ALLOY SHEET AND STRIP
BMS7-99 MOLYBDENUM - 0.5% TITANIUM - 0.1% ZIRCONIUM ALLOY BAR AND ROUNDS
BMS7-100 TUBING, HYDRAULIC AM 350 ALLOY COLD REDUCED AND TEMPERED (CRT) CONDITION
BMS7-101 STEEL-SHEET PLATE AND STRIP (SAE H-11 TYPE) ULTRA HIGH STRENGTH 280-300 KSI
BMS7-102 COLUMBIAN - 1 ZIRCONIUM ALLOY SHEET AND STRIP
BMS7-104 COLUMBIUM - 10 TITANIUM - 5 ZIRCONIUM ALLOY SHEET
BMS7-105 2219 ALUMINUM ALLOY SHEET AND PLATE
BMS7-107 CABLE: SINGLE STRAND, NONFLEXIBLE CARBON STEEL (PREFORMED)
BMS7-108 ALUMINUM ALLOY FORGED RINGS FOR SPECIAL APPLICATIONS
BMS7-109 STEEL SHEET & PLATE ALLOY STRUCTURAL, HIGH STRENGTH GENERAL PURPOSE
BMS7-110 ALUMINUM ALLOY SHEET AND PLATE, ALCLAD FOR WELDED AND HEAT TREATED APPLICATIONS (2219)
BMS7-114 41.60M STEEL BARS, PLATES, AND FORGING STOCK (BILLETS), ALLOY, FOR SPRINGS
BMS7-115 WELD FILLER WIRE, COMMERCIALLY PURE TITANIUM
BMS7-116 Cr-Mo-A1 STEEL FOR NITRIDING, BARS, BILLETS, AND FORGING STOCK, VACUUM MELTED
BMS7-118 2219 ALUMINUM ALLOY EXTRUSIONS
BMS7-119 FORGING, NICKEL-BASE, HEAT RESISTANT TYPE RENE? 41
BMS7-120 FORGED BLOCK NICKEL-BASE, HEAT-RESISTANT ALLOY TYPE RENE? 41
BMS7-121 2219 ALUMINUM ALLOY DRAWN SEAMLESS TUBE
BMS7-122 CONSUMABLE ELECTRODE VACUUM ARC REMELTED 4330 MODIFIED ( AMS 6411 ) STEEL
BMS7-123 COLUMBIUM ALLOY TUBING
BMS7-124 MOLYBDENUM ALLOY FORGINGS
BMS7-125 COLUMBIUM - 10% TITANIUM 5% ZIRCONIUM BAR AND ROUNDS
BMS7-126 MOLYBDENUM SEAMLESS TUBING
BMS7-127 PLATINUM ALLOY WIRE
BMS7-128 BRAZING ALLOY TITANIUM AND ZIRCONIUM BASE
BMS7-129 HASTELLOY X FOIL
BMS7-130 COLD ROLLED COLUMBIUM - 10 TUNGSTEN - 10 HAFNIUM ALLOY SHEET AND STRIP
BMS7-131 2219 ALUMINUM ALLOY FORGINGS
BMS7-134 Weld Filler Wire, Corrosion and Heat Resistant Alloys (AISI 3-12)
BMS7-136 AGE HARDENABLE NICKEL ALLOY (12.5 Cr-6 Mo-2.6 Ti-34 Fe) SHEET, STRIP AND PLATE (INCOLOY 901)
BMS7-138 PALLADIUM FOIL
BMS7-139 TUBE, STEEL (CARBON, MECHANICAL; SEAMLESS AND WELDED)
BMS7-140 PIPE AND TUBING, HASTELLOY X, COMMERCIAL QUALITY
BMS7-141 HEAT RESISTANT BRAZING ALLOYS
BMS7-143 TUBING, HASTELLOY "C", SPECIFICATION FOR
BMS7-144 ALLOY FORGINGS, NICKEL BASE HEAT RESISTANT, ALLOY TYPE INCONEL 718
BMS7-145 4 - 6 INCH THICK 2219 ALUMINUM ALLOY PLATE FOR CRYOGENIC TANKAGE APPLICATION
BMS7-146 COLD DRAWN WIRE NICKEL-BASE TYPE RENE' 41
BMS7-148 WELD FILLER WIRE, TITANIUM
BMS7-149 WELD FILLER WIRE, CORROSION AND HEAT RESISTANT ALLOYS
BMS7-150 Weld Filler Wire, Precipitation Hardening Stainless Steels
BMS7-152 MAGNESIUM ALLOY ROLL FORGED RINGS
BMS7-153 WELD FILLER WIRE, FLUX CORED
BMS7-154 WELD, FILLER WIRE LOW-CARBON STEEL
BMS7-155 Ti-6A1-4V PRESSURE VESSEL FORGINGS
BMS7-156 356 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND SOLUTION HEAT TREATED AND STABIL- IZATION AGED CONDITIONS
BMS7-157 355 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND THE SOLUTION HEAT TREATED AND STABILIZATION AGED CONDITIONS
BMS7-168 FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE 15.5 Cr - 7 Fe- 2.5 Ti -1 (Cb + Ta) - 0.7 A1 (INCONEL X)
BMS7-171 FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE, 19 Cr - 14 Co -4Mo- 3 Ti - 1.3 Al (Waspaloy) CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED
BMS7-172 FORGINGS, CORROSION AND HEAT RESISTANT ALLOY STEEL, IRON BASE 16 Cr - 25 Ni - 6 Mo, (16-25-6)
BMS7-174 Ti, 6A1-4V, SHEET, STRIP AND PLATE
BMS7-176 THIN WALLED FERRITIC DUCTILE IRON CASTINGS
BMS7-179 STEEL BARS, FORGINGS AND FORGING STOCK, PREMIUM QUALITY, 4140
BMS7-180 7075 ALUMINUM ALLOY EXTRUSIONS, -T73, -T73510 AND -T73511 TEMPER
BMS7-181 TITANIUM TI-6AL-4V ALLOY CASTING
BMS7-182 STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING: 9Ni-4Co
BMS7-185 HYDRAULIC TUBING, CORROSION RESISTANT (21 Cr-6Ni-9Mn)
BMS7-186 ALUMINUM ALLOY FORGINGS
BMS7-187 NICKEL-BASE ALLOY 22Cr-9Mo-4Nb: SHEET, STRIP AND PLATE
BMS7-188 NICKEL-BASE ALLOY, NICKEL ALLOY 625 (UNS N06625), PNEUMATIC DUCTING
BMS7-189 BAR & FORGINGS. HEAT & CORROSION RESISTANT ALLOY, IRON BASE, 13 Cr, 8 Ni, 1 Al, 2.25 Mo (Ph 13-8 Mo)
BMS7-191 SHEET, STRIP, AND PLATE (21Cr-6Ni-9Mn)
BMS7-192 NICKEL BASE ALLOY (22Cr-9Mo-4Nb) RODS, BARS AND FORGING STOCK
BMS7-193 NICKEL BASE ALLOY (22Cr-9Mo-4Cb) CASTINGS
BMS7-194 HIGH STRENGTH, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE
BMS7-196 STRUCTUAL 2024 ALUMINUM ALLOY TUBING
BMS7-197 Ti, 6AI-4V, CONTINUOUSLY ROLLED SHEET AND FOIL
BMS7-198 DUCTS - ALUMINUM ALLOY
BMS7-202 TITANIUM 6AL-4V TUBING FOR STRUCTURAL APPLICATIONS
BMS7-203 TI, 3AL-2.5V, SEAMLESS TUBING FOR HYDRAULIC SYSTEMS
BMS7-207 ELECTROFORMED NICKEL
BMS7-209 PERFORATED METAL SHEET
BMS7-211 TITANIUM AND TITANIUM ALLOY FOIL, CONTINUOUSLY ROLLED
BMS7-213 BAR, WIRE, TUBING, AND FORGING STOCK HEAT AND CORROSION RESISTANT ALLOY, IRON BASE, 12Cr-9Ni-2Cu-1Ti (12-9-2 STAINLESS STEEL)
BMS7-214 HIGH STRENGTH, STRESS CORROSION RESISTANT ALUMINUM ALLOY FORGINGS
BMS7-218 WELD FILLER WIRE, TITANIUM AND TITANIUM ALLOYS
BMS7-223 CONSUMABLE ELECTRODE VACUUM ARC STEEL BILLETS, BARS AND FORGING-5 CR-1.4 MO 1.35W
BMS7-224 TIN-BASE SOLDERING ALLOY
BMS7-225 HIGH STRENGTH STEEL AND CORROSION RESISTANT ALLOY EXTRUSIONS
BMS7-232 CONDUIT, FLEXIBLE, STAINLESS STEEL
BMS7-234 TUBING: TITANIUM 3A1-2.5V SEAMLESS COLD WORKED AND STRESS RELIEVED
BMS7-240 15-5PH (UNS S15500) SHEET, PLATE, AND STRIP
BMS7-243 PERFORATED METAL SHEET WITH FOROUS METAL OVERLAY
BMS7-244 7175 ALUMINUM ALLOY, EXTRUDED BAR, RODS AND SHAPES
BMS7-245 TITANIUM ALLOY 6Al-2Sn-4Zr-2Mo BAR FORGING STOCK AND FORGINGS
BMS7-246 TITANIUM ALLOY TI-6Al-2Sn-4Zr-2Mo, SHEET, STRIP AND PLATE
BMS7-247 TITANIUM 6Al-4V FORGINGS PREMIUM QUALITY
BMS7-249 VACCUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK
BMS7-250 STEEL BARS AND FORGING STOCK SAE 4340, DOUBLE VACUUM MELTED
BMS7-251 PERFORATED TITANIUM SHEET FOR ACOUSTIC APPLICATIONS
BMS7-254 ALUMINUM ALLOY PLATE, 2324
BMS7-255 ALUMINUM ALLOY EXTRUSIONS, 2224
BMS7-256 ALUMINUM ALLOY PLATE, 7150
BMS7-257 ALUMINUM ALLOY EXTRUSIONS, 7150-T651X
BMS7-260 TITANIUM 10V-2Fe-3AI FORGED BLOCK/BAR AND DIE FORGINGS
BMS7-261 ALUMINUM POWDERED METAL ALLOYS, EXTRUDED BAR, ROD AND SHAPES
BMS7-265 WIRE ROPE FOR AIRCRAFT CONTROLS-FLEXIBLE
BMS7-269 TITANIUM ALLOY 6Al-4V FORGINGS, BETA ANNEALED
BMS7-270 ALUMINUM ALLOY ROD AND WIRE, 7050
BMS7-272 ALLOY STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING - 1.83 Ni, 0.84 Cr, 2.50 Si, 0.40 Mo, 0.21 V (0.39-0.44C)
BMS7-274 FLUX, SOLDERING, LIQUID (ROSIN BASE) TYPE RA
BMS7-277 ALUMINUM POWERED METAL ALLOYS, DIE FORGINGS
BMS7-281 TITANIUM ALLOY 15V-3Cr-3AI-3Sn STRIP
BMS7-282 WELD FILLER WIRE, TWISTED, CARBON STEEL
BMS7-285 SOLDER PASTE, TIN-LEAD AND TIN-LEAD SILVER ALLOYS
BMS7-287 ALUMINUM-LITHIUM ALLOY 2090 EXTRUSIONS
BMS7-291 ALUMINUM-LITHIUM ALLOY 2090 BARE SHEET
BMS7-302 HIGH FORMABILITY 7075-0 BARE AND ALCLAD ALUMINUM SHEET
BMS7-305 HIGH FORMABILITY 2024-0 ALCLAD ALUMINUM SHEET
BMS7-306 HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS, 7150-T7751X
BMS7-307 HIGH STRENGTH 7055 ALUMINUM ALLOY PLATE
BMS7-308 HIGH STRENGTH 7055 ALUMINUM ALLOY EXTRUSIONS
BMS7-310 TI-6AI-4V HOT ISOSTATIC PRESSED CASTING
BMS7-312 HIGH FORMABILITY 6061-0 BARE ALUMINUM SHEET
BMS7-316 HIGH TOUGHNESS ALCAD ALUMINUM ALLOY 2XXX SHEET AND PLATE
BMS7-318 SUPERPLASTIC FORMABLE 7475 BARE ALUMINUM SHEET
BMS7-320 TITANIUM 3Al-8V-6Cr-4Mo-4Z r (BETA C) WIRE AND BAR, COLD DRAWN
BMS7-323 HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE
BMS7-324 Ti-15V-3Cr-3Al-3S n HOT ISOSTATIC PRESSED CASTINGS
BMS7-325 7050 ALUMINUM ALLOY SHEET (BARE)
BMS7-326 ALUMINUM-FIBERGLASS LAMINATE MATERIAL
BMS7-327 HIGH TOUGHNESS BARE ALUMINUM ALLOY 2XXX SHEET AND PLATE
BMS7-328 TUBING, ALUMINUM, 6061 ALLOY, ROUND, SEAMLESS, DRAWN HYDRAULIC AND PNEUMATIC SYSTEMS
BMS7-329 RECRYSTALLIZED ALUMINUM-LITHIUM ALLOY 8090-T3 SHEET
BMS7-330 ALUMINUM ALLOY D357.0-T6 CASTING FOR AIRCRAFT STRUCTURAL APPLICATIONS
BMS7-331 WELD FILLER WIRE, TITANIUM ALLOY
BMS7-332 PH13-8Mo CRES BAR, FORGING STOCK, FORGINGS AND EXTRUSIONS WITH CONTROLLED FRACTURE TOUGHNESS
BMS7-333 TITANIUM ALLOY Ti-15V-3Cr-3Al-3Sn-DUCTING, PNEUMATIC SYSTEM DUCTS
BMS7-334 TITANIUM ALLOY BETA 21S STRIP AND SHEET
BMS7-335 RESIN BONDED LAMINATED SHIM STOCK
BMS7-336 Ti-6Al-2Sn-4Zr-2Mo-0.08Si HOT ISOSTATIC PRESSED CASTINGS
BMS7-337 COBALT ALLOY 6B, SHEET AND PLATE
BMS7-338 COBALT ALLOY 6B, BAR AND BILLET
BMS7-340 NICKEL-BASE ALLOY, NICKEL ALLOY 718 (UNS N07718), PNEUMATIC DUCTING
BMS7-342 SHOT PEENING MEDIA
BMS7-343 TITANIUM ALLOY 15V-3Cr-3Al-3Sn BAR
BMS7-347 PREMIUM GRADE TITANIUM ALLOY SHEET, 6Al-4V
BMS7-348 THICK SECTION TITANIUM 6AL-4V FORGED BLOCK
BMS7-349 BARS, FORGINGS, AND FORGING STOCK VACUUM INDUCTION MELTED - VACUUM ARC REMELTED (VIM - VAR) PH13-8Mo CRES
BMS7-353 COPPER-BERYLLIUM ALLOY BARS, RODS, AND MECHANICAL TUBING, 98Cu-1.9B e, (UNS C17200) SOLUTION TREATED ANDAGED
BMS7-354 COBALT-NICKEL ALLOY, HIGH STRENGTH, CORROSION AND HEAT RESISTANT WIRE AND BARS, UNS R30159
BMS7-355 HIGH STRENGTH FATIGUE AND DAMAGE TOLERANT, STRESS CORROSION RESISTANT 7040 ALUMINUM ALLOY PLATE
BMS7-357 XD 15 NW CORROSION RESISTANT STEEL BAR
BMS7-360 TITANIUM 5Al-5V-5Mo-3Cr DIE FORGINGS AND BARS
BMS7-361 LASER DEPOSITED TI-6AL-4V PREFORMS, STRESS-RELIEVED AND AGED
BMS7-363 FORMABLE 2024-T4 BARE AND CLAD SHEET
BMS7-364 12Cr-11Ni-1.7Ti-1Mo CORROSION RESISTANT STEEL BAR, WIRE, FORGINGS, AND FORGING STOCK (UNS S46500)
BMS7-367 HIGH FORMABILITY DRAWN ALUMINUM TUBING
BMS7-369 6AL-4V TITANIUM ALLOY BETA FORGED DIE FORGINGS
BMS7-370 ALUMINUM ALLOY FORGINGS, THICK SECTION, HIGH STRENGTH, HIGH FRACTURE TOUGHNESS, STRESS CORROSION RESISTANT
BMS7-371 HIGH STRENGTH 7136 ALUMINUM ALLOY EXTRUSIONS
BMS7-372 5AL-5V-5Mo-3Cr TITANIUM ALLOY EXTRUSION, BETA ANNEALED, SLOW COOLED AND AGED (BASCA-160) CONDITION
BMS7-375 ALUMINUM LITHIUM 2099 T83 ALLOY EXTRUSIONS
BMS7-380 TITANIUM 6AL-4V ANNEALED OR CREEP FLATTENED PLATE
BMS7-381 HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALUMINUM ALLOY PLATE
BMS8-2 GENERAL PURPOSE, RIGID, FIRE RETARDED GLASS FABRIC REINFORCED PLASTIC SHEETING
BMS8-3 LAMINATED SIGHTING DOMES
BMS8-4 FLAT LAMINATED ACRYLIC SHEET
BMS8-5 LAMINATED PLASTIC AIR DUCTS
BMS8-6 FLEXIBLE AND SEMI-RIGID LAMINATED FABRIC AIRDUCTS
BMS8-7 VAPOR-PERMEABLE NEOPRENE-COATED NYLON
BMS8-8 HIGH TEMPERATURE AIR DUCT INSULATION
BMS8-9 NON SELF-SEALING FUEL CELL BACKING BOARD
BMS8-10 PLASTIC TUBING FOR WATER LINES
BMS8-11 LAMINATED PLASTIC SHEET - POST FORMING GRADE
BMS8-12 RIGID LOW-PRESSURE LAMINATED PLASTIC SHEET
BMS8-13 BACKING BOARD FOR FUEL CELL SUPPORT
BMS8-14 B-47 CANOPY
BMS8-15 LIQUID AROMATIC POLYAMINE HARDENER FOR EPOXY RESINS
BMS8-16 LIQUID EPOXY RESIN, MEDIUM VISCOSITY
BMS8-17 FLEXIBLE & SEMIRIGID AIR DUCTS, AND FLEXIBLE COUPLING FOR RIGID DUCTS
BMS8-18 FLAME RETARDANT TREATED COTTON FABRIC
BMS8-19 SPECIFICATION FOR FABRIC, IMPREGNATED LIGHT WEIGHT, HIGH STRENGTH, SYNTHETIC FIBER
BMS8-20 LAMINATED PLASTIC SHEET, METAL CLAD
BMS8-24 SILICONE RUBBER COATED GLASS FABRIC
BMS8-25 VINYL, LAMINATED FOR INTERIOR OF COMMERCIAL AIRCRAFT
BMS8-26 NON-SELF SEALING FUEL CELL FLEXIBLE BACKING BOARD
BMS8-27 SYNTHETIC FABRIC VAPOR PERMEABLE
BMS8-28 AIRCRAFT FLOOR COVERING
BMS8-29 LIQUID METHYL NADIC ANHYDRIDE CURING AGENT FOR EPOXY RESINS
BMS8-30 STRUCTURAL FOAM-IN-PLACE ADHESIVE
BMS8-31 PARACHUTE PACK NYLON WATER REPELLENT TREATED
BMS8-32 METAL CLAD FLEXIBLE LAMINATE
BMS8-33 SYNTHETIC FABRIC, FLAME RESISTANT, COATED
BMS8-34 STRETCHED ACRYLIC PLASTICS
BMS8-35 STYRENE COPOLYMER SHEET
BMS8-36 AIRCRAFT CARPET AND UNDERLAY MATERIALS
BMS8-37 ACOUSTICAL INSULATION - FLEXIBLE POLYURETHANE FOAM
BMS8-38 FOAM-URETHANE, RIGID FLUOROCARBON-BLOWN
BMS8-39 FLEXIBLE URETHANE FOAM
BMS8-40 FLEXIBLE POTTING COMPOUNDS, ELECTRICAL
BMS8-41 EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS
BMS8-42 VIBRIN 135 (TRIALLYL CYANURATE MODIFIED) POLYESTER RESIN
BMS8-43 REINFORCED PLASTIC SHEEING FOR SANDWICH CONSTRUCTION
BMS8-44 POLYVINYL CHLORIDE PLASTISOLS, CAST AND MOLDED
BMS8-45 TAMPER-PROOF PUTTY
BMS8-46 PRE-IMPREGNATED REINFORCEMENTS, POLYESTER, FIRE RESISTANT, GENERAL PURPOSE
BMS8-47 COATED FABRIC, HIGH MASS, FLEXIBLE
BMS8-48 THERMAL-ACOUSTICAL FIBERGLASS INSULATION
BMS8-49 FIRE RESISTANT, POLYESTER REIN PREIMPREGNATED OPEN WEAVE GLASS FABRIC FOR GENERAL PURPOSE USE
BMS8-50 MOLDED THERMAL INSULATION FOR MISSILE APPLICATION
BMS8-51 SHOCK ABSORBING FLEXIBLE POLYETHER URETHANE FOAM
BMS8-52 STRUCTURAL LOW PRESSURE LAMINATED EPOXY SHEETING, AND PARTS, SELF-EXTINGUISHING
BMS8-53 LAMINATED THERMOSETTING PLASTIC SHEETING, PAPER BASE
BMS8-54 GLASS FABRIC, PREIMPREGNATED, SELF- EXTINGUISHING EPOXY
BMS8-55 COATED SYNTHETIC FABRIC
BMS8-56 RIGID URETHANE FOAM AIR DUCTS
BMS8-57 GLASS FIBER-REINFORCED FIRE RESISTANT PLASTIC AIR DUCTS
BMS8-58 HIGH TEMPERATURE RESISTANT PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC
BMS8-59 AIRCRAFT DRAPERY AND CURTAIN MATERIALS - SELF EXTINGUISHING
BMS8-60 AIRCRAFT UPHOLSTERY FABRICS, SELF-EXTINGUISHING
BMS8-61 FOAM - URETHANE, FLEXIBLE
BMS8-62 DECORATIVE VINYL COATED FABRICS - SELF-EXTINGUISHING
BMS8-63 FOAM-URETHANE, RIGID CLOSED CELL, FOAM-IN-PLACE
BMS8-64 FABRIC, FLOW RESISTANT, ACOUSTIC
BMS8-65 T.A.C. MODIFIED POLYESTER LAMINATING RESIN AND T.A.C. MODIFIED POLYESTER IMPREGNATED GLASS FABRIC
BMS8-66 GLASS, MONOLITHIC AND LAMINATED AIRCRAFT GLAZING ASSEMBLIES
BMS8-67 GLASS FABRIC PREIMPREGNATED, AUTOCLAVE MOLDING GRADE
BMS8-68 HIGH TEMPERATURE (400 F), FLEXIBLE, ELECTRICAL SEALING AND POTTING COMPOUND
BMS8-69 ISULATIVE COATING COMPOUND FOR ELECTRONIC ASSEMBLIES
BMS8-70 RESIN BONDED CORK ABLATIVE INSULATION MATERIAL
BMS8-71 TFE - FLUOROCARBON RESIN MOLDING AND EXTRUSION MATERIALS
BMS8-72 THERMOSETTING REINFORCED PHENOLIC RESIN MOLDING COMPOUND
BMS8-73 FOAM, CLOSED CELL (FOAM-IN-PLACE)
BMS8-74 GLASS FABRIC, PREIMPREGNATED, SELF-EXTINGUISHING EPOXY RESIN
BMS8-75 FLEXIBLE CABLE MOLDING COMPOUND
BMS8-76 POLYVINYL CHLORIDE CABLE JACKETING
BMS8-77 GLASS FILLED POLYAMIDE (NYLON) MOLDING COMPOUND AND PARTS
BMS8-78 EPOXY POLYAMIDE ABLATIVE, INSULATION MATERIAL
BMS8-79 GLASS FABRIC PREIMPREGNATED EPOXY RESIN LOW TEMPERATURE CURING
BMS8-80 FIRE RESISTANT, POLYESTER RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE
BMS8-81 POLYURETHANE POTTING - MOLDING COMPOUND, ELECTRIC CABLE
BMS8-83 FLEXIBLE, PLASTIC HOSE
BMS8-84 FORMED THERMAL-ACOUSTICAL INSULATION
BMS8-85 GLASS FABRIC HONEYCOMB CORE
BMS8-86 PLASTIC, ABS SHEET, FLAME RESISTANT
BMS8-87 AIRCRAFT UPHOLSTERY LEATHER, GENUINE AND ARTIFICIAL
BMS8-89 POLYVINYL CHLORIDE, POLYVINYL FLUORIDE AND POLYETHYLENE TEREPHTHALATE LAMINATES AND POLYVINYL CHLORIDE UNSUPPORTED SHEET
BMS8-90 MICROWAVE DIELECTRIC MATERIAL
BMS8-91 POLYESTER-ALUMINUM LAMINATE TAPE
BMS8-92 FLEXIBLE, FUEL RESISTANT ELECTRICAL POTTING COMPOUND
BMS8-95 FABRIC , FLAME RESISTANT , HYPALON COATED
BMS8-96 FOAM - RIGID POLYURETHANE
BMS8-98 POLYVINYL FLUORIDE FILM
BMS8-99 PLASTIC, ABS SHEET, FOR ELECTRONIC USAGE
BMS8-100 RIGID, HIGH IMPACT-FIRE RESISTANT GLASS REINFORCED EPOXY SHEETING
BMS8-101 ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES
BMS8-103 TROWELABLE CORK, ABLATIVE INSULATION MATERIAL
BMS8-104 AIR DUCT INSULATION, NONCORROSIVE TO STAINLESS STEEL
BMS8-106 REINFORCED POLYTETRAFLUOROETHYLENE (TFE)
BMS8-109 POLYURETHANE DIELECTRIC ENCAPSULANTS
BMS8-110 PLASTIC SHEET, LAMINATED, THERMO-SETTING, PAPER BASE, PHENOLIC-RESIN COMMERICAL QUALITY
BMS8-113 STRUCTURAL POLYURETHANE FOAM
BMS8-114 Glass Roving Reinforced Epoxy Resin Panels
BMS8-115 POLYMER COATED FABRIC - FLAME RESISTANT
BMS8-116 EMBEDDING COMPOUND FOR ELECTRONIC ASSEMBLIES
BMS8-117 GLASS FABRIC PREIMPREGNATED, EPOXY RESIN
BMS8-118 GLASS FABRIC, PREIMPREGNATED, B-STAGED EPOXY RESIN FOR ELECTRONIC LAMINATES
BMS8-120 LAMINATED, COPPER CLAD GLASS EPOXY (FOR PRINTED-WIRING BOARDS)
BMS8-121 POLYTETRAFLUORETHYLENE PARTS AND STOCK SHAPES
BMS8-122 HONEYCOMB CORE-SPLICING FOAM MATERIAL
BMS8-124 NONMETALLIC HONEYCOMB CORE
BMS8-125 REINFORCED PLASTICS HONEYCOMB CORE FOR CONTINUOUS ELEVATED TEMPERATURE SERVICE
BMS8-126 POLYIMIDE STRUCTURAL FOAM FOR ELEVATED TEMPERATURE (400-500F) SERVICE
BMS8-129 HIGH TEMPERATURE PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC
BMS8-132 FIRE RESISTANT EPOXY RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE
BMS8-133 FLAME RETARDANT RIGID URETHANE FOAMS
BMS8-135 POLYCARBONATE MOLDING COMPOUNDS, STOCK AND MOLDED SHAPES
BMS8-137 FLEXIBLE POLYVINYL CHLORIDE EXTRUSIONS AND MOLDED PARTS
BMS8-139 GLASS FABRIC PREIMPREGNATED HIGH-TEMPERATURE-RESISTANCE EPOXY RESIN
BMS8-141 AIRCRAFT CABIN WINDOW SHADE MATERIALS
BMS8-142 INSULATION COVERING, SELF-EXTINGUISHING
BMS8-143 EPOXY PREIMPREGNATED ARAMID PAPER AND GLASS FABRIC FOR INTERIOR DECORATIVE LAMINATES
BMS8-144 POLYIMIDE RESIN IMPREGNATED STRUCTURAL FIBERGLASS FABRIC
BMS8-145 HIGH TEMPERATURE RESISTANT EPOXY ADHESIVE FILM GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES
BMS8-150 RIGID PVC FOAM CORE
BMS8-151 EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANELS AND LAMINATES, AND ELECTRICAL ISOLATION
BMS8-154 HIGH STRENGTH GLASS FABRIC PREIMPREGNATED, HIGH TEMPERATURE RESISTANT, EPOXY RESIN
BMS8-163 RESIN, POLYESTER, LOW PRESSURE MOLING, SELF-EXTINGUISHING
BMS8-164 EPOXY RESIN PREIMPREGNATED NONWOVEN S-GLASS FIBER MATERIALS
BMS8-168 EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 250F (121C) CURE
BMS8-169 GLASS FABRIC PREIMPREGNATED EPOXY RESIN, VACUUM BAG PROCESS
BMS8-175 ACRYLIC-POLYVINYLCHLORIDE SHEETS
BMS8-176 RESIN FILMS FOR BACKCOATING TEXTILES
BMS8-177 GLASS FABRIC REINFORCEMENT FOR HIGH STRENGTH PLASTIC LAMINATE PRODUCTS
BMS8-178 FOAM SANDWICH COMPOSITE FOR USE IN CARGO LINER APPLICATIONS
BMS8-185 RIGID GLASS FIBER REINFORCED PLASTIC LAMINATE, ABRASIVE RESISTANT SURFACE ONE SIDE
BMS8-187 SYNTACTIC FOAM, EPOXY COATED - HOLLOW GLASS MICROSPHERES, FOR ELECTRONIC APPLICATIONS
BMS8-190 HIGH THERMAL CONDUCTIVITY EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS
BMS8-191 HIGH MODULUS EPOXY RESIN SYSTEM
BMS8-192 NONMETALLIC HONEYCOMB-GLASS FABRIC REINFORCED - MIRCO CELL SIZE
BMS8-193 AUXILIARY RESINS FOR USE WITH SINGLE STAGE SANDWICH PANELS
BMS8-195 HIGH TEMPERATURE RESISTANT ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES FOR ELECTRICAL APPLICATIONS
BMS8-196 EPOXY RESIN PREIMPREGNATED NON-WOVEN E-GLASS FIBER MATERIALS
BMS8-197 SHEET MOLDING COMPOUND, POLYESTER FIBERGLASS, SELF EXTINGUISHING
BMS8-199 MAT, FIBROUS GLASS
BMS8-201 FIBERGLASS RESIN
BMS8-202 EPOXY-UNIDIRECTIONAL GLASS LAMINATES
BMS8-203 EPOXY PRE-IMPREGNATED UNIDIRECTIONAL GRAPHITE
BMS8-205 POLYETHER-POLYURETHANE INJECTION MOLDING MATERIAL FOR ELECTRIC CABLE
BMS8-206 GLASS FABRIC REINFORCED EPOXY PREPREG FOR HIGH PRESSURE MOLDED LAMINATES
BMS8-207 RESIN, SEALING AND POTTING, FOR FLAME SPRAY APPLICATION
BMS8-208 EPOXY PREIMPREGNATED GLASS FABRIC - OVEN CURED
BMS8-209 POLYVINYLIDENE CHLORIDE EMULSION
BMS8-212 EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177C) CURE
BMS8-213 HARDENER, AROMATIC POLYAMINE FOR EPOXY RESINS
BMS8-214 RESIN, EPOXY MEDIUM VISCOSITY
BMS8-215 EPOXY RESIN PREIMPREGNATED NONWOVEN GRAPHITE FIBERS
BMS8-216 EPOXY RESIN PREIMPREGNATED NON-WOVEN HIGH MODULUS GRAPHITE FIBERS
BMS8-218 ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (350 F CURING)
BMS8-219 ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (250F CURING)
BMS8-221 POLYETHERSULFONE THERMOPLASTIC, SHEET, INJECTION AND EXTRUSION RESINS AND EXTRUDED PROFILE SHAPES
BMS8-222 MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR AIRCRAFT INTERIOR SANDWICH PANELS
BMS8-223 CARGO LINER, GLASS REINFORCED, PHENOLIC RIGID, HIGH IMPACT, FIRE RESISTANT
BMS8-224 GLASS FABRICS, RESIN IMPREGNATED, FIRE RESISTANT FOR GENERAL PURPOSE USE
BMS8-225 POLYESTER SHEET MOLDING COMPOUND
BMS8-226 MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANEL AND LAMINATES
BMS8-236 FLATWEAVE FABRIC UPHOLSTERY
BMS8-237 CARPET
BMS8-240 DRAPERY AND CURTAIN MATERIAL
BMS8-242 NEEDLED FELT
BMS8-245 ADHESIVE FOR COMPOSITE BONDING (350F CURE)
BMS8-246 COATED, TRANSPARENT POLYCARBONATE MATERIALS
BMS8-247 GRAPHITE FIBER PREIMPREGNATED WITH EPOXY RESIN, UNDIRECTIONAL TAPE 350 DEG F CURE
BMS8-250 FABRIC, SILICONE COATED, FOR FLEXIBLE AIRDUCTS
BMS8-251 POLYCARBONATE THERMOPLASTIC SHEET, INJECTION MOLDING, EXTRUSION AND ROTOMOLDING RESIN
BMS8-253 POLYSULFONE THERMOPLASTIC, SHEET, AND INJECTION, EXTRUSION AND ROTOMOLDING RESIN
BMS8-254 TEXTURE RETENTION MATERIALS FOR FLEXIBLE DECORATIVE LAMINATES
BMS8-255 SILICONE DIELECTRIC ENCAPSULANTS
BMS8-256 EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177 C CURE)
BMS8-258 EPOXY IMPREGNATED GRAPHITE WOVEN FABRICS - 275 F (135 C) CURE VACUUM BAG PROCESS
BMS8-260 ARAMID FABRICS, EPOXY RESIN IMPREGNATED, FOR INTERIOR SANDWICH PANELS AND LAMINATES
BMS8-262 CARGO LINER, "KEVLAR" REINFORCED THERMOSET
BMS8-263 KEVLAR* FABRIC, EPOXY RESIN IMPREGNATED, FOR INTERIOR DECORATIVE LAMINATES
BMS8-264 ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN FOR VACUUM BAG PROCESS
BMS8-267 FORMABLE TEDLAR DECORATIVE ALUMINUM LAMINATE
BMS8-268 TEDLAR/THERMOPLASTIC SHEET LAMINATE
BMS8-269 POLYAMIDE-IMIDE THERMOPLASTIC, INJECTION MOLDING AND EXTRUSION RESINS
BMS8-270 POLYAMIDE (NYLON) INJECTION MOLDING AND ROTOMOLDING RESINS FOR INTERIOR APPLICATIONS
BMS8-271 SHEET MOLDING COMPOUND, PHENOLIC FIBERGLASS
BMS8-273 KEVLAR/PHENOLIC PREPREGS FOR INTERIOR CRUSHED CORE SANDWICH PANELS
BMS8-274 CARBON FIBER/PHENOLIC PREPREG FOR INTERIOR SANDWICH PANELS
BMS8-276 ADVANCED COMPOSITES - 350 F CURE TOUGHENED - EPOXY PREIMPREGNATED CARBON FIBER TAPES AND FABRICS
BMS8-278 ALUMINUM COATED GLASS FIBER CLOTH EPOXY RESIN PREIMPREGNATED
BMS8-283 FLEXIBLE FOAM SOUND DAMPING AND SEALING TAPE
BMS8-285 TEXTILE HOOK AND LOOP FASTENERS
BMS8-286 AIRCRAFT FLOOR MATS
BMS8-289 ALUMINUM FOIL/FABRIC PREPREG OR ADHESIVE FILM LAMINATE MATERIAL
BMS8-293 POLYETHERIMIDE BASED THERMOPLASTIC SHEET, INJECTION, EXTRUSION AND ROTOMOLDING
BMS8-294 EPOXY IMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS SUITABLE FOR LAMINATE STRUCTURE
BMS8-297 EPOXY PREIMPREGNATED CARBON TAPE AND WOVEN FABRIC FOR AIRCRAFT STRUCTURE, 350 F CURE
BMS8-297-1 EPOXY PREIMPREGNATED CARBON FIBER REINFORCEMENTS FOR STRUCTURAL PULTRUSIONS - 350 F (177 C) CURE
BMS8-297-2 EPOXY PREIMPREGNATED BIAS WOVEN CARBON REINFORCEMENT FOR USE ON AUTOMATED LAMINATING MACHINES
BMS8-297-3 EPOXY IMPREGNATED CARBON TAPE FOR AUTOMATED MACHINES - 350F (177C) CURE
BMS8-297-4 EPOXY RESIN - 350F CURE
BMS8-297-5 EPOXY PREIMPREGNATED WOVEN CARBON REINFORCEMENT FOR USE ON PULTRUSION
BMS8-299 URETHANE COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS
BMS8-300 FLEXIBLE POLYIMIDE FOAM
BMS8-301 COMPOSITE STRUCTURAL REPAIR RESINGS TWO PARTS
BMS8-302 RANDOM CARBON FIBER MAT - DRY MAT AND IMPREGNATED WITH 250 F AND 350 F CURE EPOXY
BMS8-303 CONDUCTIVE CARBON FIBER FABRIC/EPOXY - 350 F CURE
BMS8-304 CONDUCTIVE CARBON FIBER, FABRIC/EPOXY, 250 F CURE
BMS8-305 SINGLE COMPONENT SILICONE DIELECRIC ENCAPSULANT
BMS8-306 BISMALEIMIDE ROVING FOR FILAMENT WINDING
BMS8-307 PEEK RESIN IMPREGNATED GRAPHITE TAPE
BMS8-308 PEEL PLY MATERIALS FOR SURFACE PREPARATION OF COMPOSITES
BMS8-310 NONWOVEN PREIMPREGNATED WITH EPOXY RESIN (250F CURING)
BMS8-317 POLYETHER ETHER KETONE (PEEK) THERMOPLASTIC INJECTION MOLDING RESIN
BMS8-318 POLYURETHANE THERMOPLASTIC EXTRUSION AND INJECTION MOLDING RESIN
BMS8-319 POLYETHERKETONEKETONE (PEKK) THERMOPLASTIC
BMS8-320 POLYVINYL FLUORIDE FILM/THERMOPLASTIC SHEET LAMINATE - MEETS 1990 HEAT RELEASE AND SMOKE EMISSION REQUIREMENTS FOR CABIN INTERIOR MATERIALS
BMS8-321 POLYETHERIMIDE BASED THERMOPLASTIC INJECTION MOLDING AND PROFILE EXTRUSION RESIN FOR CABIN INTERIOR APPLICATIONS
BMS8-322 EPOXY COMPOUNDS FOR THE EMBEDMENT OF MAGNETIC DEVICES
BMS8-323 POLYAMIDE (NYLON) INJECTION MOLDING AND EXTRUSION RESINS FOR EXTERIOR APPLICATIONS
BMS8-324 SYNTACTIC CORE
BMS8-325 LAMINATED, COPPER CLAD RESIN IMPREGNATED (FOR PRINTED-WIRING BOARDS)
BMS8-327 EPOXY SHEET MOLDING COMPOUND
BMS8-328 POLYPHENYLSULFONE BASED THERMOPLASTIC
BMS8-330 FLEXIBLE, HIGH TEMPERATURE INSULATION BLANKETS
BMS8-331 ADVANCED COMPOSITES - 350 F CURE EPOXY PREIMPREGNATED FIBERGLASS FABRICS
BMS8-336 EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPOSITE PARTS
BMS8-338 MOLDABLE PLASTIC SHIM
BMS8-339 THERMALLY CONDUCTIVE NONMETALLIC CARBON FIBER HONEYCOMB CORE
BMS8-341 SURFACING FILMS FOR COMPOSITES
BMS8-342 CARBON FIBER-REINFORCED PLASTIC (CFRP) HONEYCOMB CORE
BMS8-343 POLYMER COATED FABRIC, FLAME RESISTANT, FLEXIBLE CARGO LINER
BMS8-344 EPOXY MATERIAL SYSTEMS FOR RESIN TRANSFER MOLDED COMPOSITE PARTS
BMS8-346 MOISTURE BARRIER TAPE
BMS8-347 INSULATION BLANKETS WITH POLYIMIDE FILM FACINGS FOR HIGH TEMPERATURE USE
BMS8-349 FLEXIBLE HIGH TEMPERATURE INSULATION BLANKETS WITH WOVEN FABRIC COVERING
BMS8-350 INTEGRAL SKINNING FLEXIBLE URETHANE FOAM AND PAINT FOR MOLDED PRODUCTS
BMS8-352 MODIFIED SILICONE PREIMPREGNATED FABRIC
BMS8-353 REINFORCED THERMOPLASTIC LAMINATE
BMS8-356 POLYVINYLIDENE FLUORIDE (PVDF BASED FILM)
BMS8-358 THERMOPLASTIC FOAMS
BMS8-360 ADVANCED INSULATION COVERING, SELF-EXTINGUISHING
BMS8-363 PREPREGS FOR HIGH TEMPERATURE APPLICATIONS
BMS8-370 ADVANCED POLYMER COATED FABRIC - FLAME RESISTANT
BMS8-371 FLEXIBLE POLYVINYLIDENE FLUORIDE FOAM
BMS8-372 TEXTILE HOOK AND LOOP FASTENERS, FLAME PROPAGATION RESISTANT
BMS8-373 NEEDLED FELT, FLAME PROPAGATION RESISTANT
BMS8-374 COATED FABRIC, HIGH MASS, FLAME PROPAGATION RESISTANT
BMS8-375 EPOXY PREIMPREGNATED CARBON FIBER TAPE AND WOVEN FABRIC - 350 F (177 C) CURE-SELF ADHESIVE FOR HONEYCOMB STRUCTURE
BMS8-377 INSULATION COVERING, FLAME PROPAGATION RESISTANT
BMS9-1 HIGH TEMPERATURE MINERAL FIBER INSULATION
BMS9-2 FIBER GLASS PAPER FOR CRYOGENIC INSULATION
BMS9-3 GLASS FABRIC REINFORCEMENTS FOR LAMINATED PLASTIC PRODUCTS
BMS9-8 CARBON FIBER REINFORCEMENTS, YARN AND FABRIC
BMS9-9 CARBON REINFORCEMENTS, HIGH STRAIN FIBERS
BMS9-11 CARBON REINFORCEMENTS, BIAS WOVEN AND PLAIN WEAVE
BMS9-12 CONDUCTIVE CARBON FIBER REINFORCEMENT - YARN AND FABRIC
BMS9-16 BIAS CARBON FIBER FABRIC
BMS9-17 CARBON REINFORCEMENTS, HIGH STRENGTH AND INTERMEDIATE MODULUS FIBERS AND FABRICS
BMS9-19 CERAMIC FELT INSULATION
BMS9-20 INSULATION, HIGH TEMPERATURE LOW THERMAL CONDUCTIVITY
BMS9-22 FIBERS FOR RESIN INFUSED COMPOSITES
BMS9-223 BRAIDED PREFORMS
BMS10-1 AROMATIC FUEL RESISTANT PRIMER-SEALER
BMS10-2 COPPER PLATE
BMS10-3 DECALCOMANIAS
BMS10-4 EXTERIOR ALKYD ENAMELS
BMS10-5 FAST-DRY SEMI-GLOSS FINISH
BMS10-6 ALUMINUM HARD COATING
BMS10-8 PORCELAIN ENAMEL MARKINGS ON ALUMINUM ALLOYS
BMS10-9 THINNER, ZINC CHROMATE PRIMER
BMS10-10 SCREEN-APPLIED MASKING MATERIALS
BMS10-11 CHEMICAL AND SOLVENT RESISTANT FINISH
BMS10-13 PRIMER, ZINC CHROMATE, IN AEROSOL SPRAY APPLICATOR
BMS10-14 CHEMICALLY MILLED ALUMINUM ALLOY SURFACES
BMS10-15 LIGHT UNDERCOATING FINISH SYSTEM (B-52 AIRCRAFT)
BMS10-16 BATTERY ELECTROLYTE RESISTANT FINISH (AIR DRYING)
BMS10-17 ALKALINE REMOVABLE EXTERIOR PROTECTIVE COATING
BMS10-18 PRIMER, SYNTHETIC FLUID RESISTANT FINISH
BMS10-19 PEELABLE TEMPORARY PROTECTIVE COATINGS (INDOOR)
BMS10-20 CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS
BMS10-21 ANTI-STATIC COATINGS
BMS10-22 LUSTERLESS EPOXY FINISHES
BMS10-23 ENAMEL, QUICK DRYING
BMS10-24 CERAMIC PROTECTIVE COATING FOR HEAT TREATMENT OF TITANIUM ALLOYS
BMS10-26 PLASTIC FILM FOR MARKERS
BMS10-27 CORROSION PROTECTIVE COATING FOR INTERNAL FUEL TANKS
BMS10-28 HOT MELT STRIPPABLE COATINGS FOR SPECIAL USE
BMS10-29 FLUORESCENT PROTECTIVE COATING FOR ELECTRONIC COMPONENTS
BMS10-30 FLUID RESISTANT DECALS
BMS10-31 CHEMICALLY MILLED TITANIUM PARTS
BMS10-32 COLOR CHANGING PAINT
BMS10-33 CERAMIC HOT FORMING LUBRICANT
BMS10-34 LEAK-DETECTING SYSTEMS
BMS10-35 SEMI-GLOSS EPOXY FINISH
BMS10-36 NICKEL PLATING (ELECTRODEPOSITED)
BMS10-37 MASKANTS FOR CHEMICAL MILLING
BMS10-38 SOLVENT FOR HOT SPRAY APPLICATION OF MIL-S-4383 MATERIAL
BMS10-39 FUEL AND MOSITURE RESISTANT FINISH FOR FUEL TANKS
BMS10-40 CHEMICALLY MILLED STEEL PARTS
BMS10-41 ELECTROLESS NICKEL PLATING
BMS10-43 PRIMER COATING, QUICK DRYING
BMS10-48 ELECTROCHEMICALLY MACHINED FERROUS ALLOYS
BMS10-49 CHEMCIALLY MILLED MAGNESIUM PARTS
BMS10-50 ELECTROLESS NICKEL ON ALUMINUM
BMS10-51 CHLOROSULFONATED POLYETHYLENE COATING
BMS10-52 LIMITED OUTDOOR STRIPPABLE TEMPORARY PROTECTIVE COATINGS
BMS10-53 HIGH TEMPERATURE PRIMER
BMS10-54 DIELECTRIC SCREENING INKS
BMS10-55 INTERIOR DECORATIVE WATER EMULSION PAINTS
BMS10-60 PROTECTIVE ENAMEL
BMS10-61 VINYL LACQUER, LOW PIGMENT GLOSS BLACK
BMS10-67 THERMAL SPRAY POWDERS
BMS10-68 WELD-THROUGH PRIMER
BMS10-70 THIN, DENSE CHROMIUM PLATING
BMS10-72 EXTERIOR DECORATIVE PAINT SYSTEM
BMS10-73 SCREEN PRINTING INKS
BMS10-78 CLEAR BAKING ENAMEL
BMS10-79 URETHANE COMPATIBLE, CORROSION RESISTANT PRIMER
BMS10-82 LOW EMISSIVITY GOLD COATING
BMS10-83 INTERIOR DECORATIVE URETHANE PAINT SYSTEM
BMS10-85 ALUMINUM PIGMENTED COATING FOR FASTENERS
BMS10-86 TEFLON FILLED COATING
BMS10-90 THERMAL CONTROL COATING
BMS10-94 MASKS, SOLDERING
BMS10-97 URETHANE EXTERIOR COATINGS
BMS10-98 COLORED ANODIZED ALUMINUM FOR MANUFACTURE OF MARKERS
BMS10-100 FLEXIBLE CORROSION INHIBITING COATINGS
BMS10-101 URETHANE COATINGS FOR INTEGRAL FUEL TANKS
BMS10-102 FIRE RESISTANT INSULATIVE COATING SYSTEM
BMS10-103 NONCHROMATED PRIMER FOR COMPOSITES
BMS10-107 WATER BASED SCREEN PRINTING INKS
BMS10-108 MARKING TAPES AND ADHESIVE LABELS
BMS10-109 MARKING INKS, PAINTS, AND COATINGS
BMS10-110 INTERIOR DECORATIVE HEAT CURED POWDER COATING
BMS10-112 INORGANIC THERMAL CONTROL COATING
BMS10-115 PRESS-ON WALKWAY FILM FOR FLOOR PANELS
BMS10-117 FLAME RETARDANT COATING FOR INTERIORS
BMS10-123 NON-CHROMATED INTEGRAL FUEL TANK COATING FOR COMPOSITE, TITANIUM AND CRES SURFACES
BMS11-1 CLEANER, ALKALINE (PHOSPHO-SILICATE)
BMS11-4 CLEANER, EMULSION TYPE (CONCENTRATE)
BMS11-5 CLEANING SOLVENT, TWO STAGE
BMS11-6 TRICHLOROETHYLENE
BMS11-7 CLEANING SOLVENT, PRE-SEALING
BMS11-8 EMULSION CLEANER, SOLVENT-ALKALINE TYPE
BMS11-9 METHYL PROPYL KETONE
BMS11-10 STABILIZED LIMONENE CLEANER
BMS11-11 N-PROPYL BROMIDE (NPB) SOLVENT
BMS13-1 WIRE, ELECTRIC, INSULATED, COPPER 300-VOLT, 257°F CONDUCTOR TEMP.
BMS13-2 CABLE, ELECTRIC-HIGH TEMPERATURE - 125 C
BMS13-3 WIRE: ELECTRICAL, INSULATED, COPPER, 600-VOLTS, ELECTRICAL CIRCUITS
BMS13-4 WIRE, ELECTRIC, INSULATED, COPPER_ FUEL GAGE CIRCUITS
BMS13-5 WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLT, 212 F, CONDUCTOR TEMPERATURE
BMS13-6 CABLE: ELECTRIC, INSULATED, 600 VOLTS
BMS13-7 WIRE, ELECTRIC, INSULATED, ALUMINUM, 600-VOLT
BMS13-8 WIRE: ELECTRIC, INSULATED HIGH TEMPERATURE (650 F) AND FIRE RESISTANT
BMS13-9 WIRE: ELECTRICAL POLYMONOCHLOROTRIFLUOROETHYLENE INSULATED
BMS13-10 WIRE, ELECTRIC, INSULATED, HIGH TEMPERATURE
BMS13-11 WIRE, ELECTRIC, INSULATED INSTRUMENTATION
BMS13-12 WIRE, ELECTRICAL, INSULATED, COPPER, 600-Volt (RMS), 212°F CONDUCTOR TEMPERATURE, SKYDROL - 500A RESISTANT
BMS13-13 WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLTS, 212 CONDUCTOR TEMPERATURE, ELECTRONIC CIRCUITS
BMS13-14 CABLE, ELECTRIC, MULIT-CONDUCTOR, 600-VOLT, 100°C
BMS13-16 WIRE, ELECTRIC, POLYTETRAFLUOROETHYLENE INSULATED, SURFACE TREATED
BMS13-18 WIRE, ELECTRIC, INSULATED, COPPER, HI-TEMPERATURE, 400F, 600 VOLTS (RMS)
BMS13-19 CABLE: COAXIAL, SEMI-FLEXIBLE
BMS13-21 CABLE: RADIO-FREQUENCY, COAXIAL
BMS13-23 WIRE AND CALBE, THERMOCOUPLE, ISA TYPE K, POLYTETRAFLUOROETHYLENE INSULATED
BMS13-24 WIRE AND CABLE, ELECTRICAL INSTRUMENTATION, FLUOROCARBON INSULATED, COPPER AND THERMOCOUPLE
BMS13-28 WIRE, ELECTRIC, ABRASION RESISTANT, ECTRUDED TFE, 600 VOLT (RMS, 500 DEGREES F) NICKEL PLATED COPPER CONDUCTOR
BMS13-29 EXTRUDED WIRE ELECTRIC, (TFE) INSULATED, 1500 VOLT (RMS) 500F CONDUCTOR TEMPERATURE
BMS13-30 WIRE, ELECTRIC, INSULATED, HIGH STRENGTH CONDUCTOR, 600 VOLTS 212 DEGREES F (100 DEGREES C) MAXIMUM CONDUCTOR TEMPERATURE
BMS13-31 WIRE, ELECTRIC, ABRASION RESISTANT, EXTRUDED TFE, 600 VOLT (RMS) 260C, NICKEL COATED COPPER CONDUCTOR
BMS13-35 WIRE ELECTRIC POLYIMIDE INSULATED, ALUMINUM 600 VOLTS 177C
BMS13-36 WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER, 600 VOLT, 400 DEG. F.
BMS13-37 WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER ALLOY 600 VOLT, 400 DEG. F
BMS13-38 WIRE, ELECTRIC, GENERAL PURPOSE, INSULATED COPPER, 600 VOLTS (RMS), 135C
BMS13-39 WIRE, ELECTRIC, INSULATED COPPER, 600 VOLTS (RMS), 135C
BMS13-40 WIRE ELECTRIC, INSULATED ALUMINUM, 600 VOLT (RMS), 150C
BMS13-41 ELECTRICALLY CONDUCTIVE TAPE
BMS13-42 WIRE: ELECTRIC, POLYARYLENE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150 C (302 F)
BMS13-45 ELECTRICALLY CONDUCTIVE GASKETS
BMS13-46 WIRE, ELECTRIC, INSULATED, WRAPPED WIRE TERMINATION
BMS13-47 TAPE, LABEL STOCK, WIRE AND BUNDLE IDENTIFICATION
BMS13-48 WIRE, ELECTRIC, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROETHYLENE, (ETFE) 600 V (RMS) 150 C
BMS13-49 WIRE: ELECTRIC, ALKANE-IMIDE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150C (302F)
BMS13-51 WIRE ELECTRIC POLYIMIDE INSULATED COPPER, AND COPPER ALLOY, 600 VOLT, 150 AND 200C
BMS13-52 SLEEVING, EXPANDABLE, BRAIDED
BMS13-53 MARKING FOIL, HOT STAMP
BMS13-54 LACING TAPE, FLAT BRAID
BMS13-55 WIRE, ELECTRIC, INSULATED THIN WALL FIRE RESISTANT, HIGH TEMPERATURE (260C)
BMS13-56 CABLE, ELECTRIC, COPPER AND COPPER ALLOY, FLAT - CONDUCTOR, 450 VOLT (RMS), 150C
BMS13-58 WIRE ELECTRIC, 600 VOLTS RMS, 260C, NICKEL COATED COPPER CONDUCTOR
BMS13-59 FIBER OPTIC CABLE
BMS13-60 WIRE ELECTRIC, ARC RESISTANT, 600 VOLTS RMS, ANNEALED COPPER, COPPER ALLOY AND ALUMINUM CONDUCTOR
BMS13-65 SILVER COATED CONDUCTOR, PTFE DIELECTRIC, DOUBLE BRAID, LIGHT WEIGHT, 50 OHMS, COAXIAL CABLE
BMS13-67 CABLE, ELECTRIC, INSULATED FIRE RESISTANT, HIGH TEMPERATURE (310C)
BMS13-69 HEAT SHRINKABLE IDENTIFICATION SLEEVES
BMS13-71 CABLE, FIBER OPTIC, MULTIMODE, GRADED INDEX
BMS13-72 CABLE, DATABUS, 100 OHMS
BMS14-2 DIELECTRIC MATERIAL, HIGH TEMPERATURE
BMS14-3 ZIRCONIUM OXIDE
BMS14-4 PROTECTIVE COATING, INORGANIC, HEAT, WEATHER AND OIL RESISTANT
BMS14-7 REFACTORY DIELECTRIC CASTABLE AND FINISHING MATERIAL
BMS15-3 RELEASE SHEET MATERIALS - NON-CONTAMINATION
BMS15-5 WIPER, ABSORBENT, PROCESS CLEANING
BMS15-6 COMPUTER MAGNETIC TAPE
BMS15-12 ALKALINE REMOVABLE TEMPORARY PROTECTIVE COATINGS AND COATING REMOVERS
BMS15-13 VACUUM BAGGING MATERIALS
BMS15-15 ELECTROSTATIC DISCHARGE PROTECTIVE BAGS AND FILM
BMS20-1 GENERAL REQUIREMENTS FOR ALUMINUM ALLOY EXTRUSIONS
BMS20-2 GENERAL REQUIREMENTS FOR ALUMINUM ALLOY SHEET AND PLATE
STB3-13 HYDRAULIC FLUID, LOW TEMPERATURE, RUST PREVENTATIVE
STB5-82 RUBBER, ABLATIVE SILICONE
STB7-236 ALUMINUM FILLER METAL, BARE
STB7-237 STEEL BAR, FORGING STOCK, AND RINGS, CORROSION RESISTANT, 15Cr-5Ni-4Cu, VACUUM ARC REMELTED
STB8-140 CASTING RESIN MICROWAVE ENERGY ABSORBING
STB8-152 LAMINATED, COPPER CLAD POLYTETRAFLUOROETHYLENE GLASS
STB8-153 ELASTOMER - MICROWAVE ENERGY ABSORBING SILICONE CASTING RESIN
STB8-188 STRIPPABLE, FLEXIBLE, ELECTRICAL TERMINAL COATING COMPOUND
STB10-7 PRIMER, HIGH TEMPERATURE, MOISTURE RESISTANT
STB10-84 COATING SYSTEM, RAIN EROSION & RADIATION THERMAL RESISTANT

Back to Misc Page