Scribd
Upload
56 views1 page

WF Base Plate Design Based On AISC Manual 13th Edition (AISC 360-05)

This document provides input data and design calculations for a base plate for a column supporting an axial load of 14.3 kips. The base plate is 14 inches by 10 inches and 3/8 inches thick. Calculations are shown to check the bearing pressure and determine the required base plate thickness according to specifications in the AISC Manual 13th Edition. The bearing pressure is determined to be satisfactory and the required base plate thickness is calculated to be 0.27 inches.

Uploaded by

Ingeniero mecanico F.N.I.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views1 page

WF Base Plate Design Based On AISC Manual 13th Edition (AISC 360-05)

This document provides input data and design calculations for a base plate for a column supporting an axial load of 14.3 kips. The base plate is 14 inches by 10 inches and 3/8 inches thick. Calculations are shown to check the bearing pressure and determine the required base plate thickness according to specifications in the AISC Manual 13th Edition. The bearing pressure is determined to be satisfactory and the required base plate thickness is calculated to be 0.27 inches.

Uploaded by

Ingeniero mecanico F.N.I.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PROJECT : 441.

DU02 PAGE : 1
CLIENT : Sociedad Boliviana de Cemento S.A. DESIGN BY : JDMB
JOB NO. : BOLIVIA DATE : 25/08/2009 REVIEW BY :
WF Base Plate Design Based on AISC Manual 13th Edition (AISC 360-05)

INPUT DATA & DESIGN SUMMARY


AXIAL LOAD OF COMPRESSION Pa = 14.3 kips, ASD 6 ton.
STEEL PLATE YIELD STRESS Fy = 35 ksi
CONCRETE STRENGTH fc' = 3 ksi
COLUMN SIZE => W10X26
BASE PLATE SIZE N = 14.0 in 356 mm.
B = 10.0 in 254 mm.
AREA OF CONCRETE SUPPORT A2 = 140 in2
(geometrically similar to and concentric with the loaded area.)

USE
14.0 x 10.0 ≈ 360 X 250 mm.
3/8 in thick plate
4 ANCLAJES 5/8

ANALYSIS
CHECK BEARING PRESSURE (AISC 360-05 J8)

f 'c A1    
P p / Ωc = MIN 0.85MAX  A2 , 1 , 1.7  = 142.80 kips > Pa
Ωc   A1  
Where A1 = 140 in2, actual area of base plate. [Satisfactory]
Ωc = 2.50 ASD pag.115

DETERMINE VALUES OF m, n, n', X , and λ (AISC 13th Page 14-5)


m = 0.5 (N - 0.95 d) = 2.11 in
n = 0.5 (B - 0.8 b f ) = 2.69 in
0.5
n' = 0.25 (d b f ) = 1.93 in
 
4d b f  Ω c P a
X = MIN  , 1 = 0.09
 
 (
d + b f )  P p
2


 2 X 
λ = MIN  , 1 = 0.31
+ 1− X
 116 
Where d = 10.30 in, depth of column section.
bf = 5.77 in, flange width of column section.

DETERMINE REQUIRED THICKNESS OF BASE PLATE (AISC 13th Page 14-6)

0.27 in

Where l = MAX ( m, n, λ n' ) = 2.69 in

You might also like