Scribd
Upload
52 views2 pages

PR1P Position and Distance Measurement 02 2016 en 345958

This document summarizes a profile-style transducer with a digital pulse interface that provides precise linear measurement for machine positioning. Key features include 1 micrometer resolution, sampling rates up to 4 kHz, strokes up to 7620mm, IP67 protection rating, and compatibility with most controller interfaces. The transducer uses non-contact position encoders to measure axis positions through the aluminum profile housing with up to 15mm of offset tolerance.

Uploaded by

Sathish J Ece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
52 views2 pages

PR1P Position and Distance Measurement 02 2016 en 345958

This document summarizes a profile-style transducer with a digital pulse interface that provides precise linear measurement for machine positioning. Key features include 1 micrometer resolution, sampling rates up to 4 kHz, strokes up to 7620mm, IP67 protection rating, and compatibility with most controller interfaces. The transducer uses non-contact position encoders to measure axis positions through the aluminum profile housing with up to 15mm of offset tolerance.

Uploaded by

Sathish J Ece
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Economical and easy to integrate linear measurement

PROFILE-STYLE TRANSDUCER
WITH DIGITAL DPI/IP INTERFACE
Micropulse position measurement systems Features
in a profile housing are non-contact,
absolute measurement systems for ■ ■ High-accuracy machine positioning
accurately measuring one or more with synchronous data transmission
measurement paths. The digital DPI/IP and 1μm resolution
pulse interface is compatible with ■ ■ Fast, dynamic measuring with

controllers from most manufacturers up to 4 kHz sampling rate


and ensures reliable signal transmission. ■ ■ Stroke lengths up to 7620 mm

These transducers feature rugged ■ ■ Non-contact and wear-free, insensitive

construction with a high protection rating, to contamination


simple installation and a wear-free, highly ■ ■ Time-saving installation and startup

precise measuring principle. The current


axis positions are marked by the position
encoder magnets through the wall of the
aluminum profile. The transducer systems
tolerate a vertical and lateral offset of up to
15 mm. In presses and stamping machines
the transducer system measures the axis
position of load and mold movement.
PROFILE-STYLE TRANSDUCER
WITH DIGITAL DPI/IP INTERFACE

BTL7-P511 PROFIL
Interface Digital Pulse Interface (DPI), Integrated Protocol (IP)
Stroke length max. 7620 mm
Repeat accuracy ≤ ±5 µm, (typ. ±2,5 μm)
Sampling rate max. 4280 Hz
Max. number of position encoders 16
Supply voltage 10…30 V DC
Ambient temperature –40...+85 ºC
Sock 150 g
Vibration 20 g
Enclosure rating per IEC 60529 IP67, IP68 for cable version
Housing material Aluminium
Connection Cable, connectors: M12 – 8-pin, M16 – 8-pin
Dimensions 35 × 36,8 × 145 mm + stroke length

Ordering example:

B T L 7 - P 5 1 1 - M _ _ _ _- P - _ _ _ _

Standard
nominal strokes (mm) Connection
50...7620 mm in S32 Connectors
1-mm-increments S115 Connectors
KA02 PUR cable 2 m
KA05 PUR cable 5 m
KA10 PUR cable 10 m
KA15 PUR cable 15 m

ACCESSORIES

BAM014H BAM014Z BAM014H


Type Position encoder, floating Position encoder, floating Position encoder, captive
Distance 0.1...4 mm Distance 4...8 mm with push rod

CONNECTORS

BCC00YF BCC00YW BCC0103 BCC010F


Type M12 female, 8-pin M12 female, 8-pin (right- M16 female, 8-pin M16 female, 8-pin (right-
(straight) with 5 m cable angle) with 5 m cable (straight) with 5 m cable angle) with 5 m cable
PUR (black) PUR (black) PUR (black) PUR (black)

www.balluff.com
Balluff GmbH · Schurwaldstrasse 9 · 73765 Neuhausen a. d. F. · Germany · Phone +49 7158 173-0 · Fax +49 7158 5010 · [email protected]

PR1P_Position_and_distance_measurement_BTL7 · EN · B16 · Subject to modification.

You might also like