Scribd
Upload
37 views5 pages

GSM Antenna Rotation

This document contains calculations for the roll, yaw, and pitch of a mast structure under different load cases. Load cases include deflection data for 4 nodes at different elevations on the mast. The average deflection values are used to calculate the roll, yaw, and pitch in degrees according to industry standards. Roll is rotation about the longitudinal axis, yaw about the vertical axis, and pitch about the transverse axis.

Uploaded by

mrprabhu16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
37 views5 pages

GSM Antenna Rotation

This document contains calculations for the roll, yaw, and pitch of a mast structure under different load cases. Load cases include deflection data for 4 nodes at different elevations on the mast. The average deflection values are used to calculate the roll, yaw, and pitch in degrees according to industry standards. Roll is rotation about the longitudinal axis, yaw about the vertical axis, and pitch about the transverse axis.

Uploaded by

mrprabhu16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 5

Rotation (30.

3m)

CALCULATION FOR ROTATION


(as per TIA / EIA 222-F Standard)
Degrees
DEFLECTION
Mast
Av. Deflection of central point in cm Roll = Yaw = Pitch =
Load case Node elevation in
X Y Z ATAN(Dy / Dx) ATAN(Dz/ Dx) ATAN( Dy / Dz)
m Dx Dy Dz
73 32.008 0.850 -0.090
74 32.080 -1.353 -0.011
9
75 32.088 -1.353 -0.012
76 32.096 0.849 -0.019 6000.00 32.068 -0.252 -0.033 -0.450 -0.059 82.532
73 24.260 1.409 -24.258
74 24.248 -0.239 -24.218
10
75 24.222 -1.893 -24.220
76 24.221 -0.239 -24.246 6000.00 24.238 -0.241 -24.236 -0.569 -44.997 0.569
73 0.002 0.053 -23.884
74 0.002 0.529 -23.884
11
75 0.003 -1.040 -23.887
76 0.002 -1.040 -23.877 6000.00 0.002 -0.375 -23.883 -89.656 -89.995 0.898
73 -20.328 -0.245 -20.301
74 -20.339 1.104 -20.338
12
75 -20.302 -0.245 -20.326
76 -20.304 -1.588 -20.302 6000.00 -20.318 -0.244 -20.317 0.687 44.998 0.687
73 -29.336 -1.249 0.001
74 -29.344 0.742 0.000
13
75 -29.344 0.742 0.000
76 -29.336 -1.249 0.000 6000.00 -29.340 -0.254 0.000 0.495 0.000 -89.943
73 -20.304 -1.588 20.302
74 -20.303 -0.245 20.327
14
75 -20.340 1.104 20.338
76 -20.329 -0.245 20.301 6000.00 -20.319 -0.244 20.317 0.687 -44.997 -0.687
73 0.003 -1.040 23.877
74 0.004 -1.040 23.877
15
75 0.003 0.529 23.884
76 0.003 0.529 23.884 6000.00 0.003 -0.256 23.881 -89.271 89.992 -0.613
73 24.220 -0.239 24.245
74 24.222 -1.893 24.219
16
75 24.248 -0.239 24.218
76 24.259 1.409 24.257 6000.00 24.237 -0.241 24.235 -0.569 44.997 -0.569

Note: Roll: Rotation about longitudinal axis


Pitch: Rotation about transeverse axis
Yaw: Rotation about vertical axis

Page 1
Rotation (30.3m) (2)

CALCULATION FOR ROTATION


(as per TIA / EIA 222-F Standard)
Degrees
DEFLECTION
Mast Yaw =
Av. Deflection of central point in cm Roll =
Load case Node elevation in ATAN(Dz/
X Y Z ATAN(Dy / Dx)
m Dx Dy Dz Dx)
61 27.097 0.825 -0.021
62 27.098 -1.317 -0.006
9
63 27.106 -1.318 -0.014
64 27.105 0.825 -0.014 5550.00 27.102 -0.246 -0.014 -0.521 -0.029
61 20.527 1.367 -20.526
62 20.523 -0.238 -20.479
10
63 20.487 -1.838 -20.485
64 20.481 -0.237 -20.521 5550.00 20.505 -0.237 -20.503 -0.661 -44.998
61 0.004 0.51 -20.339
62 0.004 0.51 -20.339
11
63 0.005 -1.005 -20.336
64 -0.001 -1.004 -20.336 5550.00 0.003 -0.247 -20.338 -89.305 -89.992
61 -17.287 -0.237 -17.261
62 -17.295 1.067 -17.294
12
63 -17.262 -0.236 -17.286
64 -17.267 -1.54 -17.266 5550.00 -17.278 -0.237 -17.277 0.784 44.998
61 -24.837 -1.213 0.004
62 -24.837 0.719 -0.003
13
63 -24.838 0.719 0.003
64 -24.837 -1.213 -0.003 5550.00 -24.837 -0.247 0.000 0.570 -0.001
61 -17.267 -1.54 17.266
62 -17.262 -0.236 17.286
14
63 -17.295 1.067 17.294
64 -17.288 -0.237 17.261 5550.00 -17.278 -0.237 17.277 0.784 -44.998
61 0.004 -1.004 20.336
62 0.006 -1.005 20.336
15
63 0.001 0.51 20.339
64 0.005 0.511 20.339 5550.00 0.004 -0.247 20.338 -89.072 89.989
61 20.481 -0.237 20.521
62 20.487 -1.838 20.485
16
63 20.522 -0.238 20.479
64 20.527 1.367 20.525 5550.00 20.504 -0.237 20.503 -0.661 44.998

Note: Roll: Rotation about longitudinal axis


Pitch: Rotation about transeverse axis
Yaw: Rotation about vertical axis

Page 2
Rotation (30.3m) (2)

Degrees

Pitch =
ATAN( Dy / Dz)

86.804

0.661

0.697

0.784

-89.942

-0.784

-0.696

-0.661

Page 3
Rotation (41.3m)

CALCULATION FOR ROTATION


(as per TIA / EIA 222-F Standard)
Degrees
DEFLECTION
Mast
Av. Deflection of central point in cm Roll = Yaw = Pitch =
Load case Node elevation in
X Y Z ATAN(Dy / Dx) ATAN(Dz/ Dx) ATAN( Dy / Dz)
m Dx Dy Dz
61 48.96 1.7 -0.007
62 48.962 -2.161 0.007
1
63 48.962 -2.161 -0.007
64 48.96 1.7 0.006 5550.00 48.961 -0.231 0.000 -0.270 0.000 89.938
61 37.181 2.687 -37.178
62 37.172 -0.212 -37.094
2
63 37.107 -3.104 -37.104
64 37.097 -0.212 -37.169 5550.00 37.139 -0.210 -37.136 -0.324 -44.998 0.324
61 0.006 1.118 -36.414
62 -0.001 1.118 -36.414
3
63 0.008 -1.578 -36.407
64 -0.002 -1.578 -36.407 5550.00 0.003 -0.230 -36.411 -89.315 -89.996 0.362
61 -30.737 -0.21 -30.692
62 -30.752 2.09 -30.75
4
63 -30.695 -0.21 -30.734
64 -30.703 -2.511 -30.701 5550.00 -30.722 -0.210 -30.719 0.392 44.998 0.392
61 -44.784 -1.967 0.007
62 -44.786 1.507 -0.005
5
63 -44.786 1.507 0.006
64 -44.784 -1.967 -0.006 5550.00 -44.785 -0.230 0.001 0.294 -0.001 -89.875
61 -30.703 -2.511 30.701
62 -30.695 -0.21 30.734
6
63 -30.753 2.09 30.75
64 -30.737 -0.21 30.693 5550.00 -30.722 -0.210 30.720 0.392 -44.998 -0.392
61 -0.001 -1.457 34.058
62 0.007 -1.457 34.058
7
63 -0.001 0.997 34.065
64 0.006 0.998 34.065 5550.00 0.003 -0.230 34.062 -89.314 89.995 -0.386
61 37.097 -0.212 37.168
62 37.107 -3.104 37.103
8
63 37.171 -0.212 37.093
64 37.181 2.687 37.178 5550.00 37.139 -0.210 37.136 -0.324 44.997 -0.324

Note: Roll: Rotation about longitudinal axis


Pitch: Rotation about transeverse axis
Yaw: Rotation about vertical axis

Page 4
Rotation (41.3m) (2)

CALCULATION FOR ROTATION


(as per TIA / EIA 222-F Standard)
Degrees
DEFLECTION
Mast
Av. Deflection of central point in cm Roll = Yaw = Pitch =
Load case Node elevation in
X Y Z ATAN(Dy / Dx) ATAN(Dz/ Dx) ATAN( Dy / Dz)
m Dx Dy Dz
73 57.950 1.751 -0.001
74 57.936 -2.216 0.001
1
75 57.936 -2.216 -0.002
76 57.950 1.751 0 6000.00 57.943 -0.233 -0.001 -0.230 0.000 89.877
73 43.920 2.769 -43.916
74 43.898 -0.208 -43.845
2
75 43.852 -3.194 -43.848
76 43.850 -0.207 -43.895 6000.00 43.880 -0.210 -43.876 -0.274 -44.997 0.274
73 0.003 1.158 -42.721
74 0.003 1.158 -42.721
3
75 0.004 -1.634 -42.708
76 0.002 -1.634 -42.709 6000.00 0.003 -0.238 -42.715 -89.278 -89.996 0.319
73 -36.102 -0.219 -36.053
74 -36.122 2.162 -36.119
4
75 -36.056 -0.218 -36.099
76 -36.059 -2.588 -36.056 6000.00 -36.085 -0.216 -36.082 0.343 44.998 0.343
73 -52.869 -2.023 0.002
74 -52.883 1.554 0
13
75 -52.883 1.554 0.001
76 -52.869 -2.023 -0.001 6000.00 -52.876 -0.235 0.001 0.254 -0.001 -89.878
73 -36.059 -2.588 36.056
74 -36.057 -0.218 36.099
14
75 -36.123 2.162 36.119
76 -36.103 -0.219 36.054 6000.00 -36.086 -0.216 36.082 0.343 -44.997 -0.343
73 0.002 -1.504 39.774
74 0.004 -1.504 39.773
15
75 0.003 1.028 39.784
76 0.003 1.028 39.784 6000.00 0.003 -0.238 39.779 -89.278 89.996 -0.343
73 43.849 -0.207 43.894
74 43.852 -3.194 43.847
16
75 43.898 -0.208 43.845
76 43.919 2.769 43.915 6000.00 43.880 -0.210 43.875 -0.274 44.997 -0.274

Note: Roll: Rotation about longitudinal axis


Pitch: Rotation about transeverse axis
Yaw: Rotation about vertical axis

Page 5

You might also like