See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/292695529

Demolition of Buildings--An Overview

Article · January 2014

CITATIONS READS

2 5,819

2 authors, including:

Pravin Khandve
PROF RAM MEGHE COLLEGE OF ENGINEERING AND MANAGEMENT, BADNERA - AMRAVATI
23 PUBLICATIONS   53 CITATIONS   

SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Internal Quality Assurance Cell Project for Civil Engineering Department View project

Solid Waste Management Research Project View project

All content following this page was uploaded by Pravin Khandve on 03 February 2016.

The user has requested enhancement of the downloaded file.

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

Demolition of Buildings – An Overview

Shweta O. Rathi1, P.V. Khandve2
1
Department of Civil Engineering, Prof Ram Meghe College of Engineering and Management, Badnera
Amravati (M.S.), [email protected]
2
Assistant Professor, Department of Civil Engineering, Prof Ram Meghe College of Engineering and
Management, Badnera, Amravati (M.S.), [email protected]

Abstract - We know that every structure is designed for a specific life period, generally 100 years.
The existence of the structure after the service life period is very dangerous to its occupants and
surrounding buildings. Therefore it becomes essential to demolish the building. Demolition is the
tearing-down of buildings which involves taking a building apart while preserving the valuable
elements for re-use. There are various methods of demolition. The building is brought down either
manually or mechanically depending upon the method used for demolition of buildings. Equipments
used for demolition work are hammers, rammers, excavators, bulldozers, wrecking ball and the
explosives used are dynamites and detonators etc which is generally preferred for tall buildings. The
various steps involved before the demolition process includes surveying of the demolition site,
removal of hazardous material and safety precautionary measures. The study also includes the
precautionary measures regarding machinery or equipments, scaffolding, public safety and worker
safety. Various strategies of demolition waste have been reported in literature for implementing good
practices for demolition of buildings.
Keywords – Demolition, dismantling, building, collapse, precautions.

I. INTRODUCTION
Demolition is the process of destroying down or dismantling or collapsing down of large
buildings after its useful life period. The process of demolition is carried out with the help of some
equipment or other methods with legal procedure followed by the consent of the local authority. We
know that every structure is designed for a specific life period generally 100 years. The existence of
the structure after the service life period is over is very dangerous to its occupants and surrounding
buildings. The purpose of demolition is to prevent the accidental collapse of any part of the building
and to ensure safety of workers, public and neighboring properties.
Prior to carrying out any building demolition, detailed building appraisal by means of surveys
and appropriate assessments shall be required which shall include a building survey and a structure
survey. Increased concern for environmental protection has led governments to introduce legislation
to encourage the use of construction demolished waste after recycling it. Demolition sites are the
sources of large amounts of solid waste, which today is being used as mere landfill. On the other
hand, building practices are such that reusable materials also become mixed with rubble, stone and
soil, reducing their value and making recycling difficult or uneconomical . A building waste recycling
as aggregates is a modern approach for preventing environmental pollution through reducing the
stocks of waste. The reuse of building waste is a relatively new issue for the world despite the
existing considerable quantity of building waste. Demolition work is one of the most important
operations in construction engineering field. If demolition activity is not done carefully it may result
into severe consequences. The various causes of consequences of demolition of buildings are as
follows -
i. Injury to human workers due to the difficulty of accessing into or working inside a
building which is under demolition.
ii. Falling of smaller objects or debris from the demolishing building.

@IJAERD-2014, All rights Reserved 1

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

iii. Falling of partially demolished structure.

iv. Collapse of unstable structure due to original structure being disturbed.
v. Employing inappropriate methods to demolish.
vi. Collapse of heavy demolition equipment due to inadequate support of the partially
demolished structure.
vii. Collapse of the partially demolished structure due to the accommodation of large amount
of unclear debris.
viii. Congested site environment that easily cause damages to human workers or to the third
parties that are situated nearby the demo1ition site.
ix. Difficult access for workers entering into a building under demolition
x. Heavy machinery used in demolition may have risk of collapse due to insufficient
support.
To avoid these consequences from demolition work, it is necessary to understand complete
process of demolition of building.

II. DEMOLITION OF BUILDINGS

Demolition is the tearing-down of buildings and other structures. Demolition contrasts with
deconstruction, which involves taking a building apart while carefully preserving valuable elements
for re-use. Demolition methods can vary depending on the area where it will be held on, time
available, the building material, the purpose of the demolition and the way that debris is going to be
disposed. Times saving methods are more expensive than the slower ones.

2.1. Pre-planning of demolition activity

The different steps before the start of a demolition process are -
2.1.1. Surveying of Site
Study of different parameters with different views of the structure and its surroundings with
structural point of view is carried in surveying. The two types of surveying which are mainly
conducted are building surveying and structural surveying.

2.2.2. Removal of hazardous materials

Before starting demolition of building hazardous materials if any, such as asbestos containing
materials, petroleum contamination and radioactive contamination, etc exist in the building are
removed. Further investigation and removal of such hazardous material or contamination by experts
shall be done.

2.2.3. Preparation of plan for demolition work

Demolition Plan and strategy is prepared which includes the following -
a. The building location to be demolished.
b. Topography of the site with its ground level contours and sections of the slopes and ground
supported by the building where appropriate in detailed.
c. Details of ground removal and/or backfilling.

2.2.4. Required stability report

The Stability Report shall include the following parts -
a. A report on the stability of the building to be demolished during all stages of demolition.
b. In the case when powered mechanical plants or equipment are used, structural calculations for all
temporary supports and bracings.
c. A report on the stability of neighboring buildings, adjoining properties.

@IJAERD-2014, All rights Reserved 2

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

III. METHODS OF DEMOLITION

The demolition sequence will depend on things like the type of construction, location, and
demolition methods selected. Buildings and structures should generally be demolished in reverse
order to their construction, that is, by „sequential demolition‟. The different methods of demolition
are as below –

3.1. Demolition of building by Top Down- Manual Method

Manual methods are carried out top down, proceeding, in general, from the roof to ground. The
particular sequence of demolition may vary, depending on site conditions and structural elements to
be demolished.

3.1.1. Demolition of Cantilevered Structures and Balconies

Cantilevered structures, balconies and canopies may project out of the building over the
pedestrian footpath or in some cases over a portion of the traffic lane. Figure 1.Illustrates the
demolition of cantilevered slab. The general sequence of dismantling cantilevered slabs and beams
are described in the following –
i. The exterior wall shall be demolished first.
ii. Any structure or dead load supported by the cantilevered system shall be removed prior to
demolishing the cantilevered slabs and beams.
iii. The concrete shall be broken down gradually starting from the exterior edge of the
cantilevered floor, working inwards and toward its supporting beams.

Figure 1. Demolition of cantilevered RCC slab (Manual method)

@IJAERD-2014, All rights Reserved 3

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

3.1.2. Demolition of Floor Slabs

Reinforced concrete floor slab shall be demolished by gradually breaking away the concrete. The
reinforcement shall remain and be cut off after the concrete is broken away.

Figure 2. Demolition of slab

3.2. Demolition of building by Top Down- By Machines
The sequence of demolition by machine is typically the same as the top down manual method,
except that most of the demolition is done by mechanical plant. The demolition begins with the
lifting of the mechanical plant on to the building top floor. When rope or tie wire is used for pulling,
the workers shall be protected or stay away from the area within reach of the rope or tie wire. The
concrete shall be broken away first before the cutting of reinforcement. Alternatively the reinforced
concrete slab may be cut by saw cutting. Demolition sequence would be as shown in following
figures.

Figure 3. Demolition of Slabs and Beams

@IJAERD-2014, All rights Reserved 4

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

Figure 4. Continue Demolition of Slabs and Beams

Figure 5. An access ramp to allow machine to climb down to the next floor below

Figure 6. Demolition of interior column

@IJAERD-2014, All rights Reserved 5

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

3.3. Demolition of building by Wrecking Ball

The wrecking ball application consists of a crane equipped with a steel ball. The destruction of the
building is by the impact energy of the steel ball suspended from the crawler crane. Recommended
techniques for the wrecking ball operations include
i. Vertical Drop - free falling of the wrecking ball onto the structure and
ii. Swing in line - swinging of the ball in-line with the jib.
Figure 7 illustrates the operation through Wrecking Ball.

Figure 7. Operation using Wrecking Ball

3.4. Demolition of building by implosion

Implosion is the strategic placing of explosive material and timing of its detonation so that a structure
collapses on itself in a matter of seconds, minimizing the physical damage to its immediate
surroundings. The technique weakens or removes critical supports so that the building can no longer
withstand the force of gravity and falls under its own weight. Implosion are discussed in the
following -
i. Pre-weakening of the structure shall be designed to ensure the structural stability before
the implosion.
ii. To minimize the dispersion of building debris into adjoining land after implosion, a
trench or bund wall shall be installed outside the building to contain the debris, unless a
basement exists.
iii. A good design will cause the structure to fall towards the centre of the building and/or
within the protected area.

@IJAERD-2014, All rights Reserved 6

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

iv. A good design will provide adequate and sufficient time delay to allow only one or two
floors of the building debris to fall on ground level at a time in order to limit the
magnitude of the impact on the ground.
v. The design must also identify an exclusion zone to evacuate all residents or inhabitants
during the implosion.
vi. The structural safety of the building to be imploded shall be checked and certified to be
sound and safe at all stages prior to implosion.

IV. PROTECTIVE PRECAUTIONS FOR DEMOLITION

Safety precautions must be taken to safeguard persons working on the site and members of the
public who are in the vicinity, as well as to protect property likely to be affected by the demolition.

4.1. Precautions regarding Machinery / Equipment

The following precautions should be taken regarding machinery/ equipment -
i. All dismantling equipment should be operated by competent persons with appropriate
training.
ii. These equipment should be used and maintained as recommended by the equipment‟s
manufacturer or supplier.
iii. Lifting equipment should be thoroughly examined by an authorized examiner at least
once every 12 months for those lifting goods or materials or once every 6 months for
those lifting personnel.

4.2. Precautions regarding Scaffolding

The following precautions should be taken regarding scaffolding -
i. Scaffolds above 4m in height (excluding tower and trestle scaffolds) should be erected,
installed, added, altered or dismantled by an approved scaffold contractor.
ii. Working platforms should be free from debris.
iii. Every scaffold should have at least one designated access point.
iv. Care should be taken to prevent damage to scaffolding components from falling debris.

4.3. Precautions regarding Public Safety

The following precautions should be taken regarding public safety -
i. The demolition site should be properly barricaded with appropriate warning signs posted.
ii. No unauthorized entry should be permitted in the demolition site.
iii. Catch platforms should be provided where exterior walls or roofs are being demolished.
iv. Movement of machinery from floor to floor should be considered in the demolition
procedures.
v. The use of dismantled debris to form access ramps for machinery may lead to overloading
of floors.

4.4. Precautions regarding Worker Safety

The following precautions should be taken regarding worker safety -
i. Workers involved in demolition works must be provided with appropriate training and
instructions to carry out demolition works safely.
ii. Supervision is needed to ensure that only those workers who have received training and
instructions are authorized to carry out the work.
iii. All personnel assessing the demolition site must be provided with safety boots and
helmets.

@IJAERD-2014, All rights Reserved 7

 International Journal of Advance Engineering and Research Development (IJAERD)
Volume 1,Issue 6,June 2014, e-ISSN: 2348 - 4470 , print-ISSN:2348-6406

iv. Workers should, when necessary, be provided with appropriate personal protective
equipment such as goggles, hearing protection devices, safety harness, gloves, protective
clothing, etc.
v. Appropriate respirators for dust or chemicals should also be provided.

V. PROBLEMS IN DEMOLITION OF BUILDINGS

The problems which may arise while carrying out the building demolition are as follows -
i. Accidents due to persons falling from high, unprotected workplaces and through
openings.
ii. Accidents due to persons being struck by falling objects.
iii. The building collapsing suddenly and unexpectedly may cause death of the workers.
iv. Insecure materials in or on the structure.
v. Exposure to dust, chemicals, and noise influence the occupational health.
Demolition of buildings involves various demolition activities which cause influence on the
environment which ultimately give rise to pollution.

VI. CONCLUSIONS
It is concluded that before carrying out any demolition works, building survey must be done
carefully, so that it may not cause any severe damage to the environment, public and adjacent
properties around the building which is to be demolished. Any type of building to be demolished, its
method depends upon various factors such as site condition, type of structures, age of building,
height of building and economy and most important its location with presence of its surrounding
with its structural stability. Controlled demolition of building is necessary to ensure safety of both
the workers and the surroundings so as to cause least amount of injuries and accidents. Explosive or
implosion demolition is the most preferred method for safely and efficiently demolishing the larger
structures which requires a very high precision. The procedure of demolishment should be carried
out with the aim of minimizing the risks of causing damage to persons and properties of the public,
endangering the health and safety of site personnel and damaging the neighborhood environment.

REFERENCES
[1] M.G.Bhandari, V.K.Kulkarni, R.K.Malviya, (2013), “ Building Demolition: Ground to Earth Important as
Construction”, International Journal of Emerging Technology and Advanced Engineering Website: www.ijetae.com
(ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 3, Issue 4, April 2013)
[2] Ch.F. Hendriks, Mrs G.M.T. Janssen (2001), “Construction and demolition waste: general process aspects”,
HERON, Vol. 46, No. 2 (2001) ISSN 0046-7316
[3] Asif Husain, and Majid Matouq Assas (2013), “Utilization of Demolished Concrete Waste for New Construction”,
World Academy of Science, Engineering and Technology, 73
[4] R. Kamala, B. Krishna Rao (2012),” Reuse of Solid Waste from Building Demolition for the Replacement of Natural
Aggregates”, International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-
2, Issue-1, October 2012
[5] “Technical Advisory for Demolition”, Published in March 2009 by the Workplace Safety and Health Council in
collaboration with the Ministry of Manpower, www.wshc.gov.sg
[6] Buildings Department (2004), “Code of practice for demolition of buildings” published by Buildings Department
[7] BUREAU OF INDIAN STANDARDS (2012), Draft NATIONAL BUILDING CODE OF INDIA 2005: PART 11
approach to sustainability
[8] Achuta Rao, “Report on Demolition of Structures”, SAG Refresher Course No. 12203
[9] K. Arya, A.K.Sharma, Arvind Kumar, N.K.Sharma, “Report on Demolition of Structures using Implosion
Technology”, SESSION NO 514 INTEGRATED COURSE IRICEN PUNE

@IJAERD-2014, All rights Reserved 8

View publication stats