Scribd
Upload
1K views

Metric Tap Size Chart: Tap Size Diameter (In) Diameter (MM) Thread Count (TPI) Thread Pitch (MM) Tap Drill Size

The document provides a chart listing various metric tap sizes with their corresponding diameters in both inches and millimeters, thread counts in threads per inch (TPI), thread pitches in millimeters, and recommended tap drill sizes. The chart includes tap sizes from M1x0.2 to M60x5.5 in increasing diameter sizes. Each tap size listing provides the standardized information to identify and use that particular metric tap.

Uploaded by

herrysugar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

Metric Tap Size Chart: Tap Size Diameter (In) Diameter (MM) Thread Count (TPI) Thread Pitch (MM) Tap Drill Size

The document provides a chart listing various metric tap sizes with their corresponding diameters in both inches and millimeters, thread counts in threads per inch (TPI), thread pitches in millimeters, and recommended tap drill sizes. The chart includes tap sizes from M1x0.2 to M60x5.5 in increasing diameter sizes. Each tap size listing provides the standardized information to identify and use that particular metric tap.

Uploaded by

herrysugar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Metric Tap Size Chart

Diameter Diameter Thread count Thread pitch Tap drill


Tap size
(in) (mm) (TPI) (mm) size

M1x0.2 0.0394 1.0000 ~127 0.200 0.8 mm


M1x0.25 0.0394 1.0000 ~102 0.250 0.75 mm
M1.1x0.25 0.0433 1.1000 ~102 0.250 0.85 mm
M1.1x0.2 0.0433 1.1000 ~127 0.200 0.9 mm
M1.2x0.2 0.0472 1.2000 ~127 0.200 1 mm
M1.2x0.25 0.0472 1.2000 ~102 0.250 0.95 mm
M1.4x0.2 0.0551 1.4000 ~127 0.200 1.2 mm
M1.4x0.3 0.0551 1.4000 ~85 0.300 1.1 mm
M1.6x0.2 0.0630 1.6000 ~127 0.200 1.4 mm
M1.6x0.35 0.0630 1.6000 ~73 0.350 1.25 mm
M1.8x0.2 0.0709 1.8000 ~127 0.200 1.6 mm
M1.8x0.35 0.0709 1.8000 ~73 0.350 1.45 mm
M2x0.25 0.0787 2.0000 ~102 0.250 1.75 mm
M2x0.4 0.0787 2.0000 ~64 0.400 1.6 mm
M2.2x0.25 0.0866 2.2000 ~102 0.250 1.95 mm
M2.2x0.45 0.0866 2.2000 ~57 0.450 1.75 mm
M2.5x0.35 0.0984 2.5000 ~73 0.350 2.1 mm
M2.5x0.45 0.0984 2.5000 ~57 0.450 2.05 mm
M3x0.35 0.1181 3.0000 ~73 0.350 2.6 mm
M3x0.5 0.1181 3.0000 ~51 0.500 2.5 mm
M3.5x0.35 0.1378 3.5000 ~73 0.350 3.1 mm
M3.5x0.6 0.1378 3.5000 ~43 0.600 2.9 mm
M4x0.35 0.1575 4.0000 ~73 0.350 3.6 mm
M4x0.5 0.1575 4.0000 ~51 0.500 3.5 mm
M4x0.7 0.1575 4.0000 ~37 0.700 3.3 mm
M4.5x0.5 0.1772 4.5000 ~51 0.500 4 mm
M4.5x0.75 0.1772 4.5000 ~34 0.750 3.8 mm
Diameter Diameter Thread count Thread pitch Tap drill
Tap size
(in) (mm) (TPI) (mm) size
M5x0.5 0.1969 5.0000 ~51 0.500 4.5 mm
M5x0.8 0.1969 5.0000 ~32 0.800 4.2 mm
M5.5x0.5 0.2165 5.5000 ~51 0.500 5 mm
M6x0.5 0.2362 6.0000 ~51 0.500 5.5 mm
M6x0.75 0.2362 6.0000 ~34 0.750 5.2 mm
M6x1 0.2362 6.0000 ~26 1.000 5 mm
M7x0.75 0.2756 7.0000 ~34 0.750 6.2 mm
M7x1 0.2756 7.0000 ~26 1.000 6 mm
M8x0.5 0.3150 8.0000 ~51 0.500 7.5 mm
M8x0.75 0.3150 8.0000 ~34 0.750 7.2 mm
M8x1 0.3150 8.0000 ~26 1.000 7 mm
M8x1.25 0.3150 8.0000 ~21 1.250 6.8 mm
M9x0.75 0.3543 9.0000 ~34 0.750 8.2 mm
M9x1 0.3543 9.0000 ~26 1.000 8 mm
M9x1.25 0.3543 9.0000 ~21 1.250 7.8 mm
M10x0.75 0.3937 10.0000 ~34 0.750 9.2 mm
M10x1.5 0.3937 10.0000 ~17 1.500 8.5 mm
M10x1.25 0.3937 10.0000 ~21 1.250 8.8 mm
M10x1 0.3937 10.0000 ~26 1.000 9 mm
M11x0.75 0.4331 11.0000 ~34 0.750 10.2 mm
M11x1 0.4331 11.0000 ~26 1.000 10 mm
M11x1.5 0.4331 11.0000 ~17 1.500 9.5 mm
M12x1.5 0.4724 12.0000 ~17 1.500 10.5 mm
M12x1.75 0.4724 12.0000 ~15 1.750 10.2 mm
M12x0.75 0.4724 12.0000 ~34 0.750 11.25 mm
M12x1 0.4724 12.0000 ~26 1.000 11 mm
M12x1.25 0.4724 12.0000 ~21 1.250 10.8 mm
M14x1.5 0.5512 14.0000 ~17 1.500 12.5 mm
M14x1.25 0.5512 14.0000 ~21 1.250 12.8 mm
M14x1 0.5512 14.0000 ~26 1.000 13 mm
Diameter Diameter Thread count Thread pitch Tap drill
Tap size
(in) (mm) (TPI) (mm) size
M14x2 0.5512 14.0000 ~13 2.000 12 mm
M15x1 0.5906 15.0000 ~26 1.000 14 mm
M15x1.5 0.5906 15.0000 ~17 1.500 13.5 mm
M16x2 0.6299 16.0000 ~13 2.000 14 mm
M16x1.5 0.6299 16.0000 ~17 1.500 14.5 mm
M16x1 0.6299 16.0000 ~26 1.000 15 mm
M17x1 0.6693 17.0000 ~26 1.000 16 mm
M17x1.5 0.6693 17.0000 ~17 1.500 15.5 mm
M18x2.5 0.7087 18.0000 ~11 2.500 15.5 mm
M18x1 0.7087 18.0000 ~26 1.000 17 mm
M18x1.5 0.7087 18.0000 ~17 1.500 16.5 mm
M18x2 0.7087 18.0000 ~13 2.000 16 mm
M20x2 0.7874 20.0000 ~13 2.000 18 mm
M20x1.5 0.7874 20.0000 ~17 1.500 18.5 mm
M20x1 0.7874 20.0000 ~26 1.000 19 mm
M20x2.5 0.7874 20.0000 ~11 2.500 17.5 mm
M22x2 0.8661 22.0000 ~13 2.000 20 mm
M22x1.5 0.8661 22.0000 ~17 1.500 20.5 mm
M22x1 0.8661 22.0000 ~26 1.000 21 mm
M22x2.5 0.8661 22.0000 ~11 2.500 19.5 mm
M24x3 0.9449 24.0000 ~9 3.000 21 mm
M24x1 0.9449 24.0000 ~26 1.000 23 mm
M24x1.5 0.9449 24.0000 ~17 1.500 22.5 mm
M24x2 0.9449 24.0000 ~13 2.000 22 mm
M25x2 0.9843 25.0000 ~13 2.000 23 mm
M25x1 0.9843 25.0000 ~26 1.000 24 mm
M25x1.5 0.9843 25.0000 ~17 1.500 23.5 mm
M26x1.5 1.0236 26.0000 ~17 1.500 24.5 mm
M27x1.5 1.0630 27.0000 ~17 1.500 25.5 mm
M27x3 1.0630 27.0000 ~9 3.000 24 mm
Diameter Diameter Thread count Thread pitch Tap drill
Tap size
(in) (mm) (TPI) (mm) size
M27x1 1.0630 27.0000 ~26 1.000 26 mm
M27x2 1.0630 27.0000 ~13 2.000 25 mm
M28x2 1.1024 28.0000 ~13 2.000 26 mm
M28x1 1.1024 28.0000 ~26 1.000 27 mm
M28x1.5 1.1024 28.0000 ~17 1.500 26.5 mm
M30x1.5 1.1811 30.0000 ~17 1.500 28.5 mm
M30x3.5 1.1811 30.0000 ~8 3.500 26.5 mm
M30x2 1.1811 30.0000 ~13 2.000 28 mm
M33x2 1.2992 33.0000 ~13 2.000 31 mm
M33x3.5 1.2992 33.0000 ~8 3.500 29.5 mm
M36x3 1.4173 36.0000 ~9 3.000 33 mm
M36x4 1.4173 36.0000 ~7 4.000 32 mm
M39x4 1.5354 39.0000 ~7 4.000 35 mm
M39x3 1.5354 39.0000 ~9 3.000 36 mm
M42x4.5 1.6535 42.0000 ~6 4.500 37.5 mm
M45x4.5 1.7717 45.0000 ~6 4.500 40.5 mm
M48x5 1.8898 48.0000 ~6 5.000 43 mm
M52x5 2.0472 52.0000 ~6 5.000 47 mm
M56x5.5 2.2047 56.0000 ~5 5.500 50.5 mm
M60x5.5 2.3622 60.0000 ~5 5.500 54.5 mm

You might also like