Scribd
Upload
489 views2 pages

Inspection Checklist For: Control Valves

This document provides a checklist for inspecting the installation of control valves on a project. It lists 10 items to check, including verifying the correct control valve types and sizes were used, they are installed in the right locations and orientations per the drawings, are properly labeled and accessible, and do not leak when pressure tested. Engineers are to use the checklist to inspect the installation and confirm it is acceptable, making notes of any issues.

Uploaded by

abdelkader benabdallah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
489 views2 pages

Inspection Checklist For: Control Valves

This document provides a checklist for inspecting the installation of control valves on a project. It lists 10 items to check, including verifying the correct control valve types and sizes were used, they are installed in the right locations and orientations per the drawings, are properly labeled and accessible, and do not leak when pressure tested. Engineers are to use the checklist to inspect the installation and confirm it is acceptable, making notes of any issues.

Uploaded by

abdelkader benabdallah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Inspection and Test Plans (ITP) – MUM-08

Control Valves Installation Checklist

Client: Project Name: Project No:

Area: Drawing No’s: Date: Sheet: 1 of 2

Check Conducted By: Signature: Check Approved By: Signature:

INSPECTION CHECKLIST FOR: CONTROL VALVES


The below checks are to be completed by the Mechanical Contractor

INSPECTION HISTORY
NO: DESCRIPTION: INSPECTION:
ACCEPTABLE: DATE: COMMENTS:

Quality Control
1 Control valve types and CV value approved for use Yes No Yes No
2 Control valves not being used are correctly stored Yes No Yes No
Installation
3 Drawings on site are the latest issue Yes No Yes No
Control valves are installed in correct location as per
4 Yes No Yes No
approved drawings and valve schedule
Control valves are installed in the correct direction of
5 Yes No Yes No
water flow
Control valves are undamaged and have all binder points
6 upstream and downstream to allow commissioning and Yes No Yes No
all wells required for pressure/temperature measuring
Control valves are clearly labelled including number, CV
7 Yes No Yes No
and size
Confirm installation does not leak when pipe work system
8 Yes No Yes No
is pressure tested
Control valves installed at a reachable height from the
9 Yes No Yes No
floor or platform
Confirm valves can be removed without disruption to
10 Yes No Yes No
adjacent pipe work

1
INSPECTION HISTORY
NO: DESCRIPTION: INSPECTION:
ACCEPTABLE: DATE: COMMENTS:
Mark alterations, sizes + final location on As Built
11
drawings for record purposes

ADDITIONAL COMMENTS:

You might also like