EN - For pricing and availability in your local country please visit one of the below links:

DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:

FR - Pour connaître les tarifs et la disponibilité dans votre pays, cliquez sur l'un des liens suivants:

DEBE33D103ZA3B DEA1X3D220JC1B DEA1X3D331JA3B DEA1X3F100JCDB DEA1X3F120JCDB

DEA1X3F470JC3B DEA1X3F470JD3B DEBB33F332KA3B DEBF33D222ZB2B DEC1X3J101JC4B

DEC1X3J680JC4B DECB33J151KC4B DEHR33D122KA3B DEA1X3D470JA2B. DE21XKY680JA2BM0

1

EN DE FR
This Datasheet is presented by Dieses Datenblatt wird vom Cette fiche technique est
the manufacturer Hersteller bereitgestellt présentée par le fabricant
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our C85E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/
High Voltage
Ceramic Capacitors

Murata
Manufacturing Co., Ltd.
Cat.No.C85E
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

CONTENTS 1

Part Numbering 2
2
1 Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2- 4

2 Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2- 6

3 Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 8

3
4 Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1- 10

Type KY/KH/KX Specifications and Test Methods 12

5 DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan- 16

DEJ Series Specifications and Test Methods 17 4

Safety Recognized Ceramic Capacitors Characteristics Data (Typical Example) 20

Safety Recognized Ceramic Capacitors Packaging 23

Safety Recognized Ceramic Capacitors !Caution 25 5

Safety Recognized Ceramic Capacitors Notice 28

6 DES Series (125 deg. C Guaranteed/Low-dissipation Factor/DC500V-1kV) 29

DES Series Specifications and Test Methods 31

6
7 DEH Series (125 deg. C Guaranteed/Low-dissipation Factor/DC250V-3.15kV) 33

DEH Series Specifications and Test Methods 36

8 DEA Series (125 deg. C Guaranteed/Class 1/DC1k-3.15kV) 39

7
DEA Series Specifications and Test Methods 42

9 DEB Series (Class 2/DC1k-3.15kV) 44

DEB Series Specifications and Test Methods 47

10 DEC Series (Class 1, 2/DC6.3kV) 49

8

DEC Series Specifications and Test Methods 51

High Voltage Ceramic Capacitors Characteristics Data (Typical Example) 53

High Voltage Ceramic Capacitors Packaging 54 9

High Voltage Ceramic Capacitors !Caution 56

High Voltage Ceramic Capacitors Notice 63

Safety Recognized Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications 64 10

Recycled Paper
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

o Part Numbering

Safety Standard Recognized Ceramic Capacitors

(Part Number) DE 2 E3 KH 102 M N3 A

q w e r t y u i o
qProduct ID yCapacitance Tolerance

Product ID Code Capacitance Tolerance

Safety Standard Recognized / High Voltage J T5%
DE
Ceramic Capacitors K T10%
M T20%
wSeries Category Z W80%, Y20%
Code Outline Contents
1 IEC60384-14 Class X1, Y1 uLead Style
Safety Standard
2 Recognized IEC60384-14 Class X1, Y2 Dimensions (mm)
Lead
"Products which are based on Code Style Lead Pitch of
AC250V Lead Diameter
J the Electrical Appliance and Spacing Components
(r.m.s.)
Material Safety Law of Japan" A2 5
In case of Electrical Appliance and Material Safety Law of Japan, first A3 Vertical 7.5 ø0.6T0.05
three digits (qProduct ID and wSeries Category) express "Series Crimp Y
A4 Long 10
Name".
In case of Safety Recognized Capacitors, first three digits express A5 10 ø0.6W0.1,Y0.05
product code. The following fourth figure expresses recognized type B2 5
shown in rSafety Standard Recognized Type column. Vertical
B3 7.5 ø0.6T0.05
Crimp Y
B4 Short 10
eTemperature Characteristics B5 10 ø0.6W0.1, Y0.05
Temperature Cap.Change Temperature C3 Straight Long 7.5 ø0.6T0.05 Y
Code
Characteristics or Temp. Coeff. Range D3 Straight Short 7.5 ø0.6T0.05 Y
B3 B T10% N2 5 12.7
E3 E W20%,Y55% Y25 to W85D N3 Vertical 7.5 ø0.6T0.05 15
F3 F W30%,Y80% N4 Crimp 10 25.4
1X SL W350 to Y1000ppm/D W20 to W85D N5 Taping 10 ø0.6W0.1, Y0.05 25.4
N7 7.5 ø0.6T0.05 30
rRated Voltage/Safety Standard Recognized Type Straight Taping
P3 7.5 ø0.6T0.05 15
Code Rated Voltage
E2 AC250V iPackaging

KH X1, Y2; AC250V, (Safety Standard Recognized Type KH) Code Packaging
KY X1, Y2; AC250V, (Safety Standard Recognized Type KY) A Ammo Pack Taping Type
KX X1, Y1; AC250V, (Safety Standard Recognized Type KX) B Bulk Type

tCapacitance oIndividual Specification Code

Expressed by three figures. The unit is pico-farad (pF). The first In case part number cannot be identified without "Individual
and second figures are significant digits, and the third figure Specification", it is added at the end of part number. Expreseed
expresses the number of zeros which follow the two numbers. by three-digit alphanumerics.

2
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors

(Part Number) DE B B3 3A 102 K N2 A

q w e r t y u i o
qProduct ID yCapacitance Tolerance

Product ID Code Capacitance Tolerance

Safety Standard Recognized / High Voltage D T0.5pF
DE
Ceramic Capacitors J T5%
K T10%
wSeries Category Z W80%, Y20%
Code Outline Contents
A Class 1 (Char. SL) DC1-3.15kV Rated uLead Style

B Class 2 DC1-3.15kV Rated Dimensions(mm)

Lead
C Class 1, 2 DC6.3kV Rated Code Style Lead Pitch of
Lead Diameter
High Voltage High Temperature Guaranteed, Spacing Components
H
Low-dissipation Factor (Char. R, C) A2 Vertical 5
High Temperature Guaranteed, A3 Crimp 7.5 ø0.6T0.05 Y
S Long
Low-dissipation Factor (Char. D) A4 10
First three digits (qProduct ID and wSeries Category) express "Series B2/J2 5
Vertical
Name".
B3/J3 Crimp 7.5 ø0.6T0.05 Y
B4 Short 10
eTemperature Characteristics C1 5 ø0.5T0.05
Temperature Cap. Change Temperature C3 Straight 7.5
Code ø0.6T0.05 Y
Characteristics or Temp. Coeff. Range C4 Long 10
B3 B T10% CD 7.5 ø0.5T0.05
E3 E W20%,Y55% Y25 to W85D D1 5 ø0.5T0.05
Straight
F3 F W30%,Y80% D3 7.5 ø0.6T0.05 Y
Short
T20% Y25 to W85D DD 7.5 ø0.5T0.05
C3 C
W15%,Y30% W85 to W125D N2 Vertical 5 12.7
T15% Y25 to W85D N3 Crimp 7.5 ø0.6T0.05 15
R3 R
W15%,Y30% W85 to W125D N7 Taping 7.5 30
D3 D W20%,Y30% Y25 to W125D P2 Straight 5 12.7
ø0.6T0.05
1X SL W350 to Y1000ppm/D W20 to W85D P3 Taping 7.5 15

rRated Voltage iPackaging

Code Rated Voltage Code Packaging

2E DC250V A Ammo Pack Taping Type
2H DC500V B Bulk Type
3A DC1kV
3D DC2kV oIndividual Specification Code

3F DC3.15kV In case part number cannot be identified without "Individual

Specification", it is added at the end of part number. Expressed
3J DC6.3kV by three-digit alphanumerics.

tCapacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two numbers.

3
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

1 Safety Recognized/High Voltage Ceramic Capacitors

Type KY (Basic Insulation) -IEC60384-14 Class X1, Y2-

D max. T max.
■ Features
1. We design capacitors in much more compact size than
type KH, having reduced the diameter by 25% max.

3.0 max.
e
2. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).

25.0 min.
F±1.0
3. Dielectric strength:
AC2000V (In case of lead spacing F=5mm) ød

AC2600V (In case of lead spacing F=7.5mm)

(in mm)
4. Class X1/Y2 capacitors which are recognized by [Bulk] Lead Code Coating Extension e ød
UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/ Vertical Crimp Long (A2, A3)
A2, A3 Up to the end of crimp 0.6±0.05
NSW.
5. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
D max. T max.
6. Cost-saving automatic insertion available.
7. Available product for RoHS Restriction
(EU Directive 2002/95/EC).

3.0 max.
e

■ Applications

5.0±1.0
ød
1. Ideal for use as X/Y capacitors for AC line filter F±0.8
and primary-secondary coupling on switching power
supplies and AC adapters. (in mm)

2. Ideal for use on D-A isolation and noise absorption [Bulk] Lead Code Coating Extension e ød
Vertical Crimp Short (B2, B3)
for DAA modems without transformers. B2, B3 Up to the end of crimp 0.6±0.05

■ Standard Recognition ■ Marking

Standard No. Recognized No. Rated Voltage Example Item

UL UL1414 E37921 q Type Designation KY
CSA E384-14 LR44559 w Nominal Capacitance
(Under 100pF : Actual value,
BSI
EN60065 (8.8, 14.2)
EN132400
227935 w 472M e
100pF and over : Marked with 3 figures)
SEMKO 507224
q KY250~ e Capacitance Tolerance
SEV 05.0742
X1 Y2 r Company Name Code 8

91890,
t 65 8 r
t Manufactured Date Code
91892, AC250V(r.m.s.)
VDE Class Code X1Y2
EN132400 91894,
91896 Rated Voltage Mark 250~
FIMKO 189014 A1
NEMKO P96100479
DEMKO 305182-02
NSW IEC60384-14
6824/2
(SAA) (2nd Edition)
The recognition number might change by the revision of the application
standard and the change within the range of acquisition.

4
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Lead Spacing F=7.5mm 1

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead
Part Number Voltage Dia. D Spacing F Thickness T Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1)
DE21XKY100JpppM02 250 SL 10 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE21XKY150JpppM02 250 SL 15 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE21XKY220JpppM02 250 SL 22 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE21XKY330JpppM02 250 SL 33 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE21XKY470JpppM02 250 SL 47 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE21XKY680JpppM02 250 SL 68 ±5% 8 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY101KpppM02 250 B 100 ±10% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY151KpppM02 250 B 150 ±10% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY221KpppM02 250 B 220 ±10% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY331KpppM02 250 B 330 ±10% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY471KpppM02 250 B 470 ±10% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2B3KY681KpppM02 250 B 680 ±10% 8 max. 7.5 5.0 max. A3B B3B N3A
DE2E3KY102MpppM02 250 E 1000 ±20% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2E3KY152MpppM02 250 E 1500 ±20% 7 max. 7.5 5.0 max. A3B B3B N3A
DE2E3KY222MpppM02 250 E 2200 ±20% 8 max. 7.5 5.0 max. A3B B3B N3A
DE2E3KY332MpppM02 250 E 3300 ±20% 9 max. 7.5 5.0 max. A3B B3B N3A
DE2E3KY472MpppM02 250 E 4700 ±20% 10 max. 7.5 5.0 max. A3B B3B N3A
DE2F3KY103MpppM02 250 F 10000 ±20% 14 max. 7.5 5.0 max. A3B B3B N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.

Lead Spacing F=5mm

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead
Part Number Voltage Dia. D Spacing F Thickness T Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1)
DE21XKY100JpppM01 250 SL 10 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE21XKY150JpppM01 250 SL 15 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE21XKY220JpppM01 250 SL 22 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE21XKY330JpppM01 250 SL 33 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE21XKY470JpppM01 250 SL 47 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE21XKY680JpppM01 250 SL 68 ±5% 8 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY101KpppM01 250 B 100 ±10% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY151KpppM01 250 B 150 ±10% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY221KpppM01 250 B 220 ±10% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY331KpppM01 250 B 330 ±10% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY471KpppM01 250 B 470 ±10% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2B3KY681KpppM01 250 B 680 ±10% 8 max. 5.0 5.0 max. A2B B2B N2A
DE2E3KY102MpppM01 250 E 1000 ±20% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2E3KY152MpppM01 250 E 1500 ±20% 7 max. 5.0 5.0 max. A2B B2B N2A
DE2E3KY222MpppM01 250 E 2200 ±20% 8 max. 5.0 5.0 max. A2B B2B N2A
DE2E3KY332MpppM01 250 E 3300 ±20% 9 max. 5.0 5.0 max. A2B B2B N2A
DE2E3KY472MpppM01 250 E 4700 ±20% 10 max. 5.0 5.0 max. A2B B2B N2A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V".
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.

5
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

Type KH (Basic Insulation) -IEC60384-14 Class X1, Y2-

D max. T max.

2 ■ Features
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).

3.0 max.
e
2. Dielectric strength: AC2600V
3. Class X1/Y2 capacitors which are recognized by

25.0 min.
F±1.0
UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/
NSW. ød

4. Coated with flame-retardant epoxy resin (conforming

(in mm)
to UL94V-0 standard). [Bulk] Lead Code Coating Extension e ød
5. Cost-saving automatic insertion available. Vertical Crimp Long (A3)
A3 Up to the end of crimp 0.6±0.05
6. Available product for RoHS Restriction
(EU Directive 2002/95/EC).

D max. T max.
■ Applications
Ideal for use as X/Y capacitors for AC line filter and
primary-secondary coupling on switching power supplies

3.0 max.
and AC adapters. e

5.0±1.0
ød
F±0.8

(in mm)

[Bulk] Lead Code Coating Extension e ød

Vertical Crimp Short (B3) B3 Up to the end of crimp 0.6±0.05

■ Standard Recognition ■ Marking

Standard No. Recognized No. Rated Voltage Example Item

q Type Designation KH
UL UL1414 E37921
w Nominal Capacitance
CSA E384-14 LR44559 (Marked with 3 figures)
EN60065 (8.8, 14.2) e Capacitance Tolerance
BSI 227636
EN132400 w
r Company Name Code 8
SEMKO 0236131/01-02 t Manufactured Date Code
SEV 02.1106 AC250V q KH472M e UL Approval Mark
X1Y2
VDE 40002796 (r.m.s.) BS415 CSA Approval Mark
EN132400 FI 8 r BSI Approval Mark BS415
FIMKO 18986
MJ502
N 65 t SEMKO Approval Mark
NEMKO P02102025
D SEV Approval Mark
250~ MJ502
DEMKO 139471-01/A1 VDE Approval Mark
NSW IEC60384-14 FIMKO Approval Mark FI
6529/5
(SAA) (2nd Edition) NEMKO Approval Mark N
• The recognition number might change by the revision of the application DEMKO Approval Mark D
standard and the change within the range of acquisition. Class Code X1Y2
• Please contact us when the recognition of CQC (Chinese Safety Standard) Rated Voltage Mark 250~
or KTL (South Korean Safety Standard) is necessary.

6
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead

Part Number Voltage Dia. D Spacing F Thickness T Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1)
DE2B3KH101Kppp 250 B 100 ±10% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2B3KH151Kppp 250 B 150 ±10% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2B3KH221Kppp 250 B 220 ±10% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2B3KH331Kppp 250 B 330 ±10% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2B3KH471Kppp 250 B 470 ±10% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2B3KH681Kppp 250 B 680 ±10% 9 max. 7.5 7.0 max. A3B B3B N3A 2
DE2E3KH102Mppp 250 E 1000 ±20% 8 max. 7.5 7.0 max. A3B B3B N3A
DE2E3KH152Mppp 250 E 1500 ±20% 9 max. 7.5 7.0 max. A3B B3B N3A
DE2E3KH222Mppp 250 E 2200 ±20% 10 max. 7.5 7.0 max. A3B B3B N3A
DE2E3KH332Mppp 250 E 3300 ±20% 12 max. 7.5 7.0 max. A3B B3B N3A
DE2E3KH472Mppp 250 E 4700 ±20% 13 max. 7.5 7.0 max. A3B B3B N3A
DE2F3KH103Mppp 250 F 10000 ±20% 16 max. 7.5 7.0 max. A3B B3B N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes.Therefore, please specify only the type name(KH) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.

7
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

Type KX Small Size (Reinforced Insulation) -IEC60384-14 Class X1, Y1-

D max. T max.
■ Features
1. We design capacitors in much more compact size than
current Type KX, having reduced the diameter

3.0 max.
e
by 20% max.
2. Operating temperature range guaranteed up to 125

25.0 min.
F±1.0
degrees (UL: 85 deg.).
3 3. Dielectric strength: AC4000V ød

4. Class X1/Y1 capacitors which are recognized by

(in mm)
UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/ [Bulk] Lead Code Coating Extension e ød
IMQ. Vertical Crimp Long (A4)
A4 Up to the end of crimp 0.6±0.05
5. Possible to use with a component in appliance
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
D max. T max.
6. Coated with flame-retardant epoxy resin (conforming
to UL94V-0 standard).
7. Cost-saving automatic insertion available.

3.0 max.
8. Available product for RoHS Restriction e

5.0±1.0
(EU Directive 2002/95/EC).
ød
F±0.8
■ Applications
1. Ideal for use as X/Y capacitors for AC line filter (in mm)

and primary-secondary coupling on switching power [Bulk] Lead Code Coating Extension e ød
Vertical Crimp Short (B4)
supplies and AC adapters. B4 Up to the end of crimp 0.6±0.05

2. Ideal for use on D-A isolation and noise absorption

for DAA modems without transformers.

* : Small sized Type KX differs from current Type KX

in electrical characteristics, such as the voltage
dependency, of capacitance temperature dependecy,
and Dielectric strength.
Therefore, before replacing current Type KX,
please make a performance check by equipment.
Please refer below too.
[Notice (Rating)
item 2. "Performance check by equipment".]

■ Standard Recognition ■ Marking

Standard No. Recognized No. Rated Voltage Example Item
UL UL1414 E37921 q Type Designation KX
CSA E384-14 LR44559 w Nominal Capacitance
EN60065 (8.8, 14.2)
w 472M e (Marked with 3 figures)
BSI
EN132400
227859 q KX250~ e Capacitance Tolerance

SEMKO 310283 X1 Y1 r Company Name Code 8

AC250V r t Manufactured Date Code
SEV 02.1105
(r.m.s.)
t 65 8
VDE 40002831 Class Code X1Y1

FIMKO EN132400 18987 Rated Voltage Mark 250~

NEMKO P02102026
DEMKO 139471-01/A1
IMQ V4069
• The recognition number might change by the revision of the application
standard and the change within the range of acquisition.
• Please contact us when the recognition of CQC (Chinese Safety Standard)
or KTL (South Korean Safety Standard) is necessary.

8
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead

Part Number Voltage Dia. D Spacing F Thickness T Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1)
DE1B3KX101KpppL01 250 B 100 ±10% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1B3KX151KpppL01 250 B 150 ±10% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1B3KX221KpppL01 250 B 220 ±10% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1B3KX331KpppL01 250 B 330 ±10% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1B3KX471KpppL01 250 B 470 ±10% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1B3KX681KpppL01 250 B 680 ±10% 9 max. 10.0 7.0 max. A4B B4B N4A
DE1E3KX102MpppL01 250 E 1000 ±20% 7 max. 10.0 7.0 max. A4B B4B N4A
DE1E3KX152MpppL01 250 E 1500 ±20% 8 max. 10.0 7.0 max. A4B B4B N4A
DE1E3KX222MpppL01 250 E 2200 ±20% 9 max. 10.0 7.0 max. A4B B4B N4A
DE1E3KX332MpppL01 250 E 3300 ±20% 10 max. 10.0 7.0 max. A4B B4B N4A
DE1E3KX472MpppL01 250 E 4700 ±20% 12 max. 10.0 7.0 max. A4B B4B N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes.Therefore, please specify only the type name (KX) and capacitance of products
3
in the parts list when it is required for applying safety standard of electric equipment.

9
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

Type KX (Reinforced Insulation) -IEC60384-14 Class X1, Y1-

D max. T max.
■ Features
1. Operating temperature range guaranteed up to 125
degrees (UL: 85 deg.).

4.0 max.
e
2. Dielectric strength: AC4000V
3. Class X1/Y1 capacitors which are recognized by

25.0 min.
F±1.0
UL/CSA/BSI/SEMKO/SEV/VDE/FIMKO/NEMKO/DEMKO/
IMQ. ød

4. Possible to use with a component in appliance

(in mm)
requiring reinforced insulation and double [Bulk] Lead Code Coating Extension e ød
insulation based on UL1492, IEC60065 and IEC60950. Vertical Crimp Long (A5)
A5 Up to the end of crimp 0.6±0.1
0.05

5. Coated with flame-retardant epoxy resin (conforming

to UL94V-0 standard).
6. Cost-saving automatic insertion available.
4 7. Available product for RoHS Restriction
D max. T max.

(EU Directive 2002/95/EC).

4.0 max.
■ Applications e

5.0±1.0
Ideal for use as X/Y capacitors for AC line filter and
ød
primary-secondary coupling on switching power supplies F±0.8
and AC adapters.
(in mm)

[Bulk] Lead Code Coating Extension e ød

Vertical Crimp Short (B5) B5 Up to the end of crimp 0.6±0.1
0.05

■ Standard Recognition ■ Marking

Example Item
Standard No. Recognized No. Rated Voltage
q Type Designation KX
UL UL1414 E37921
w Nominal Capacitance
CSA E384-14 LR44559 (Under 100pF : Actual value, 100pF and over : Marked with 3 figures)
EN60065 (8.8, 14.2) e Capacitance Tolerance
BSI 227859 w
EN132400 r Company Name Code 8

310283 t Manufactured Date Code

SEMKO
AC250V q KX222M e UL Approval Mark
SEV 02.1105 X1Y1
(r.m.s.) CSA Approval Mark
VDE 40002831 BS415
BSI Approval Mark BS415
FI
FIMKO EN132400 18987 MJ502
SEMKO Approval Mark
N 8 r
NEMKO P02102026 SEV Approval Mark MJ502
250~ D 65 t VDE Approval Mark
DEMKO 139471-01/A1
IMQ Approval Mark
IMQ V4069
FIMKO Approval Mark FI
• The recognition number might change by the revision of the application NEMKO Approval Mark N
standard and the change within the range of acquisition. DEMKO Approval Mark D
• Please contact us when the recognition of CQC (Chinese Safety Standard)
Class Code X1Y1
or KTL (South Korean Safety Standard) is necessary.
Rated Voltage Mark 250~

10
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead

Part Number Voltage Dia. D Spacing F Thickness T Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1)
DE11XKX100Jppp 250 SL 10 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE11XKX150Jppp 250 SL 15 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE11XKX220Jppp 250 SL 22 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE11XKX330Jppp 250 SL 33 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE11XKX470Jppp 250 SL 47 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE11XKX680Jppp 250 SL 68 ±5% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX101Kppp 250 B 100 ±10% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX151Kppp 250 B 150 ±10% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX221Kppp 250 B 220 ±10% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX331Kppp 250 B 330 ±10% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX471Kppp 250 B 470 ±10% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1B3KX681Kppp 250 B 680 ±10% 10 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX102MpppA01 250 E 1000 ±20% 8 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX152MpppA01 250 E 1500 ±20% 9 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX222MpppA01 250 E 2200 ±20% 10 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX332MpppA01 250 E 3300 ±20% 12 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX392MpppA01 250 E 3900 ±20% 13 max. 10.0 8.0 max. A5B B5B N5A
DE1E3KX472MpppA01 250 E 4700 ±20% 15 max. 10.0 8.0 max. A5B B5B N5A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
4
Murata part numbers might be changed depending on lead code or any other changes.Therefore, please specify only the type name (KX) and capacitance of products
in the parts list when it is required for applying safety standard of electric equipment.

11
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Type KY/KH/KXand
Specifications Specifications
Test Methods and Test Methods

Apply to Type KY/KH/KX

Operating Temperature Range : -25 to +125°C (-25 to +85°C in case of the standard of UL)
No. Item Specifications Testing Method
The capacitor should be visually inspected for evidence of
No marked defect on appearance form and
1 Appearance and Dimensions defect.
dimensions are within specified range.
Dimensions should be measured with slide calipers.
2 Marking To be easily legible The capacitor should be visually inspected.
3 Capacitance Within specified tolerance

Char. Specifications The capacitance, dissipation factor and Q should be measured

B, E D.F.V2.5% at 20˚C with 1±0.1kHz (char. SL : 1±0.1MHz) and AC5V
Dissipation Factor (D.F.)
4 F D.F.V5.0% (r.m.s.) max.
Q
QU400+20C*1(CF30pF)
SL
QU1000 (CU30pF)

The insulation resistance should be measured with

DC500±50V within 60±5 sec. of charging.
5 Insulation Resistance (I.R.) 10000MΩ min.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
The capacitor should not be damaged when test voltages of
Table 1 are applied between the lead wires for 60 sec.
4 <Table 1>
Between Lead Type Test Voltage
No failure In case of lead spacing F=5mm AC2000V(r.m.s.)
Wires KY
In case of lead spacing F=7.5mm AC2600V(r.m.s.)
KH AC2600V(r.m.s.)
KX AC4000V(r.m.s.)

First, the terminals of the capacitor

should be connected together. Then,
as shown in figure at right, a metal
Dielectric foil should be closely wrapped around
6 the body of the capacitor to the Metal
Strength Foil about
distance of about 3 to 4mm from 3 to 4mm
each terminal.
Then, the capacitor should be inserted Metal
Balls
Body into a container filled with metal balls
No failure
Insulation of about 1mm diameter. Finally, AC
voltage of Table 2 is applied for 60 sec. between the capacitor
lead wires and metal balls.
<Table 2>
Type Test Voltage
KY AC2600V(r.m.s.)
KH AC2600V(r.m.s.)
KX AC4000V(r.m.s.)

The capacitance measurement should be made at each step

Char. Capacitance Change
specified in Table 3.
B Within ±10%
E Within +20
-55%
<Table 3>
F Within +30
-80% Step Temperature (ºC)
7 Temperature Characteristics (Temp. range: -25 to +85°C) 1 20±2
2 -25±2
Char. Temperature Coefficient 3 20±2
SL +350 to -1000ppm/°C 4 85±2
(Temp. range: +20 to +85°C) 5 20±2

The lead wire of a capacitor should be dipped into molten

solder for 2±0.5 sec.
Lead wire should be soldered with uniform coating
The depth of immersion is up to about 1.5 to 2.0mm from the
8 Solderability of Leads on the axial direction over 3/4 of the circumferential
root of lead wires.
direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
*1 "C" expresses nominal capacitance value (pF).
Continued on the following page.

12
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Type KY/KH/KX Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect As shown in figure, the lead wires
should be immersed in solder of Thermal , Capacitor
Capacitance Screen, ,
Change
Within ±10% 350±10°C or 260±5°C up to 1.5 ,
,,,,,,,,,, ,
,,,,,,
, 1.5
to 2.0mm from the root of terminal ,,,,,,,,,, ,,,,
,
, to 2.0mm
Soldering I.R. 1000MΩ min. for 3.5±0.5 sec. (10±1 sec. for ,
,,,Molten
9 Effect 260±5°C). Solder
(Non-Preheat) Pre-treatment:
Dielectric Capacitor should be stored at 85±2°C for 1 hr., then placed at
Per Item 6 ∗2
room condition for 24±2 hrs. before initial measurements.
Strength
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at ∗2room condition.
Appearance No marked defect First the capacitor should be
stored at 120+0/-5°C for Thermal , Capacitor
Capacitance Screen, ,
Change
Within ±10% 60+0/-5 sec. ,
,,,,,,,,,, ,
, 1.5
,,,,,,
Then, as in figure, the lead wires ,,,,,,,,,, ,,,,
,
, to 2.0mm
I.R. 1000MΩ min. should be immersed solder of ,
,,,Molten
Soldering 260+0/-5°C up to 1.5 to 2.0mm Solder
10 Effect from the root of terminal for
(On-Preheat) 7.5+0/-1 sec.
Dielectric Pre-treatment:
Per Item 6 Capacitor should be stored at 85±2°C for 1 hr., then placed at
Strength
∗2
room condition for 24±2 hrs. before initial measurements. 4
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at ∗2room condition.
Appearance No marked defect

Capacitance Within the specified tolerance The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration total amplitude, with about a 1 minute rate of vibration change
11 Char. Specifications
Resistance from 10Hz to 55Hz and back to 10Hz.
B, E D.F.V2.5%
D.F. Apply for a total of 6 hrs., 2 hrs. each in 3 mutually
F D.F.V5.0%
Q perpendicular directions.
QU400+20C*1(CF30pF)
SL
QU1000 (CU30pF)

Appearance No marked defect

Char. Capacitance Change

Capacitance B Within ±10%
Change E, F Within ±15%
SL Within ± 5%
Humidity Set the capacitor for 500±12 hrs. at 40±2°C in 90 to 95%
(Under Char. Specifications relative humidity.
12
Steady B, E D.F.V5.0% Post-treatment:
D.F. Capacitor should be stored for 1 to 2 hrs. at ∗2room condition.
State) F D.F.V7.5%
Q
QU275+5/2C*1(CF30pF)
SL
QU350 (CU30pF)

I.R. 3000MΩ min.

Dielectric
Per Item 6
Strength
Appearance No marked defect

Char. Capacitance Change

Capacitance B Within ±10%
Change E, F Within ±15%
SL Within ± 5%

Apply the rated voltage for 500±12 hrs. at 40±2°C in 90 to 95%

Humidity Char. Specifications relative humidity.
13 B, E D.F.V5.0%
Loading Post-treatment:
D.F. D.F.V7.5%
F Capacitor should be stored for 1 to 2 hrs. at ∗2room condition.
Q QU275+5/2C*1(CF30pF)
SL
QU350 (CU30pF)

I.R. 3000MΩ min.

Dielectric
Per Item 6
Strength
1
* "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
Continued on the following page.

13
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Type KY/KH/KXand
Specifications Specifications
Test Methods and Test Methods
Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
Capacitance
Within ±20% KX: 8kV) impulses for three times. After the capacitors are
Change
applied to life test.
I.R. 3000MΩ min. 100 (%)
Front time (T1) =1.2µs=1.67T
90
Time to half-value (T2) =50µs
50
30
0
t
T
T1
14 Life
T2
Apply a voltage of Table 4 for 1000 hrs. at 125+2/-0°C, and
Dielectric relative humidity of 50% max.
Per Item 6
Strength
<Table 4>
Applied Voltage
AC425V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1 sec.

Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at ∗2room condition.
4
The capacitor should be subjected to applied flame for 15 sec.
and then removed for 15 sec. until 5 cycles are completed.

The capacitor flame discontinues as follows. Capacitor

76 Flame
15 Flame Test Cycle Time (sec.)
1 to 4 30 max.
7
5 60 max. 12
38
20°
Gas Burner: Inside Dia. 9.5 (in mm)

As shown in the figure at right, fix the body

of the capacitor and apply a tensile weight
Tensile gradually to each lead wire in the radial
Robustness direction of the capacitor up to 10N and keep
Lead wire should not be cut off. Capacitor should W
16 of it for 10±1 sec.
not be broken.
Terminations Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
Bending
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheese-cloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5 sec. The UAC
should be maintained for 2 min. after the last discharge.

F L1 L2 R
S1

C1 C2 C3 Cx Ct Ut
S2 UAC L3 L4
Tr

Oscilloscope

17 Active Flammability The cheese-cloth should not be on fire.

C1,2 : 1µF±10% C3 : 0.033µF±5% 10kV
L1 to 4 : 1.5mH±20% 16A Rod core choke
Ct : 3µF±5% 10kV R : 100Ω±2%
Cx : Capacitor under test UAC : UR±5%
F : Fuse, Rated 10A UR : Rated Voltage
Ut : Voltage applied to Ct
Ux

5kV

time
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

14
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Specifications and Test MethodsType KY/KH/KX Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

The capacitor under test should be held in the flame in the
position which best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30 sec.
Length of flame : 12±1mm
Gas burner : Length 35mm min.
Inside Dia. 0.5±0.1mm
Outside Dia. 0.9mm max.
The burning time should not exceed 30 sec. Gas : Butane gas Purity 95% min.
18 Passive Flammability
The tissue paper should not ignite.
Test Specimen

About 8mm

200T5mm
45°

Tissue
About 10mm Thick Board

Appearance No marked defect The capacitor should be subjected to 5 temperature cycles,

then consecutively to 2 immersion cycles.
Char. Capacitance Change
Capacitance B Within ±10% <Temperature Cycle>
4
Change E, F Within ±20% Step Temperature (ºC) Time (min)
SL Within ± 5% 1 -25+0/-3 30
2 Room temp. 3
3 125+3/-0 30
Char. Specifications
4 Room temp. 3
B, E D.F.V5.0%
D.F. Cycle time: 5 cycle
F D.F.V7.5%
Q
Temperature QU275+5/2C*1(CF30pF)
SL <Immersion Cycle>
and QU350 (CU30pF)
19
Immersion Time Immersion
Cycle I.R. 3000MΩ min. Step Temperature (ºC)
(min) Water
Clean
1 65+5/-0 15
water
Salt
2 0±3 15
water
Dielectric Cycle time: 2 cycle
Per Item 6
Strength Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
∗2
room condition for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at ∗2room condition.
*1 "C" expresses nominal capacitance value (pF).
*2 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Type KY/KH/KX are recognized by UL1414 6th edition and CSA E384-14.
"Discharge Test" that was compulsory in previous safety standards(*) is not specified in new safety standards. (* UL1414 5th edition and CSA C22.2 No.1)
Therefore the description of "Discharge Test" is deleted in this catalog.

15
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DEJ Series -Based on the Electrical Appliance and Material Safety Law of Japan-

<Fig. 1> <Fig. 2>

■ Features D max. T max. T max.

1. Coated with flame-retardant epoxy resin (conforming

to UL94V-0 standard).

3.0 max.
e
2. Cost-saving automatic insertion available.
3. This type is based on the electrical appliance and

25.0 min.
25.0 min.
material safety law of Japan and JIS-C-5150
F±1.0
ød
(general rules of AC mains supply capacitors of
(in mm)
electronic equipment).
Lead Code Coating Extension e ød Style
4. Available product for RoHS Restriction [Bulk] A3 Up to the end of crimp 0.6±0.05 Fig. 1
(EU Directive 2002/95/EC). Vertical Crimp Long (A3)
C3 3.0 max. 0.6±0.05 Fig. 2
Straight Long (C3)

■ Applications
Ideal for use on AC line filter and primary-secondary <Fig. 1> <Fig. 2>
D max. T max. T max.
coupling for switching power supplies and AC adapters.

■ Marking

3.0 max.
e

5.0±1.0
5.0±1.0
Temp. Char. ød
E, F
F±0.8

5 102Z (in mm)

Body Diameter

ø7-8mm 250~
65 Lead Code Coating Extension e ød Style
[Bulk] B3 Up to the end of crimp 0.6±0.05 Fig. 1
Nominal

Vertical Crimp Short (B3)

D3 3.0 max. 0.6±0.05 Fig. 2
332Z Straight Short (D3)
ø9-11mm 250~
65

Nominal Capacitance Marked with 3 figures

Capacitance Tolerance Marked with code
Rated Voltage Marked with code
Manufacturer's Marked with
Identification (omitted for nominal body diameter ø8mm and under)

Manufactured Date Code Abbreviation

AC Rated Temp. Capacitance Body Lead Body Lead Lead Lead Lead
Part Number Voltage Dia. D Spacing F Thickness T Package Package Package Package
(Vac) Char. (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping (1) Taping (2)
DEJE3E2102Zppp 250 E 1000 +80/-20% 7 max. 7.5 4.0 max. C3B D3B N2A P3A
DEJE3E2222Zppp 250 E 2200 +80/-20% 8 max. 7.5 4.0 max. A3B B3B N2A N3A
DEJE3E2332Zppp 250 E 3300 +80/-20% 9 max. 7.5 4.0 max. A3B B3B N2A N3A
DEJE3E2472Zppp 250 E 4700 +80/-20% 11 max. 7.5 4.0 max. A3B B3B N2A N3A
DEJF3E2472Zppp 250 F 4700 +80/-20% 8 max. 7.5 4.0 max. A3B B3B N2A N3A
DEJF3E2103Zppp 250 F 10000 +80/-20% 11 max. 7.5 4.0 max. A3B B3B N2A N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Taping (1): Lead spacing F=5.0mm, Taping (2): Lead spacing F=7.5mm.

16
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEJ Series Specifications and Test Methods

! Apply to DEJ Series (Products which are based on the electrical appliance and material safety law of Japan)
Operating Temperature Range : -25 to +85°C
No. Item Specifications Testing Method
The capacitor should be visually inspected for evidence of
No marked defect on appearance form and
1 Appearance and Dimensions defect.
dimensions are within specified range.
Dimensions should be measured with slide calipers.
2 Marking To be easily legible The capacitor should be visually inspected.
The capacitance should be measured at 20˚C with 1±0.1kHz
3 Capacitance Within specified tolerance
and AC5V(r.m.s.) max.

Char. Specifications
Dissipation Factor The dissipation factor should be measured at 20˚C with
4 E D.F.V2.5%
(D.F.) 1±0.1kHz and AC5V(r.m.s.) max.
F D.F.V5.0%

The insulation resistance should be measured with

5 Insulation Resistance (I.R.) 10000MΩ min.
DC500±50V within 60±5 sec. of charging.
Between Lead The capacitor should not be damaged when AC1500V(r.m.s.)
No failure
Wires are applied between the lead wires for 60 sec.
First, the terminals of the capacitor should be connected
together. Then, as shown in figure at right,
Dielectric the capacitor should be immersed
6 into 10% salt solution up to a position
Strength Body About
No failure of about 3 to 4mm apart from the
Insulation 3 to 4mm
terminals.
Electrode
Finally, AC1500V(r.m.s.) is applied Plate
for 60 sec. between the capacitor lead 10% Salt Solution
wires and electrode plate.
The capacitance measurement should be made at each step
specified in Table 1.
<Table 1>
5
Char. Capacitance Change Step Temperature (ºC)
7 Temperature Characteristics E Within +20
-55% 1 20±2
F Within +30
-80% 2 -25±2
3 20±2
4 85±2
5 20±2

Appearance No marked defect As in Figure 1, discharge is made 50 times at 5 sec. intervals

from the capacitor (Cd) charged at DC voltage of specified.
I.R. 1000MΩ min.
R3 S R1

Vs Ct R2
Cd

Discharge
8
Test Fig.1
Dielectric
Per Item 6
Strength
Ct : Capacitor under test R2 : 100MΩ
S : High-voltage switch R3 : Surge resistance
R1 : 1000Ω
Cd 0.001µF
Vs DC10kV

The lead wire of a capacitor should be dipped into molten

solder for 2±0.5 sec.
Lead wire should be soldered with uniform coating
The depth of immersion is up to about 1.5 to 2.0mm from the
9 Solderability of Leads on the axial direction over 3/4 of the circumferential
root of lead wires.
direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C

Continued on the following page.

17
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEJ Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect As shown in figure, the lead wires
Thermal , Capacitor
should be immersed in solder of Screen, ,
I.R. 1000MΩ min.
350±10˚C up to 1.5 to 2.0mm from ,
,,,,,,,,,,
,,,,,,,
, 1.5
the root of terminal for 3.5±0.5 sec. ,,,,,,,,,, ,,,,
,
, to 2.0mm
,
Soldering Pre-treatment: ,,,Molten
10 Effect Capacitor should be stored at Solder

(Non-Preheat) Dielectric 85±2˚C for 1 hr., then placed at ∗1room condition for 24±2 hrs.
Per Item 6
Strength before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
∗1
room condition.
Appearance No marked defect First the capacitor should be
Thermal , Capacitor
stored at 120+0/-5°C for Screen, ,
I.R. 1000MΩ min. ,
,,,,,,,,,, ,
60+0/-5 sec. ,,,,,,
,,,,,,,,,,
, 1.5
,,,,
,
Then, as in figure, the lead wires , to 2.0mm
should be immersed solder of
, Molten
,,,
260+0/-5°C up to 1.5 to 2.0mm Solder
Soldering
from the root of terminal for
11 Effect
7.5+0/-1 sec.
(On-Preheat) Dielectric
Per Item 6 Pre-treatment:
Strength
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
∗1
room condition for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at
∗1
room condition.
Appearance No marked defect
The capacitor should be firmly soldered to the supporting lead
Capacitance Within the specified tolerance wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration total amplitude, with about a 1 minute rate of vibration change
12
Resistance Char. Specifications from 10Hz to 55Hz and back to 10Hz.
5 D.F. E D.F.V2.5% Apply for a total of 6 hrs., 2 hrs. each in 3 mutually perpendicular
F D.F.V5.0% directions.

Solvent The capacitor should be immersed into a isopropyl alcohol for

13 Appearance No marked defect
Resistance 30±5 sec.
Appearance No marked defect

Char. Capacitance Change

Capacitance
E Within ±20%
Change Set the capacitor for 500±12 hrs. at 40±2˚C in 90 to 95%
F Within ±30%
relative humidity.
Humidity
Pre-treatment:
(Under
14 Char. Specifications Capacitor should be stored at 85±2˚C for 1 hr., then placed at
Steady ∗1
D.F. E D.F.V5.0% room condition for 24±2 hrs. before initial measurements.
State) Post-treatment:
F D.F.V7.5%
Capacitor should be stored for 1 to 2 hrs. at ∗1room condition.
I.R. 1000MΩ min.
Dielectric
Per Item 6
Strength
Appearance No marked defect

Char. Capacitance Change

Capacitance
E Within ±20% The capacitor should be subjected to 40±2˚C, relative humidity
Change
F Within ±30% of 90 to 98% for 8 hrs., and then removed in room temperature
for 16 hrs. until 5 cycles.
Humidity Pre-treatment:
15 Char. Specifications
Insulation Capacitor should be stored at 85±2˚C for 1 hr., then placed at
D.F. E D.F.V5.0% ∗1
room condition for 24±2 hrs. before initial measurements.
F D.F.V7.5%
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at ∗1room condition.
I.R. 1000MΩ min.
Dielectric
Per Item 6
Strength
1
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

18
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEJ Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect

Char. Capacitance Change

Capacitance
E Within ±20%
Change Apply the rated voltage for 500±12 hrs. at 40±2˚C in 90 to 95%
F Within ±30%
relative humidity.
Pre-treatment:
Humidity
16 Char. Specifications Capacitor should be stored at 85±2˚C for 1 hr., then placed at
Loading ∗1
D.F. E D.F.V5.0% room condition for 24±2 hrs. before initial measurements.
F D.F.V7.5% Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at ∗1room condition.
I.R. 1000MΩ min.
Dielectric
Per Item 6
Strength
Appearance No marked defect Apply a voltage of Table 2 for 1500 hrs. at 85±2˚C, relative
humidity 50% max.
Char. Capacitance Change <Table 2>
Capacitance
E Within ±20% Applied Voltage
Change
F Within ±30% AC500V(r.m.s.), except that once each hour the voltage
17 Life is increased to AC1000V(r.m.s.) for 0.1 sec.
I.R. 1000MΩ min.
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
Dielectric ∗1
room condition for 24±2 hrs. before initial measurements.
Per Item 6
Strength Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at ∗1room condition.
The capacitor should be subjected
The capacitor flame discontinued as follows. to applied flame for 15 sec. and then Capacitor
removed for 15 sec. until 3 cycles 76 Flame
Cycle Time (sec.)
18 Flame Test 1 to 2 15 max.
are completed.
7
5
3 60 max. 12
38

20°
Gas Burner: Inside Dia. 9.5 (in mm)

As shown in figure at right, fix the body of

capacitor, apply a tensile weight gradually to
each lead wire in the radial direction of capacitor
Tensile
up to 10N and keep it for 10±1 sec.
Robustness W
Lead wire should not be cut off. Capacitor should
19 of
not be broken.
Terminations
Each lead wire should be subjected to 5N weight and then a
90° bend, at the point of egress, in one direction, return to
Bending
original position, and then apply a 90° bend in the opposite
direction at the rate of one bend in 2 to 3 sec.
Appearance No marked defect The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char. Capacitance Change
Capacitance <Temperature Cycle>
E Within ±20%
Change
F Within ±30% Step Temperature (ºC) Time (min)
1 -25+0/-3 30
2 Room temp. 3
Char. Specifications
3 85+3/-0 30
D.F. E D.F.V5.0%
4 Room temp. 3
F D.F.V7.5%
Cycle time: 5 cycle
Temperature I.R. 1000MΩ min.
and <Immersion Cycle>
20
Immersion Time Immersion
Cycle Step Temperature (ºC)
(min) Water
Clean
1 65+5/-0 15
water
Salt
Dielectric 2 0±3 15
Per Item 6 water
Strength Cycle time: 2 cycle
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1 hr., then placed at
∗1
room condition for 24±2 hrs.
Post-treatment:
Capacitor should be stored for 4 to 24 hrs. at ∗1room condition.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

19
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Characteristics Data (Typical Example)

■ Capacitance-Temperature Characteristics

40

20
SL
0
B
B
Cap. Change (%)

SL
-20

-40
E

-60
F E
-80
F
-100
-40 -20 0 20 40 60 80 100 120 140
Temperature (°C)

■ Insertion Loss-Frequency Characteristics

Type KY Type KH

0 Type KY 0 Type KH

Signal power : 1mW Signal power : 1mW

AC240V(r.m.s.) / 60Hz is AC240V(r.m.s.) / 60Hz is
10 10
applied on the capacitor. applied on the capacitor.
Insertion Loss (dB)

Insertion Loss (dB)

(1) DE2B3KY101KA2BM01 (1) DE2B3KH101KA3B

20 (2) DE2B3KY221KA2BM01 20 (2) DE2B3KH221KA3B
(3) DE2B3KY471KA2BM01 (1) (3) DE2B3KH471KA3B
(4) DE2E3KY102MA2BM01 (4) DE2E3KH102MA3B
(5) DE2E3KY222MA2BM01 (2) (5) DE2E3KH222MA3B
(1) 30 (3)
5 30

(5) (4)
(3)
(2) (6) DE2E3KY472MA2BM01
(7) DE2F3KY103MA3BM02
(6)
(5)
(4) (6) DE2E3KH472MA3B
(7) DE2F3KH103MA3B
(6)
40 40
(7)
(7)
50 50
1 10 100 1000 1 10 100 1000
Frequency (MHz) Frequency (MHz)

Type KX Small Size Type KX

0 Type KX Small Size 0 Type KX

Signal power : 1mW Signal power : 1mW

AC240V(r.m.s.) / 60Hz is AC240V(r.m.s.) / 60Hz is
10
applied on the capacitor. 10 applied on the capacitor.
Insertion Loss (dB)

Insertion Loss (dB)

(1) DE1B3KX101KA4BL01 (1) DE1B3KX101KA5B

20 (2) DE1B3KX221KA4BL01 (2) DE1B3KX221KA5B
(3) DE1B3KX471KA4BL01 (3) DE1B3KX471KA5B
(1) (4) DE1E3KX102MA4BL01 20 (4) DE1E3KX102MA5BA01
(2) (5) DE1E3KX222MA4BL01 (5) DE1E3KX222MA5BA01
30 (3)
(6) DE1E3KX472MA4BL01 (1) (6) DE1E3KX472MA5BA01
(4)
(2)
(5) 30
40 (3)
(6) (4)
(5)
(6)
50 40
1 10 100 1000 1 10 100 1000
Frequency (MHz) Frequency (MHz)

20
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Characteristics Data (Typical Example)

■ Leakage Current Characteristics

Type KY (B char.) Type KY (E char.)

AC voltage : 60Hz AC voltage : 60Hz
Temperature : 25°C Temperature : 25°C
1.0 4.0

Leakage current [mA(r.m.s.)]

Leakage current [mA(r.m.s.)]

0.8
3.0

01
0.6 2BM M01
Y4 71KA MA2B
2B3K 3KY472
DE 2.0 DE2E

0.4
1
2BM0 22MA2BM01
21KA 1.0 DE2E3KY2
E 2 B 3KY2
0.2 D 01
DE2E3KY102MA2BM
KA2BM01
DE2B3KY101

0.0 0.0
0 1000 2000 3000 0 1000 2000 3000

AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)]

Type KH (B char.) Type KH (E, F char.)

AC voltage : 60Hz AC voltage : 60Hz
Temperature : 25°C Temperature : 25°C
1.0 6.0

103M
A3B 5
F 3KH
A3B
5.0 DE2
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]

0.8 1K
H47
B3K
DE2
4.0
A3B
0.6
3K H472M
DE2E
A3B 3.0
21K
B3 KH2
0.4 DE2
2.0
MA3B
DE2E3KH222
3 B
0.2 H101KA
DE2B3K 1.0
DE2E3KH102MA3B

0.0 0.0
0 1000 2000 3000 0 1000 2000 3000

AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)]

Type KX Small Size (B char.) Type KX Small Size (E char.)

AC voltage : 60Hz AC voltage : 60Hz
Temperature : 25°C Temperature : 25°C
1.0 4.0

BL01
2MA4
L01 3 KX47
0.8 KA4B DE1E
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]

71
3KX4 3.0
DE1B

0.6
01
A 4BL
X2 21K 2.0
B3K
DE1 L01
222MA4B
0.4 DE1E3KX

1.0
0.2 DE1E3KX102MA4BL01
X101K A4BL01
DE1B3K

0.0 0.0
0 1000 2000 3000 4000 0 1000 2000 3000 4000

AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)]

Continued on the following page.

21
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Characteristics Data (Typical Example)

Continued from the preceding page.

Type KX (B char.) Type KX (E char.)

AC voltage : 60Hz AC voltage : 60Hz
Temperature : 25°C Temperature : 25°C
1.2 6.0
A01
A5B
1K A5B X4 72M
1.0 X47 5.0 E3K
B3K DE1

Leakage current [mA(r.m.s.)]

Leakage current [mA(r.m.s.)]

DE1
0.8 4.0

0.6 5B 3.0
1KA
X22 5BA01
B3K X222MA
DE1 DE1E3K
0.4 2.0

5B
X101KA DE1E3KX102MA5
BA01
0.2 DE1B3K 1.0

0.0 0.0
0 1000 2000 3000 4000 0 1000 2000 3000 4000

AC voltage [V(r.m.s.)] AC voltage [V(r.m.s.)]

22
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Packaging

Taping Specifications
12.7mm pitch / lead spacing 5mm taping 15mm pitch / lead spacing 7.5mm taping
Vertical crimp type Vertical crimp type
(Lead Code : N2) (Lead Code : N3)
P2 P D ∆S ∆S
P2 P D

e
ød ød

W2
P1 F P1

W0 W2
F

H0

H0
W1

W1
L

W0
W

W
øD0 øD0
P0 R P0 R

15mm pitch / lead spacing 7.5mm taping 30mm pitch / lead spacing 7.5mm taping
Straight type Vertical crimp type
(Lead Code : P3) (Lead Code : N7)
∆S
P2 P D P2 P ∆S
D
e

e
ød
W2

P1 F
P1 ød
H
W1

F
L

W0 W2
W0

H0
W1
W

W
øD0
P0 R
P0 øD0
R
25.4mm pitch / lead spacing 10.0mm taping
Vertical crimp type ∆h1 O ∆h2
∗ ∗ ∗
(Lead Code : N4, N5) T max.
Marked side 3.0 max. 4.0 max.
P ∆S
D
∗
H0 H0 5
e

Lead Code Lead Code Lead Code

P1 N2, N3, N4, N7 P3 N5
F ød
W0 W2
H0
W1
L

t2 t1

P0 øD0
R

Item Code N2 N3 P3 N7 N4 N5
Pitch of component P 12.7 15.0 15.0 30.0 25.4
Pitch of sprocket hole P0 12.7±0.3 15.0±0.3 15.0±0.3 15.0±0.3 12.7±0.3
Lead spacing F 5.0 +0.8
–0.2 7.5±1.0 7.5±1.0 7.5±1.0 10.0±1.0
Length from hole center to component center P2 6.35±1.3 7.5±1.5 7.5±1.5 7.5±1.5 —
Length from hole center to lead P1 3.85±0.7 3.75±1.0 3.75±1.0 3.75±1.0 7.7±1.5
Body diameter D See the individual product specifications
Deviation along tape, left or right ∆S 0±1.0 0±2.0
Carrier tape width W 18.0±0.5
Position of sprocket hole W1 9.0±0.5
Lead distance between reference H0 18.0 +2.0
–0 – 18.0 +2.0
–0
and bottom planes H – 20.0 +1.5
–1.0 –
Protrusion length r +0.5 to -1.0
Diameter of sprocket hole øD0 4.0±0.1
Lead diameter ød 0.6±0.05 0.6 +0.1
–0.05
Total tape thickness t1 0.6±0.3
Total thickness, tape and lead wire t2 1.5 max.
Body thickness T See the individual product specifications
Portion to cut in case of defect L 11.0 +0
–1.0
Hold down tape width W0 11.5 min.
Hold down tape position W2 1.5±1.5
Coating extension on lead e Up to the end of crimp 3.0 max. Up to the end of crimp
Deviation across tape, front ∆h1
1.0 max. 2.0 max.
Deviation across tape, rear ∆h2

(in mm)

Continued on the following page.

23
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Packaging

Continued from the preceding page.

Packaging Styles
Bulk Taping
Polyethylene Bag Ammo Pack

Minimum Quantity (Order in Sets Only)

[Bulk] 1,000 pcs.

[Taping] (pcs.)
Lead Code Type KY Type KH Type KX DEJ Series
N2 1,000 – – 1,500
N3, P3 900 900 – 1,000
N7 – 400 – –
N4, N5 – – 500 –
5
Minimum Order Quantity
[Bulk] 3,000 pcs.

[Taping] (pcs.)
Lead Code Type KY Type KH Type KX DEJ Series
N2 3,000 – – 3,000
N3, P3 2,700 2,700 – 3,000
N7 – 2,000 – –
N4, N5 – – 2,000 –

“Minimum Quantity” means the numbers of units of each delivery or order.

The quantity should be an integral multiple of the “minimum quantity”.
(In case of bulk packaging, minimum quantities differ from packing quantities in a
bulk bag.)

24
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors !Caution

■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to
use a capacitor with a rated voltage range that includes
these irregular voltages.

Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2)

Positional
V0-p V0-p Vp-p Vp-p Vp-p
Measurement

2. Operating Temperature and Self-generated Heat

(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the 5
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected at an atmosphere temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's characteristics
and reliability. (Never attempt to perform measurement
with the cooling fan running. Otherwise, accurate
measurement cannot be ensured.)

3. Test Condition for Withstanding Voltage

(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.

25
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors !Caution

Continued from the preceding page.

(2) Voltage Applied Method

When the withstanding voltage is applied, capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, test voltage should
be applied with the *zero cross. At the end of the test
time, the test voltage should be reduced to near zero,
and then capacitor's lead or terminal should be taken off
the output of the withstanding voltage test equipment.
If the test voltage without the raise from near zero voltage
would be applied directly to capacitor, the surge voltage
may arise, and therefore, a defect may be caused. Voltage sine wave

*ZERO CROSS is the point where voltage sine wave 0V

passes 0V. See figure at right. zero cross

4. Fail-Safe
When capacitor would be broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure would result
5 in an electric shock, fire or fuming.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY

RESULT, WORST CASE, IN A SHORT CIRCUIT AND
CAUSE FUMING OR PARTIAL DISPERSION WHEN THE
PRODUCT IS USED.

26
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors !Caution

■ !Caution (Storage and Operating Condition)

Operating and storage environment equipment. Store the capacitors where the
The insulating coating of capacitors does not form a temperature and relative humidity do not exceed -10
perfect seal; therefore, do not use or store to 40 degrees centigrade and 15 to 85%.
capacitors in a corrosive atmosphere, especially Use capacitors within 6 months after delivered.
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
moisture. Before cleaning, bonding, or molding this RESULT, WORST CASE, IN A SHORT CIRCUIT
product, verify that these processes do not affect AND CAUSE FUMING OR PARTIAL DISPERSION
product quality by testing the performance of a WHEN THE PRODUCT IS USED.
cleaned, bonded or molded product in the intended

■ !Caution (Soldering and Mounting)

1. Vibration and impact the bonded, molded or coated product in the intended
Do not expose a capacitor or its leads to equipment.
excessive shock or vibration during use. In case of the amount of applications, dryness/
2. Soldering hardening conditions of adhesives and molding resins
When soldering this product to a PCB/PWB, do not containing organic solvents (ethyl acetate, methyl
exceed the solder heat resistance Specifications of ethyl ketone, toluene, etc.) are unsuitable, the
the capacitor. Subjecting this product to excessive outer coating resin of a capacitor is damaged by the
heating could melt the internal junction solder and organic solvents and it may result, worst case, in a
may result in thermal shocks that can crack the short circuit.
ceramic element. The variation in thickness of adhesive, molding 5
When soldering capacitor with a soldering iron, it resin or coating may cause a outer coating resin
should be performed in the following conditions. cracking and/or ceramic element cracking of a capacitor
Temperature of iron-tip: 400 degrees C. max. in a temperature cycling.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
3. Bonding, resin molding and coating RESULT, WORST CASE, IN A SHORT CIRCUIT
Before bonding, molding or coating this product, AND CAUSE FUMING OR PARTIAL DISPERSION
verify that these processes do not affect the WHEN THE PRODUCT IS USED.
quality of capacitor by testing the performance of

■ !Caution (Handling)
Vibration and impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY

RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.

27
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors Notice

■ Notice (Soldering and Mounting)

Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or
less.
Rinsing time: 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.

■ Notice (Rating)
1. Capacitance change of capacitors 2. Performance check by equipment
(1) In case of SL char. Before using a capacitor, check that there is no
Capacitance might change a little depending on a problem in the equipment's performance and the
surrounding temperature or an applied voltage. specifications.
Please contact us if you use for the strict Generally speaking, CLASS 2 (B/E/F char.) ceramic
constant time circuit. capacitors have voltage dependence characteristics
(2) In case of B/E/F char. and temperature dependence characteristics in
Capacitors have an aging characteristic, whereby capacitance. So, the capacitance value may change
the capacitor continually decreases its depending on the operating condition in the equipment.
capacitance slightly if the capacitor is left on Therefore, be sure to confirm the apparatus
5 for a long time. Moreover, capacitance might change performance of receiving influence in the capacitance
greatly depending on the surrounding temperature or value change of a capacitor, such as leakage current
an applied voltage. So, it is not likely to be and noise suppression characteristic.
suitable for use in a constant time circuit. Moreover, check the surge-proof ability of a
Please contact us if you need detailed information. capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.

28
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DES Series (125 deg. C Guaranteed/Low-dissipation Factor/DC500V-1kV)

D max. T max.
■ Features
1. Low dissipation factor series which can be used for
power supplies with an increased switching

3.0 max.
e

frequency.

25.0 min.
2. The allowable power in the 100 to 300kHz band is
improved to approximately one-and-a-half times F±1.0
ød
that of DEH series while remaining the same size.
3. Operating temperature range is guaranteed up to 125 (in mm)

degree C. [Bulk] Lead Code Coating Extension e ød

4. Coated with flame-retardant epoxy resin Vertical Crimp Long (A2,A3) A2, A3 Up to the end of crimp 0.6±0.05

(equivalent to UL94V-0 standard).

5. Taping available for automatic insertion.
6. Available product for RoHS Restriction
D max. T max.
(EU Directive 2002/95/EC).

■ Applications

3.0 max.
e
Ideal for use on high frequency pulse circuits such as

1.0
3.5±0.5
snubber circuits for switching power supplies. ød

F±0.8

(in mm)

Lead Code Coating Extension e ød

[Bulk]
Vertical Crimp Short (J2,J3) J2, J3 Up to the end of crimp 0.6±0.05

■ Marking 6
Rated Voltage
DC500V DC1kV
Nominal Body Diameter

SD SD
ø6mm 101 101
66 1KV 66

SD SD
ø7-9mm 102K 471K
66 1KV 66

SD SD
222K 152K
ø10-17mm 1KV
66
66

Series Code Abbreviation (S)

Temperature Characteristic Marked with code
Nominal Capacitance Marked with 3 figures
Capacitance Tolerance Marked with code (omitted for nominal body diameter ø6mm)
Rated Voltage Marked with code (omitted for DC500V)
Manufacturer's Identification Marked with (omitted for nominal body diameter ø9mm and under)
Manufactured Date Code Abbreviation

29
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

D Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DESD32H101Kppp 500 100 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H151Kppp 500 150 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H221Kppp 500 220 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H331Kppp 500 330 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H471Kppp 500 470 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H681Kppp 500 680 ±10% 6 5.0 4.0 A2B J2B N2A
DESD32H102Kppp 500 1000 ±10% 8 5.0 4.0 A2B J2B N2A
DESD32H152Kppp 500 1500 ±10% 9 5.0 4.0 A2B J2B N2A
DESD32H222Kppp 500 2200 ±10% 10 5.0 4.0 A2B J2B N2A
DESD32H332Kppp 500 3300 ±10% 12 7.5 4.0 A3B J3B N3A
DESD32H472Kppp 500 4700 ±10% 14 7.5 4.0 A3B J3B N7A
DESD33A101Kppp 1000 100 ±10% 6 5.0 4.5 A2B J2B N2A
DESD33A151Kppp 1000 150 ±10% 6 5.0 4.5 A2B J2B N2A
DESD33A221Kppp 1000 220 ±10% 6 5.0 4.5 A2B J2B N2A
DESD33A331Kppp 1000 330 ±10% 6 5.0 4.5 A2B J2B N2A
DESD33A471Kppp 1000 470 ±10% 7 5.0 4.5 A2B J2B N2A
DESD33A681Kppp 1000 680 ±10% 8 5.0 4.5 A2B J2B N2A
DESD33A102Kppp 1000 1000 ±10% 9 5.0 4.5 A2B J2B N2A
DESD33A152Kppp 1000 1500 ±10% 10 5.0 4.5 A2B J2B N2A
DESD33A222Kppp 1000 2200 ±10% 12 7.5 4.5 A3B J3B N3A
DESD33A332Kppp 1000 3300 ±10% 14 7.5 4.5 A3B J3B N7A
DESD33A472Kppp 1000 4700 ±10% 17 7.5 4.5 A3B J3B N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

30
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DES Series Specifications and Test Methods

No. Item Specifications Testing Method

1 Operating Temperature Range -25 to +125°C

No marked defect on appearance form The capacitor should be visually inspected for evidence of
2 Appearance and Dimensions and dimensions are within specified defect.
range. Dimensions should be measured with slide calipers.
3 Marking To be easily legible The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1kV) or DC voltage of 250% of
Between Lead
No failure the rated voltage (DC500V) is applied between the lead wires
Wires
for 1 to 5 sec.
(Charge/Discharge current V 50mA)

Dielectric The capacitor is placed in the container with

4 metal balls of diameter 1mm so that each
Strength
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
Body Insulation No failure
right, and AC1250V(r.m.s.) <50/60Hz> is About 2mm

applied for 1 to 5 sec. between capacitor Metal balls

lead wires and metal balls.
(Charge/Discharge current V 50mA)
Insulation Between Lead The insulation resistance should be measured with
5 10000MΩ min.
Resistance (I.R.) Wires DC500±50V within 60±5 sec. of charging.
The capacitance should be measured at 20°C with 1±0.2kHz
6 Capacitance Within specified tolerance
and AC5V(r.m.s.) max.
The dissipation factor should be measured at 20°C with
7 Dissipation Factor (D.F.) 0.3% max.
1±0.2kHz and AC5V(r.m.s.) max.
Within +20/-30% The capacitance measurement should be made at each step
(Temp. range : -25 to +125°C) specified in Table.

8 Temperature Characteristics Pre-treatment : Capacitor should be stored at 125±3°C for 1 hr., then placed at
*room condition for 24±2 hrs. before measurements.
Step 1 2 3 4 5
Temp. (°C) 20±2 -25±3 20±2 125±2 20±2

As shown in the figure at right, fix the body of

the capacitor and apply a tensile weight
Pull gradually to each lead wire in the radial

9 Strength of Lead
Lead wire should not be cut off.
direction of the capacitor up to 10N and keep
it for 10±1 sec.
W
6
Capacitor should not be broken.
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
Bending
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Appearance No marked defect The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration Capacitance Within specified tolerance
10 total amplitude, with about a 1 minute rate of vibration change
Resistance
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
D.F. 0.3% max.
2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
Lead wire should be soldered with
sec. In both cases the depth of dipping is up to about 1.5 to
11 Solderability of Leads uniform coating on the axial direction
2mm from the root of lead wires.
over 3/4 of the circumferential direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Appearance No marked defect The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
Capacitance
Within ±10% 3.5±0.5 sec.
Change
Soldering Effect Pre-treatment:
12
(Non-Preheat) Capacitor should be stored at 125±3°C for 1 hr., then placed
Dielectric Strength
at *room condition for 24±2 hrs. before initial measurements.
(Between Lead Per item 4.
Post-treatment:
Wires)
Capacitor should be stored for 24±2 hrs. at *room condition.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

31
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DES Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect First the capacitor should be

stored at 120+0/-5°C for Thermal , Capacitor
Capacitance Screen, ,
Change
Within ±10% 60+0/-5 sec. ,
,,,,,,,,,, ,
,,,,,,
, 1.5
Then, as in figure, the lead wires ,,,,,,,,,, ,,,,
,
, to 2.0mm
should be immersed solder of ,
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm Solder
Soldering Effect
13 from the root of terminal for
(On-Preheat)
Dielectric Strength 7.5+0/-1 sec.
(Between Lead Per item 4. Pre-treatment:
Wires) Capacitor should be stored at 125±3°C for 1 hr., then placed
at *room condition for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 24±2 hrs. at *room condition.
Appearance No marked defect The capacitor should be subjected to 5 temperature cycles.
<Temperature cycle>
Capacitance
Within ±10% Step Temperature (°C) Time (min)
Change
1 -25±3 30
D.F. 0.4% max. 2 Room Temp. 3
I.R. 1000MΩ min. 3 125±3 30
Temperature
14 4 Room Temp. 3
Cycle
Cycle time: 5 cycle
Pre-treatment:
Dielectric Strength
Capacitor should be stored at 125±3°C for 1 hr., then placed
(Between Lead Per item 4.
at *room condition for 24±2 hrs. before initial measurements.
Wires)
Post-treatment:
Capacitor should be stored for 24±2 hrs. at *room condition.
Appearance No marked defect Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Capacitance
Within ±10% Pre-treatment:
Humidity (Under Change
15 Capacitor should be stored at 125±3°C for 1 hr., then placed
Steady State)
D.F. 0.4% max. at *room condition for 24±2 hrs. before initial measurements.
Post-treatment:
I.R. 1000MΩ min. Capacitor should be stored for 1 to 2 hrs. at *room condition.
Appearance No marked defect Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Capacitance
Within ±10% Pre-treatment:
Humidity Change
16 Capacitor should be stored at 125±3°C for 1 hr., then placed
Loading
6 D.F. 0.6% max. at *room condition for 24±2 hrs. before initial measurements.
Post-treatment:
I.R. 1000MΩ min. Capacitor should be stored for 1 to 2 hrs. at *room condition.
Appearance No marked defect Apply a DC voltage of 200% of the rated voltage (DC500V) or
DC voltage of 150% of the rated voltage (DC1kV) for 1000
Capacitance
Within ±10% +48/-0 hrs. at 125±2°C with a relative humidity of 50% max.
Change
(Charge/Discharge current V 50mA)
D.F. 0.4% max. Pre-treatment:
17 Life
Capacitor should be stored at 125±3°C for 1 hr., then placed
at *room condition for 24±2 hrs. before initial measurements.
I.R. 2000MΩ min. Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
at *room condition for 24±2 hrs.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

32
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DEH Series (125 deg. C Guaranteed/Low-dissipation Factor/DC250V-3.15kV)

<Fig. 1> <Fig. 2>

■ Features D max. T max. T max.

1. Reduced heat dissipation permitted due to small

dielectric loss of the ceramic material.

3.0 max.
e
2. Operating temperature range is guaranteed up to 125
degree C.

25.0 min.
25.0 min.
3. Coated with flame-retardant epoxy resin
F±1.0
ød
(equivalent to UL94V-0 standard).
4. Taping available for automatic insertion. (in mm)

5. Available product for RoHS Restriction [Bulk]

Lead Code Coating Extension e ød Style

Vertical Crimp Long (Fig. 1) A2, A3, A4 Up to the end of crimp 0.6±0.05 Fig. 1
(EU Directive 2002/95/EC).
Straight Long (Fig. 2) C3 3.0 max. 0.6±0.05 Fig. 2

■ Applications
Ideal for use on high frequency pulse circuits such as <Fig. 1> <Fig. 2>

a horizontal resonance circuit for CTV and snubber D max. T max. T max.

circuits for switching power supplies.

3.0 max.
e

5.0±1.0
5.0±1.0
ød

F±0.8
(in mm)

Lead Code Coating Extension e ød Style

[Bulk] B2, B3, B4 Up to the end of crimp 0.6±0.05 Fig. 1
Vertical Crimp Short (Fig. 1)
D3 3.0 max. 0.6±0.05 Fig. 2
Straight Short (Fig. 2)

■ Marking
Rated Voltage DC250V DC500V DC1-3.15kV

Nominal Temp. Char. R C R

Body Diameter

HR HR
ø6mm 102 471
66 66
7
HR R HR R
332K HR C
ø7-9mm 152K 102K
250V 1KV 66
66 66

HR R HR C HR R
103K 472K 272K
ø10-21mm 250V 3KV
66
66 66

High Temperature Guaranteed Code HR

Temperature Characteristics Marked with code (omitted for nominal body diameter ø6mm)
Nominal Capacitance Marked with 3 figures
Capacitance Tolerance Marked with code (omitted for nominal body diameter ø6mm)
Marked with code
DC250V
(Marked with horizontal line over nominal capacitance for nominal body diameter ø6mm)
Rated Voltage
DC500V Omitted
DC1-3.15kV Marked with code (In case of DC3.15kV, marked with 3KV)
Manufacturer's Identification Marked with (omitted for nominal body diameter ø9mm and under)
Manufactured Date Code Abbreviation

33
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DC250V, R Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEHR32E221Kppp 250 220 ±10% 6 5.0 4.0 A2B B2B N2A
DEHR32E331Kppp 250 330 ±10% 6 5.0 4.0 A2B B2B N2A
DEHR32E471Kppp 250 470 ±10% 6 5.0 4.0 A2B B2B N2A
DEHR32E681Kppp 250 680 ±10% 6 5.0 4.0 A2B B2B N2A
DEHR32E102Kppp 250 1000 ±10% 6 5.0 4.0 A2B B2B N2A
DEHR32E152Kppp 250 1500 ±10% 7 5.0 4.0 A2B B2B N2A
DEHR32E222Kppp 250 2200 ±10% 8 5.0 4.0 A2B B2B N2A
DEHR32E332Kppp 250 3300 ±10% 9 5.0 4.0 A2B B2B N2A
DEHR32E472Kppp 250 4700 ±10% 10 5.0 4.0 A2B B2B N2A
DEHR32E682Kppp 250 6800 ±10% 12 5.0 4.0 A2B B2B N2A
DEHR32E103Kppp 250 10000 ±10% 12 5.0 4.0 A2B B2B N2A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

DC500V, C Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEHC32H331Kppp 500 330 ±10% 6 5.0 4.0 A2B B2B N2A
DEHC32H471Kppp 500 470 ±10% 6 5.0 4.0 A2B B2B N2A
DEHC32H681Kppp 500 680 ±10% 7 5.0 4.0 A2B B2B N2A
DEHC32H102Kppp 500 1000 ±10% 8 5.0 4.0 A2B B2B N2A
DEHC32H152Kppp 500 1500 ±10% 9 5.0 4.0 A2B B2B N2A
DEHC32H222Kppp 500 2200 ±10% 10 5.0 4.0 A2B B2B N2A
DEHC32H332Kppp 500 3300 ±10% 12 5.0 4.0 A2B B2B N2A
DEHC32H472Kppp 500 4700 ±10% 14 10.0 4.0 A4B B4B -
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

DC1-3.15kV, R Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEHR33A221Kppp 1000 220 ±10% 7 5.0 4.5 A2B B2B N2A
7 DEHR33A331Kppp 1000 330 ±10% 7 5.0 4.5 A2B B2B N2A
DEHR33A471Kppp 1000 470 ±10% 7 5.0 4.5 A2B B2B N2A
DEHR33A681Kppp 1000 680 ±10% 8 5.0 4.5 A2B B2B N2A
DEHR33A102Kppp 1000 1000 ±10% 9 5.0 4.5 A2B B2B N2A
DEHR33A152Kppp 1000 1500 ±10% 11 5.0 4.5 A2B B2B N2A
DEHR33A222Kppp 1000 2200 ±10% 13 7.5 4.5 A3B B3B N3A
DEHR33A332Kppp 1000 3300 ±10% 15 7.5 4.5 A3B B3B N7A
DEHR33A472Kppp 1000 4700 ±10% 17 7.5 4.5 A3B B3B N7A
DEHR33D221Kppp 2000 220 ±10% 7 7.5 5.0 C3B D3B P3A
DEHR33D271Kppp 2000 270 ±10% 7 7.5 5.0 C3B D3B P3A
DEHR33D331Kppp 2000 330 ±10% 8 7.5 5.0 A3B B3B N3A
DEHR33D391Kppp 2000 390 ±10% 8 7.5 5.0 A3B B3B N3A
DEHR33D471Kppp 2000 470 ±10% 9 7.5 5.0 A3B B3B N3A
DEHR33D561Kppp 2000 560 ±10% 9 7.5 5.0 A3B B3B N3A
DEHR33D681Kppp 2000 680 ±10% 10 7.5 5.0 A3B B3B N3A
DEHR33D821Kppp 2000 820 ±10% 11 7.5 5.0 A3B B3B N3A
DEHR33D102Kppp 2000 1000 ±10% 12 7.5 5.0 A3B B3B N3A
DEHR33D122Kppp 2000 1200 ±10% 12 7.5 5.0 A3B B3B N3A
DEHR33D152Kppp 2000 1500 ±10% 12 7.5 5.0 A3B B3B N3A
DEHR33D182Kppp 2000 1800 ±10% 14 7.5 5.0 A3B B3B N7A
Continued on the following page.
34
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1
Continued from the preceding page.

DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEHR33D222Kppp 2000 2200 ±10% 15 7.5 5.0 A3B B3B N7A
DEHR33D272Kppp 2000 2700 ±10% 17 7.5 5.0 A3B B3B N7A
DEHR33D332Kppp 2000 3300 ±10% 19 10.0 5.0 A4B B4B -
DEHR33D392Kppp 2000 3900 ±10% 20 10.0 5.0 A4B B4B -
DEHR33D472Kppp 2000 4700 ±10% 21 10.0 5.0 A4B B4B -
DEHR33F151Kppp 3150 150 ±10% 7 7.5 6.0 C3B D3B P3A
DEHR33F181Kppp 3150 180 ±10% 7 7.5 6.0 C3B D3B P3A
DEHR33F221Kppp 3150 220 ±10% 7 7.5 6.0 C3B D3B P3A
DEHR33F271Kppp 3150 270 ±10% 7 7.5 6.0 C3B D3B P3A
DEHR33F331Kppp 3150 330 ±10% 8 7.5 6.0 A3B B3B N3A
DEHR33F391Kppp 3150 390 ±10% 9 7.5 6.0 A3B B3B N3A
DEHR33F471Kppp 3150 470 ±10% 10 7.5 6.0 A3B B3B N3A
DEHR33F561Kppp 3150 560 ±10% 10 7.5 6.0 A3B B3B N3A
DEHR33F681Kppp 3150 680 ±10% 11 7.5 6.0 A3B B3B N3A
DEHR33F821Kppp 3150 820 ±10% 12 7.5 6.0 A3B B3B N3A
DEHR33F102Kppp 3150 1000 ±10% 13 7.5 6.0 A3B B3B N3A
DEHR33F122Kppp 3150 1200 ±10% 14 7.5 6.0 A3B B3B N7A
DEHR33F152Kppp 3150 1500 ±10% 15 7.5 6.0 A3B B3B N7A
DEHR33F182Kppp 3150 1800 ±10% 16 7.5 6.0 A3B B3B N7A
DEHR33F222Kppp 3150 2200 ±10% 17 7.5 6.0 A3B B3B N7A
DEHR33F272Kppp 3150 2700 ±10% 19 10.0 6.0 A4B B4B -
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

35
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEH Series Specifications and Test Methods

No. Item Specifications Testing Method

1 Operating Temperature Range -25 to +125°C

No marked defect on appearance form
The capacitor should be visually inspected for evidence of
2 Appearance and Dimensions and dimensions are within specified
defect. Dimensions should be measured with slide calipers.
range.
3 Marking To be easily legible The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
200% of the rated voltage (DC1 to 3.15kV) or DC voltage of
Between Lead
No failure 250% of the rated voltage (DC250V, DC500V) is applied
Wires
between the lead wires for 1 to 5 sec.
(Charge/Discharge current V 50mA)

Dielectric The capacitor is placed in the container with

4 metal balls of diameter 1mm so that each
Strength
lead wire, short circuited, is kept about 2mm
off the metal balls as shown in the figure at
Body Insulation No failure
right, and AC1250V(r.m.s.) <50/60Hz> is About 2mm

applied for 1 to 5 sec. between capacitor Metal balls

lead wires and metal balls.
(Charge/Discharge current V 50mA)
Char. R [DC1 to 3.15kV], Char. C The insulation resistance should be measured with
Insulation Between Lead
5 : 10000MΩ min. DC500±50V (Char. R [DC 250V]: DC100±15V) within
Resistance (I.R.) Wires
Char. R [DC250V] : 1000MΩ min. 60±5 sec. of charging.
The capacitance should be measured at 20°C with 1±0.2kHz
6 Capacitance Within specified tolerance
and AC5V(r.m.s.) max.
Char. R [DC250V] : 0.4% max.
The dissipation factor should be measured at 20°C with
7 Dissipation Factor (D.F.) Char. R [DC1 to 3.15kV] : 0.2% max.
1±0.2kHz and AC5V(r.m.s.) max.
Char. C : 0.3% max.

Temp. Char. The capacitance measurement should be made at each step

T. C. specified in Table.
-25 to +85°C +85 to +125°C
R Within ±15%
Within +15/-30%
C Within ±20%
8 Temperature Characteristics
Pre-treatment : Capacitor should be stored at 125±3°C for 1 hr., then placed at
*1room condition for 24±2 hrs. before measurements.
Step 1 2 3 4 5
Temp. (°C) 20±2 -25±3 20±2 125±2 20±2

As shown in the figure at right, fix the body of

the capacitor and apply a tensile weight
gradually to each lead wire in the radial
Pull
direction of the capacitor up to 10N (5N for
W
lead diameter 0.5mm), and keep it for 10±1
Lead wire should not be cut off. sec.
9 Strength of Lead
Capacitor should not be broken.
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
7 Bending in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Appearance No marked defect
The capacitor should be firmly soldered to the supporting lead
Capacitance Within specified tolerance wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration
10 total amplitude, with about a 1 minute rate of vibration change
Resistance Char. R [DC250V] : 0.4% max.
from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
D.F. Char. R [DC1 to 3.15kV] : 0.2% max.
2 hrs. each in 3 mutually perpendicular directions.
Char. C : 0.3% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
Lead wire should be soldered with
sec. In both cases the depth of dipping is up to about 1.5 to
11 Solderability of Leads uniform coating on the axial direction
2mm from the root of lead wires.
over 3/4 of the circumferential direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

36
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEH Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
Capacitance
Within ±10% 3.5±0.5 sec.
Change
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
Soldering Effect at *room condition for 24±2 hrs. before initial measurements.
12
(Non-Preheat) Post-treatment:
Dielectric Strength
Capacitor should be stored for 24±2 hrs. at *room condition.
(Between Lead Per item 4.
Measurement order:
Wires)
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance • Dielectric strength (Char. R [DC250V])
Appearance No marked defect First the capacitor should be
stored at 120+0/-5°C for Thermal , Capacitor
Capacitance Screen, ,
Change
Within ±10% 60+0/-5 sec. ,
,,,,,,,,,, ,
, 1.5
,,,,,,
Then, as in figure, the lead wires ,,,,,,,,,, ,,,,
,
, to 2.0mm
should be immersed solder of ,
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm Solder
from the root of terminal for
7.5+0/-1 sec.
Soldering Effect
13 Pre-treatment:
(On-Preheat)
Dielectric Strength Capacitor should be stored at 125±3°C for 1 hr., then placed
(Between Lead Per item 4. at *room condition for 24±2 hrs. before initial measurements.
Wires) Post-treatment:
Capacitor should be stored for 24±2 hrs. at *room condition.
Measurement order:
Dielectric strength -> Pre-treatment -> Capacitance ->
Soldering effect test -> Post-treatment ->
Capacitance • Dielectric strength (Char. R [DC250V])
Appearance No marked defect The capacitor should be subjected to 5 temperature cycles.
<Temperature cycle>
Capacitance
Within ±10% Step Temperature (°C) Time (min)
Change
1 -25±3 30
D.F. 0.4% max. 2 Room Temp. 3
I.R. 1000MΩ min. 3 125±3 30
4 Room Temp. 3
Cycle time: 5 cycle
Temperature Pre-treatment:
14
Cycle Capacitor should be stored at 125±3°C for 1 hr., then placed
at *1room condition for 24±2 hrs. before initial measurements.
Dielectric Strength Post-treatment:
(Between Lead Per item 4. Capacitor should be stored for 24±2 hrs. at *1room condition.
Wires) Measurement order:
I.R. • Dielectric strength -> Pre-treatment -> Capacitance •
D.F. -> Temperature cycle test -> Post-treatment ->
Capacitance • D.F. • I.R. • Dielectric strength
(Char. R [DC250V])
7
Appearance No marked defect Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Capacitance
Within ±10% Pre-treatment:
Change
Capacitor should be stored at 125±3°C for 1 hr., then placed
D.F. 0.4% max. at *1room condition for 24±2 hrs. before initial measurements.
Humidity (Under
15 Post-treatment:
Steady State)
Capacitor should be stored for 1 to 2 hrs. at *1room condition.
Measurement order:
I.R. 1000MΩ min. I.R. -> Pre-treatment -> Capacitance • D.F. -> Humidity test ->
Post-treatment -> Capacitance • D.F. • I.R.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

37
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEH Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge currentV50mA)
Capacitance
Within ±10% Pre-treatment:
Change
Capacitor should be stored at 125±3°C for 1 hr., then placed at
D.F. 0.6% max. *1room condition for 24±2 hrs. before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at *1room condition.
Humidity
16 (Char. R [DC1 to 3.15kV], Char. C)
Loading
Post-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
I.R. 1000MΩ min. at *1room condition for 24±2 hrs. (Char. R [DC250V])
Measurement order:
I.R. -> Pre-treatment -> Capacitance • D.F. ->
Humidity loading test -> *2 I.R. -> Post-treatment ->
Capacitance • D.F. (Char. R [DC250V])
Appearance No marked defect Apply a DC voltage of 200% of the rated voltage (DC250V,
DC500V) or DC voltage of 150% of the rated voltage (DC1 to
Capacitance
Within ±10% 3.15kV) for 1000 +48/-0 hrs. at 125±2°C with a relative
Change
humidity of 50% max.
D.F. 0.4% max. (Charge/Discharge currentV50mA)
Pre-treatment:
Capacitor should be stored at 125±3°C for 1 hr., then placed
17 Life at *1room condition for 24±2 hrs. before initial measurements.
Post-treatment:
Char. R [DC1 to 3.15kV], Char. C Capacitor should be stored at 125±3°C for 1 hr., then placed
I.R. : 2000MΩ min. at *1room condition for 24±2 hrs.
Char. R [DC250V] : 1000MΩ min. Measurement order:
I.R. -> Pre-treatment -> Capacitance • D.F. -> Life test ->
*3I.R. -> Post-treatment -> Capacitance • D.F.
(Char. R [DC250V])
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 The measurement of I.R. will be held in 1 to 2 hrs. after Humidity loading test.
*3 The measurement of I.R. will be held in 12 to 24 hrs. after Life test.

38
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DEA Series (125 deg. C Guaranteed/Class 1/DC1k-3.15kV)

<Fig. 1> <Fig. 2>

D max. T max. T max.
■ Features
1. Temperature compensating type ceramics realize low
heat dissipation than DEH/DES series.

3.0 max.
e

2. Operating temperature range is guaranteed up to 125

25.0 min.
25.0 min.
degree C.
3. Coated with flame-retardant epoxy resin F±1.0
ød
(equivalent to UL94V-0 standard). (in mm)

4. Taping available for automatic insertion. Lead Code Coating Extension e ød Style

5. Available product for RoHS Restriction [Bulk] A2, A3 Up to the end of crimp 0.6±0.05 Fig. 1

Vertical Crimp Long (Fig. 1) C1, CD 3.0 max. 0.5±0.05 Fig. 2

(EU Directive 2002/95/EC).
Straight Long (Fig. 2) C3 3.0 max. 0.6±0.05 Fig. 2

■ Applications
1. Ideal for use as the ballast in back lighting <Fig. 1> <Fig. 2>
D max. T max. T max.
inverters for liquid crystal display.
2. Ideal for use on high frequency pulse circuits such
as a horizontal resonance circuit for CTV and snubber

3.0 max.
e
circuits for switching power supplies.

5.0±1.0
5.0±1.0
ød

F±0.8
(in mm)

Lead Code Coating Extension e ød Style

B2, B3 Up to the end of crimp 0.6±0.05 Fig. 1
[Bulk] D1, DD 3.0 max. 0.5±0.05 Fig. 2
Vertical Crimp Short (Fig. 1)
D3 3.0 max. 0.6±0.05 Fig. 2
Straight Short (Fig. 2)

■ Marking
Temp. Char.
SL
Nominal Body Diameter

68
ø4.5-5mm 1KV

39
ø6mm 3KV
66

181J
ø7-9mm 2KV
66

391J
3KV
8
ø10-16mm
66

Nominal Capacitance Under 100pF : Actual value, 100pF and over : Marked with 3 figures
Capacitance Tolerance Marked with code (omitted for nominal body diameter ø6mm and under)
Rated Voltage Marked with code (In case of DC3.15kV, marked with 3KV)
Manufacturer's Identification Marked with (omitted for nominal body diameter ø9mm and under)
Manufactured Date Code Abbreviation (omitted for nominal body diameter ø5mm and under)

39
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

SL Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEA1X3A100Jppp 1000 10 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A120Jppp 1000 12 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A150Jppp 1000 15 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A180Jppp 1000 18 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A220Jppp 1000 22 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A270Jppp 1000 27 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A330Jppp 1000 33 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A390Jppp 1000 39 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A470Jppp 1000 47 ±5% 4.5 5.0 4.0 C1B D1B P2A
DEA1X3A560Jppp 1000 56 ±5% 5 5.0 4.0 C1B D1B P2A
DEA1X3A680Jppp 1000 68 ±5% 5 5.0 4.0 C1B D1B P2A
DEA1X3A820Jppp 1000 82 ±5% 6 5.0 4.0 A2B B2B N2A
DEA1X3A101Jppp 1000 100 ±5% 6 5.0 4.0 A2B B2B N2A
DEA1X3A121Jppp 1000 120 ±5% 6 5.0 4.0 A2B B2B N2A
DEA1X3A151Jppp 1000 150 ±5% 7 5.0 4.0 A2B B2B N2A
DEA1X3A181Jppp 1000 180 ±5% 7 5.0 4.0 A2B B2B N2A
DEA1X3A221Jppp 1000 220 ±5% 8 5.0 4.0 A2B B2B N2A
DEA1X3A271Jppp 1000 270 ±5% 9 5.0 4.0 A2B B2B N2A
DEA1X3A331Jppp 1000 330 ±5% 10 5.0 4.0 A2B B2B N2A
DEA1X3A391Jppp 1000 390 ±5% 10 5.0 4.0 A2B B2B N2A
DEA1X3A471Jppp 1000 470 ±5% 11 5.0 4.0 A2B B2B N2A
DEA1X3A561Jppp 1000 560 ±5% 12 7.5 4.0 A3B B3B N3A
DEA1X3D100Jppp 2000 10 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D120Jppp 2000 12 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D150Jppp 2000 15 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D180Jppp 2000 18 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D220Jppp 2000 22 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D270Jppp 2000 27 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D330Jppp 2000 33 ±5% 4.5 5.0 5.0 C1B D1B P2A
DEA1X3D390Jppp 2000 39 ±5% 5 5.0 5.0 C1B D1B P2A
DEA1X3D470Jppp 2000 47 ±5% 6 5.0 5.0 A2B B2B N2A
DEA1X3D560Jppp 2000 56 ±5% 6 5.0 5.0 A2B B2B N2A
DEA1X3D680Jppp 2000 68 ±5% 6 5.0 5.0 A2B B2B N2A
DEA1X3D820Jppp 2000 82 ±5% 7 5.0 5.0 A2B B2B N2A
DEA1X3D101Jppp 2000 100 ±5% 7 5.0 5.0 A2B B2B N2A
DEA1X3D121Jppp 2000 120 ±5% 8 5.0 5.0 A2B B2B N2A
DEA1X3D151Jppp 2000 150 ±5% 8 5.0 5.0 A2B B2B N2A
DEA1X3D181Jppp 2000 180 ±5% 9 5.0 5.0 A2B B2B N2A
DEA1X3D221Jppp 2000 220 ±5% 10 5.0 5.0 A2B B2B N2A
DEA1X3D271Jppp 2000 270 ±5% 11 5.0 5.0 A2B B2B N2A
8 DEA1X3D331Jppp 2000 330 ±5% 12 7.5 5.0 A3B B3B N3A
DEA1X3D391Jppp 2000 390 ±5% 13 7.5 5.0 A3B B3B N3A
DEA1X3D471Jppp 2000 470 ±5% 14 7.5 5.0 A3B B3B N7A
DEA1X3D561Jppp 2000 560 ±5% 15 7.5 5.0 A3B B3B N7A
DEA1X3F100Jppp 3150 10 ±5% 5 7.5 6.0 CDB DDB P3A
DEA1X3F120Jppp 3150 12 ±5% 5 7.5 6.0 CDB DDB P3A
DEA1X3F150Jppp 3150 15 ±5% 5 7.5 6.0 CDB DDB P3A
DEA1X3F180Jppp 3150 18 ±5% 5 7.5 6.0 CDB DDB P3A
DEA1X3F220Jppp 3150 22 ±5% 5 7.5 6.0 CDB DDB P3A
DEA1X3F270Jppp 3150 27 ±5% 6 7.5 6.0 C3B D3B P3A
DEA1X3F330Jppp 3150 33 ±5% 6 7.5 6.0 C3B D3B P3A
DEA1X3F390Jppp 3150 39 ±5% 6 7.5 6.0 C3B D3B P3A
DEA1X3F470Jppp 3150 47 ±5% 7 7.5 6.0 C3B D3B P3A
DEA1X3F560Jppp 3150 56 ±5% 7 7.5 6.0 C3B D3B P3A
Continued on the following page.
40
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1
Continued from the preceding page.

DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEA1X3F680Jppp 3150 68 ±5% 8 7.5 6.0 A3B B3B N3A
DEA1X3F820Jppp 3150 82 ±5% 8 7.5 6.0 A3B B3B N3A
DEA1X3F101Jppp 3150 100 ±5% 9 7.5 6.0 A3B B3B N3A
DEA1X3F121Jppp 3150 120 ±5% 10 7.5 6.0 A3B B3B N3A
DEA1X3F151Jppp 3150 150 ±5% 11 7.5 6.0 A3B B3B N3A
DEA1X3F181Jppp 3150 180 ±5% 11 7.5 6.0 A3B B3B N3A
DEA1X3F221Jppp 3150 220 ±5% 12 7.5 6.0 A3B B3B N3A
DEA1X3F271Jppp 3150 270 ±5% 14 7.5 6.0 A3B B3B N7A
DEA1X3F331Jppp 3150 330 ±5% 15 7.5 6.0 A3B B3B N7A
DEA1X3F391Jppp 3150 390 ±5% 16 7.5 6.0 A3B B3B N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

41
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEA Series Specifications and Test Methods

No. Item Specifications Testing Method

1 Operating Temperature Range -25 to +125°C

No marked defect on appearance form
The capacitor should be visually inspected for evidence of
2 Appearance and Dimensions and dimensions are within specified
defect. Dimensions should be measured with slide calipers.
range.
3 Marking To be easily legible The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
Between Lead
No failure 200% of the rated voltage is applied between the lead wires for
Wires
1 to 5 sec. (Charge/Discharge currentV50mA)
The capacitor is placed in the container with
Dielectric metal balls of diameter 1mm so that each
4 lead wire, short circuited, is kept about 2mm
Strength
off the metal balls as shown in the figure at
Body Insulation No failure
right, and AC1250V(r.m.s.) <50/60Hz> is About 2mm

applied for 1 to 5 sec. between capacitor Metal balls

lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation Between Lead The insulation resistance should be measured with
5 10000MΩ min.
Resistance (I.R.) Wires DC500±50V within 60±5 sec. of charging.
The capacitance should be measured at 20°C with 1±0.2MHz
6 Capacitance Within specified tolerance
and AC5V(r.m.s.) max.
400+20C*2min. (30pF under) The Q should be measured at 20°C with 1±0.2MHz and
7 Q
1000 min. (30pF min.) AC5V(r.m.s.) max.
+350 to -1000ppm/°C The capacitance measurement should be made at each step
(Temp. range: +20 to +85°C) specified in Table.
8 Temperature Characteristics
Step 1 2 3 4 5
Temp. (°C) 20±2 -25±3 20±2 85±2 20±2

As shown in the figure at right, fix the body of

the capacitor and apply a tensile weight
gradually to each lead wire in the radial
Pull
direction of the capacitor up to 10N (5N for
W
lead diameter 0.5mm), and keep it for 10±1
Lead wire should not be cut off. sec.
9 Strength of Lead
Capacitor should not be broken.
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
Bending in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Appearance No marked defect The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration Capacitance Within specified tolerance
10 total amplitude, with about a 1 minute rate of vibration change
Resistance
400+20C*2min. (30pF under) from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
Q
1000 min. (30pF min.) 2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
Lead wire should be soldered with
sec. In both cases the depth of dipping is up to about 1.5 to
11 Solderability of Leads uniform coating on the axial direction
2mm from the root of lead wires.
over 3/4 of the circumferential direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Appearance No marked defect
The lead wire should be immersed into the melted solder of
8 Capacitance 350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
Within ±2.5%
Soldering Effect Change to 2mm from the main body for 3.5±0.5 sec.
12
(Non-Preheat) (Body of ø5mm and under: 5±0.5 sec.)
Dielectric Strength
Post-treatment:
(Between Lead Per item 4.
Capacitor should be stored for 1 to 2 hrs. at *1room condition.
Wires)
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF)

Continued on the following page.

42
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEA Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect First the capacitor should be

stored at 120+0/-5°C for Thermal , Capacitor
Capacitance Screen, ,
Within ±2.5% 60+0/-5 sec. ,
,,,,,,,,,, ,
Change
Then, as in figure, the lead wires ,,,,,,,,,,,,,,,,, 1.5
,,,,
,
, to 2.0mm
Soldering Effect should be immersed solder of ,
13 ,,,Molten
(On-Preheat) 260+0/-5°C up to 1.5 to 2.0mm Solder
Dielectric Strength
from the root of terminal for
(Between Lead Per item 4.
7.5+0/-1 sec.
Wires)
Post-treatment:
Capacitor should be stored for 1 to 2 hrs. at *1room condition.
Appearance No marked defect
The capacitor should be subjected to 5 temperature cycles.
Capacitance <Temperature cycle>
Within ±5%
Change Step Temperature (°C) Time (min)
275+5/2C*2min. (30pF under) 1 -25±3 30
Temperature Q 2 Room Temp. 3
14 350 min. (30pF min.)
Cycle 3 125±3 30
I.R. 1000MΩ min. 4 Room Temp. 3
Cycle time: 5 cycle
Dielectric Strength
Post-treatment:
(Between Lead Per item 4.
Capacitor should be stored for 1 to 2 hrs. at *1room condition.
Wires)
Appearance No marked defect
Capacitance Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
Within ±5% relative humidity.
Humidity (Under Change
15
Steady State) 275+5/2C*2min. (30pF under)
Q Post-treatment:
350 min. (30pF min.) Capacitor should be stored for 1 to 2 hrs. at *1room condition.
I.R. 1000MΩ min.
Appearance No marked defect
Capacitance Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to
Within ±5% 95% relative humidity.
Humidity Change
16 (Charge/Discharge currentV50mA)
Loading 275+5/2C*2min. (30pF under)
Q Post-treatment:
350 min. (30pF min.) Capacitor should be stored for 1 to 2 hrs. at *1room condition.
I.R. 1000MΩ min.
Appearance No marked defect
Capacitance Apply a DC voltage of 150% of the rated voltage for
Within ±3% 1000 +48/-0 hrs. at 125±2°C with a relative humidity of 50%
Change
17 Life max. (Charge/Discharge currentV50mA)
275+5/2C*2min. (30pF under) Post-treatment:
Q
350 min. (30pF min.) Capacitor should be stored for 1 to 2 hrs. at *1room condition.
I.R. 2000MΩ min.
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF)

43
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DEB Series (Class 2/DC1k-3.15kV)

<Fig. 1> <Fig. 2>

D max. T max. T max.
■ Features
1. Small size and high capacitance
2. Coated with flame-retardant epoxy resin

3.0 max.
e

(equivalent to UL94V-0 standard).

25.0 min.
25.0 min.
3. Taping available for automatic insertion.
4. Available product for RoHS Restriction F±1.0
ød
(EU Directive 2002/95/EC). (in mm)

Lead Code Coating Extension e ød Style

■ Applications [Bulk] A2, A3 Up to the end of crimp 0.6±0.05 Fig. 1

Vertical Crimp Long (Fig. 1) C1, CD 3.0 max. 0.5±0.05 Fig. 2

Ideal for use on decoupling circuits for power
Straight Long (Fig. 2) C3 3.0 max. 0.6±0.05 Fig. 2
supplies.

<Fig. 1> <Fig. 2>

D max. T max. T max.

3.0 max.
e

5.0±1.0
5.0±1.0
ød

F±0.8
(in mm)

Lead Code Coating Extension e ød Style

B2, B3 Up to the end of crimp 0.6±0.05 Fig. 1
[Bulk] D1, DD 3.0 max. 0.5±0.05 Fig. 2
Vertical Crimp Short (Fig. 1)
D3 3.0 max. 0.6±0.05 Fig. 2
Straight Short (Fig. 2)

■ Marking
Temp. Char.
B E F
Nominal Body Diameter

221 102 102

ø4.5-5mm 3KV 1KV 2KV

331 102 222

ø6mm 3KV 2KV 1KV
66 66 66

102K 102Z 472Z

ø7-9mm 3KV 3KV 2KV
66 66 66

B E 103Z
332K 472Z 2KV
ø10-16mm 3KV 3KV 66
66 66

Temperature Characteristics Marked with code for char. B and E (omitted for nominal body diameter ø9mm and under)
Nominal Capacitance Marked with 3 figures
Capacitance Tolerance Marked with code (omitted for nominal body diameter ø6mm and under)

9 Rated Voltage Marked with code (In case of DC3.15kV, marked with 3KV)
Manufacturer's Identification Marked with (omitted for nominal body diameter ø9mm and under)
Manufactured Date Code Abbreviation (omitted for nominal body diameter ø5mm and under)

44
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

B Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEBB33A101Kppp 1000 100 ±10% 4.5 5.0 4.0 C1B D1B P2A
DEBB33A151Kppp 1000 150 ±10% 4.5 5.0 4.0 C1B D1B P2A
DEBB33A221Kppp 1000 220 ±10% 4.5 5.0 4.0 C1B D1B P2A
DEBB33A331Kppp 1000 330 ±10% 4.5 5.0 4.0 C1B D1B P2A
DEBB33A471Kppp 1000 470 ±10% 5 5.0 4.0 C1B D1B P2A
DEBB33A681Kppp 1000 680 ±10% 6 5.0 4.0 A2B B2B N2A
DEBB33A102Kppp 1000 1000 ±10% 6 5.0 4.0 A2B B2B N2A
DEBB33A152Kppp 1000 1500 ±10% 8 5.0 4.0 A2B B2B N2A
DEBB33A222Kppp 1000 2200 ±10% 9 5.0 4.0 A2B B2B N2A
DEBB33A332Kppp 1000 3300 ±10% 10 5.0 4.0 A2B B2B N2A
DEBB33A472Kppp 1000 4700 ±10% 12 7.5 4.0 A3B B3B N3A
DEBB33A682Kppp 1000 6800 ±10% 15 7.5 4.0 A3B B3B N7A
DEBB33D101Kppp 2000 100 ±10% 4.5 5.0 5.0 C1B D1B P2A
DEBB33D151Kppp 2000 150 ±10% 4.5 5.0 5.0 C1B D1B P2A
DEBB33D221Kppp 2000 220 ±10% 4.5 5.0 5.0 C1B D1B P2A
DEBB33D331Kppp 2000 330 ±10% 5 5.0 5.0 C1B D1B P2A
DEBB33D471Kppp 2000 470 ±10% 6 5.0 5.0 A2B B2B N2A
DEBB33D681Kppp 2000 680 ±10% 7 5.0 5.0 A2B B2B N2A
DEBB33D102Kppp 2000 1000 ±10% 8 5.0 5.0 A2B B2B N2A
DEBB33D152Kppp 2000 1500 ±10% 9 5.0 5.0 A2B B2B N2A
DEBB33D222Kppp 2000 2200 ±10% 10 5.0 5.0 A2B B2B N2A
DEBB33D332Kppp 2000 3300 ±10% 12 7.5 5.0 A3B B3B N3A
DEBB33D472Kppp 2000 4700 ±10% 15 7.5 5.0 A3B B3B N7A
DEBB33F101Kppp 3150 100 ±10% 5 7.5 6.0 CDB DDB P3A
DEBB33F151Kppp 3150 150 ±10% 5 7.5 6.0 CDB DDB P3A
DEBB33F221Kppp 3150 220 ±10% 5 7.5 6.0 CDB DDB P3A
DEBB33F331Kppp 3150 330 ±10% 6 7.5 6.0 C3B D3B P3A
DEBB33F471Kppp 3150 470 ±10% 7 7.5 6.0 C3B D3B P3A
DEBB33F681Kppp 3150 680 ±10% 8 7.5 6.0 A3B B3B N3A
DEBB33F102Kppp 3150 1000 ±10% 9 7.5 6.0 A3B B3B N3A
DEBB33F152Kppp 3150 1500 ±10% 11 7.5 6.0 A3B B3B N3A
DEBB33F222Kppp 3150 2200 ±10% 13 7.5 6.0 A3B B3B N3A
DEBB33F332Kppp 3150 3300 ±10% 15 7.5 6.0 A3B B3B N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

E Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEBE33A102Zppp 1000 1000 +80/-20% 5 5.0 4.0 C1B D1B P2A
DEBE33A222Zppp 1000 2200 +80/-20% 7 5.0 4.0 A2B B2B N2A
DEBE33A472Zppp 1000 4700 +80/-20% 9 5.0 4.0 A2B B2B N2A
DEBE33A103Zppp 1000 10000 +80/-20% 13 7.5 4.0 A3B B3B N3A
DEBE33D102Zppp 2000 1000 +80/-20% 6 5.0 5.0 A2B B2B N2A
DEBE33D222Zppp 2000 2200 +80/-20% 8 5.0 5.0 A2B B2B N2A
DEBE33D472Zppp 2000 4700 +80/-20% 11 5.0 5.0 A2B B2B N2A 9
DEBE33D103Zppp 2000 10000 +80/-20% 16 7.5 5.0 A3B B3B N7A
DEBE33F102Zppp 3150 1000 +80/-20% 7 7.5 6.0 C3B D3B P3A
DEBE33F222Zppp 3150 2200 +80/-20% 10 7.5 6.0 A3B B3B N3A
DEBE33F472Zppp 3150 4700 +80/-20% 13 7.5 6.0 A3B B3B N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

45
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

F Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T Lead Lead Lead
Part Number Voltage Package Package Package
(Vdc) (pF) (mm) (mm) (mm) Long Bulk Short Bulk Taping
DEBF33A222Zppp 1000 2200 +80/-20% 6 5.0 4.0 A2B B2B N2A
DEBF33A472Zppp 1000 4700 +80/-20% 7 5.0 4.0 A2B B2B N2A
DEBF33A103Zppp 1000 10000 +80/-20% 10 5.0 4.0 A2B B2B N2A
DEBF33D102Zppp 2000 1000 +80/-20% 5 5.0 5.0 C1B D1B P2A
DEBF33D222Zppp 2000 2200 +80/-20% 7 5.0 5.0 A2B B2B N2A
DEBF33D472Zppp 2000 4700 +80/-20% 9 5.0 5.0 A2B B2B N2A
DEBF33D103Zppp 2000 10000 +80/-20% 12 7.5 5.0 A3B B3B N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the three columns on the right for the appropriate code.

46
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEB Series Specifications and Test Methods

No. Item Specifications Testing Method

1 Operating Temperature Range -25 to +85°C

No marked defect on appearance form
The capacitor should be visually inspected for evidence of
2 Appearance and Dimensions and dimensions are within specified
defect. Dimensions should be measured with slide calipers.
range.
3 Marking To be easily legible The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
Between Lead
No failure 200% of the rated voltage is applied between the lead wires for
Wires
1 to 5 sec. (Charge/Discharge currentV50mA)
The capacitor is placed in the container
Dielectric with metal balls of diameter 1mm so that
4 each lead wire, short circuited, is kept
Strength
about 2mm off the metal balls as shown in
Body Insulation No failure
the figure at right, and DC voltage of 1.3kV About 2mm

is applied for 1 to 5 sec. between capacitor Metal balls

lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation Between Lead The insulation resistance should be measured with
5 10000MΩ min.
Resistance (I.R.) Wires DC500±50V within 60±5 sec. of charging.
The capacitance should be measured at 20°C with 1±0.2kHz
6 Capacitance Within specified tolerance
and AC5V(r.m.s.) max.
Char. B, E: 2.5% max. The dissipation factor should be measured at 20°C with
7 Dissipation Factor (D.F.)
Char. F: 5.0% max. 1±0.2kHz and AC5V(r.m.s.) max.
Char. B: Within ±10% The capacitance measurement should be made at each step
Char. E: Within +20/-55% specified in Table.
Char. F: Within +30/-80%
8 Temperature Characteristics
Pre-treatment : Capacitor should be stored at 85±2°C for 1 hr., then placed at
*room condition for 24±2 hrs. before measurements.
Step 1 2 3 4 5
Temp. (°C) 20±2 -25±3 20±2 85±2 20±2
As shown in the figure at right, fix the body of
the capacitor and apply a tensile weight
gradually to each lead wire in the radial
Pull
direction of the capacitor up to 10N (5N for
W
lead diameter 0.5mm), and keep it for 10±1
Lead wire should not be cut off. sec.
9 Strength of Lead
Capacitor should not be broken.
Each lead wire should be subjected to 5N (2.5N for lead
diameter 0.5mm) of weight and bent 90° at the point of egress,
Bending in one direction, then returned to its original position and bent
90° in the opposite direction at the rate of one bend in 2 to 3
sec.
Appearance No marked defect The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration Capacitance Within specified tolerance
10 total amplitude, with about a 1 minute rate of vibration change
Resistance
Char. B, E: 2.5% max. from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
D.F.
Char. F: 5.0% max. 2 hrs. each in 3 mutually perpendicular directions.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
Lead wire should be soldered with
sec. In both cases the depth of dipping is up to about 1.5 to
11 Solderability of Leads uniform coating on the axial direction
2mm from the root of lead wires.
over 3/4 of the circumferential direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Appearance No marked defect The lead wire should be immersed into the melted solder of
350±10°C (Body of ø5mm and under: 270±5°C) up to about 1.5
Char. B: Within ± 5%
Capacitance to 2mm from the main body for 3.5±0.5 sec.
Char. E: Within ± 15%
Change (Body of ø5mm and under: 5±0.5 sec.)
Soldering Effect Char. F: Within ± 20%
12 Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
(Non-Preheat)
then placed at *room condition for 24±2 hrs.
Dielectric Strength
before initial measurements.
(Between Lead
Wires)
Per item 4.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at 9
*room condition.
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

Continued on the following page.

47
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEB Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect First the capacitor should be

stored at 120+0/-5°C for Thermal , Capacitor
Char. B: Within ± 5% Screen, ,
Capacitance 60+0/-5 sec. ,
,,,,,,,,,, ,
Change
Char. E: Within ± 15%
Then, as in figure, the lead wires
,,,,,,
,,,,,,,,,,
, 1.5
,,,,
,
Char. F: Within ± 20% , to 2.0mm
should be immersed solder of ,
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm Solder
Soldering Effect
13 from the root of terminal for
(On-Preheat)
7.5+0/-1 sec.
Dielectric Strength
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
(Between Lead Per item 4.
then placed at *room condition for 24±2 hrs.
Wires)
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
*room condition.
Appearance No marked defect The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char. B: Within ±10%
Capacitance <Temperature cycle>
Char. E: Within ±20%
Change Step Temperature (°C) Time (min)
Char. F: Within ±30%
1 -25±3 30
Char. B, E: 4.0% max. 2 Room Temp. 3
D.F.
Char. F: 7.5% max. 3 85±3 30
4 Room Temp. 3
I.R. 2000MΩ min.
Temperature Cycle time: 5 cycle
14 and Immersion <Immersion cycle>
Cycle Step Temperature (°C) Time (min) Immersion water
1 65 +5/-0 15 Clean water
2 0 ±3 15 Salt water
Dielectric Strength
Cycle time : 2 cycle
(Between Lead Per item 4.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Wires)
then placed at *room condition for 24±2 hrs.
before initial measurements.
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
*room condition.
Appearance No marked defect
Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
Char. B: Within ±10% relative humidity.
Capacitance
Char. E: Within ±20% Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Humidity (Under Change
15 Char. F: Within ±30% then placed at *room condition for 24±2 hrs.
Steady State)
Char. B, E: 5.0% max. before initial measurements.
D.F. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
Char. F: 7.5% max.
*room condition.
I.R. 1000MΩ min.
Appearance No marked defect
Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to
Char. B: Within ±10% 95% relative humidity. (Charge/Discharge currentV50mA)
Capacitance
Char. E: Within ±20% Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Humidity Change
16 Char. F: Within ±30% then placed at *room condition for 24±2 hrs.
Loading
Char. B, E: 5.0% max. before initial measurements.
D.F. Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Char. F: 7.5% max.
then placed at *room condition for 24±2 hrs.
I.R. 500MΩ min.
Appearance No marked defect Apply a DC voltage of 150% of the rated voltage for
Char. B: Within ±10% 1000 +48/-0 hrs. at 85±2°C with a relative humidity of 50%
Capacitance max. (Charge/Discharge currentV50mA)
Char. E: Within ±20%
Change Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
17 Life Char. F: Within ±30%
then placed at *room condition for 24±2 hrs.
Char. B, E: 4.0% max. before initial measurements.
D.F.
Char. F: 7.5% max. Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
I.R. 2000MΩ min. then placed at *room condition for 24±2 hrs.

* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa

48
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized/High Voltage Ceramic Capacitors

DEC Series (Class 1, 2/DC6.3kV)

D max. T max.
■ Features
1. Coated with flame-retardant epoxy resin
(equivalent to UL94V-0 standard).
e
2. Available product for RoHS Restriction

25.0 min.
(EU Directive 2002/95/EC).
F±1.0
ød
■ Applications
(in mm)
1. Ideal for use as the ballast in back lighting
inverters for liquid crystal displays (SL Char.). [Bulk] Lead Code Coating Extension e ød
2. Ideal for use on high voltage circuits such as Straight Long (C4)
C4 3.0 max. 0.6±0.05

Cockcroft circuits (B Char.).

■ Marking
Temp. Char.
SL B E
Nominal Body Diameter

5D
ø7mm 6KV

47J 331K
ø8-9mm 6KV 6KV
66 66

151J B 222Z
6KV 102K 6KV
ø10-15mm 6KV
66 66
66

Temperature Characteristics Marked with code for char. B (omitted for nominal body diameter ø9mm and under)
Nominal Capacitance Under 100pF: Actual value, 100pF and over: Marked with 3 figures
Capacitance Tolerance Marked with code
Rated Voltage Marked with code (In case of DC6.3kV, marked with 6KV)
Manufacturer's Identification Marked with (omitted for nominal body diameter ø9mm and under)
Manufactured Date Code Abbreviation (omitted for nominal body diameter ø7mm)

SL Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T
Part Number Voltage
(Vdc) (pF) (mm) (mm) (mm)
DEC1X3J050DC4BMS1 6300 5 ±0.5pF 7 10.0 7.0
DEC1X3J100JC4BMS1 6300 10 ±5% 7 10.0 7.0
DEC1X3J120JC4B 6300 12 ±5% 8 10.0 7.0
DEC1X3J150JC4B 6300 15 ±5% 8 10.0 7.0
DEC1X3J180JC4B 6300 18 ±5% 9 10.0 7.0
DEC1X3J220JC4B 6300 22 ±5% 9 10.0 7.0
DEC1X3J270JC4B 6300 27 ±5% 9 10.0 7.0
DEC1X3J330JC4B 6300 33 ±5% 9 10.0 7.0
DEC1X3J390JC4B 6300 39 ±5% 9 10.0 7.0
DEC1X3J470JC4B 6300 47 ±5% 9 10.0 7.0
DEC1X3J560JC4B 6300 56 ±5% 10 10.0 7.0
DEC1X3J680JC4B 6300 68 ±5% 12 10.0 7.0
DEC1X3J820JC4B 6300 82 ±5% 12 10.0 7.0
DEC1X3J101JC4B 6300 100 ±5% 13 10.0 7.0
DEC1X3J121JC4B 6300 120 ±5% 14 10.0 7.0
DEC1X3J151JC4B 6300 150 ±5% 15 10.0 7.0
10

49
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

B Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T
Part Number Voltage
(Vdc) (pF) (mm) (mm) (mm)
DECB33J101KC4B 6300 100 ±10% 9 10.0 7.0
DECB33J151KC4B 6300 150 ±10% 9 10.0 7.0
DECB33J221KC4B 6300 220 ±10% 9 10.0 7.0
DECB33J331KC4B 6300 330 ±10% 9 10.0 7.0
DECB33J471KC4B 6300 470 ±10% 10 10.0 7.0
DECB33J681KC4B 6300 680 ±10% 11 10.0 7.0
DECB33J102KC4B 6300 1000 ±10% 13 10.0 7.0

E Characteristics
DC Rated Capacitance Body Dia. D Lead Spacing F Body Thickness T
Part Number Voltage
(Vdc) (pF) (mm) (mm) (mm)
DECE33J102ZC4B 6300 1000 +80/-20% 11 10.0 7.0
DECE33J222ZC4B 6300 2200 +80/-20% 15 10.0 7.0

10

50
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEC Series Specifications and Test Methods

No. Item Specifications Testing Method

1 Operating Temperature Range -25 to +85°C

No marked defect on appearance form
The capacitor should be visually inspected for evidence of
2 Appearance and Dimensions and dimensions are within specified
defect. Dimensions should be measured with slide calipers.
range.
3 Marking To be easily legible The capacitor should be visually inspected.
The capacitor should not be damaged when DC voltage of
Between Lead
No failure 200% of the rated voltage is applied between the lead wires for
Wires
1 to 5 sec. (Charge/Discharge currentV50mA)
The capacitor is placed in the container
Dielectric with metal balls of diameter 1mm so that
4 each lead wire, short circuited, is kept
Strength
about 2mm off the metal balls as shown in
Body Insulation No failure
the figure at right, and DC voltage of 1.3kV About 2mm

is applied for 1 to 5 sec. between capacitor Metal balls

lead wires and metal balls.
(Charge/Discharge currentV50mA)
Insulation Between Lead The insulation resistance should be measured with
5 10000MΩ min.
Resistance (I.R.) Wires DC500±50V within 60±5 sec. of charging.
The capacitance should be measured at 20°C with 1±0.2kHz
6 Capacitance Within specified tolerance
(Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
Char. SL: 400+20C*2min. (30pF under)
Q The dissipation factor and Q should be measured at 20°C with
7 1000 min. (30pF min.)
1±0.2kHz (Char. SL: 1±0.2MHz) and AC5V(r.m.s.) max.
Dissipation Factor (D.F.) Char. B, E: 2.5% max.
Char. SL: +350 to -1000ppm/°C The capacitance measurement should be made at each step
(Temp. range: +20 to +85°C) specified in Table.
Char. B: Within ±10%
Char. E: Within +20/-55%
8 Temperature Characteristics
Pre-treatment : Capacitor should be stored at 85±2°C for 1 hr., then placed at
*1room condition for 24±2 hrs. before measurements. (Char. B, E)
Step 1 2 3 4 5
Temp. (°C) 20±2 -25±3 20±2 85±2 20±2

As shown in the figure at right, fix the body of

the capacitor and apply a tensile weight
Pull gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep W
Lead wire should not be cut off. it for 10±1 sec.
9 Strength of Lead
Capacitor should not be broken.
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
Bending
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3 sec.
Appearance No marked defect
The capacitor should be firmly soldered to the supporting lead
Capacitance Within specified tolerance wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
Vibration
10 Char. SL: 400+20C*2min. (30pF under) total amplitude, with about a 1 minute rate of vibration change
Resistance Q
1000 min. (30pF min.) from 10Hz to 55Hz and back to 10Hz. Apply for a total of 6 hrs.,
2 hrs. each in 3 mutually perpendicular directions.
D.F. Char. B, E: 2.5% max.
The lead wire of a capacitor should be dipped into a ethanol
solution of 25wt% rosin and then into molten solder for 2±0.5
Lead wire should be soldered with
sec. In both cases the depth of dipping is up to about 1.5 to
11 Solderability of Leads uniform coating on the axial direction
2mm from the root of lead wires.
over 3/4 of the circumferential direction.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
Appearance No marked defect The lead wire should be immersed into the melted solder of
350±10°C up to about 1.5 to 2mm from the main body for
Char. SL: Within ±2.5%
Capacitance 3.5±0.5 sec.
Char. B: Within ±5%
Change Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Char. E: Within ±15%
Soldering Effect then placed at *1room condition for 24±2 hrs.
12
(Non-Preheat) before initial measurements. (Char. B, E)
Dielectric Strength Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
(Between Lead Per item 4. *1room condition. (Char. SL)
Wires) Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
*1room condition. (Char. B, E)
*1 "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF)

Continued on the following page.

10

51
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

DEC Series Specifications and Test Methods

Continued from the preceding page.

No. Item Specifications Testing Method

Appearance No marked defect First the capacitor should be

stored at 120+0/-5°C for Thermal , Capacitor
Char. SL: Within ±2.5% Screen, ,
Capacitance 60+0/-5 sec. ,
,,,,,,,,,, ,
Change
Char. B: Within ±5%
Then, as in figure, the lead wires
,,,,,,
,,,,,,,,,,
, 1.5
,,,,
,
Char. E: Within ±15% , to 2.0mm
should be immersed solder of ,
,,,Molten
260+0/-5°C up to 1.5 to 2.0mm Solder
from the root of terminal for
Soldering Effect
13 7.5+0/-1 sec.
(On-Preheat)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Dielectric Strength
then placed at *1room condition for 24±2 hrs.
(Between Lead Per item 4.
before initial measurements. (Char. B, E)
Wires)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
*1room condition. (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
*1room condition. (Char. B, E)
Appearance No marked defect The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Char. SL: Within ±3%
Capacitance
Char. B: Within ±10%
Change <Temperature cycle>
Char. E: Within ±20%
Step Temperature (°C) Time (min)
2
Char. SL: 275+5/2C* min. (30pF under) 1 -25±3 30
Q
350 min. (30pF min.) 2 Room Temp. 3
3 85±3 30
D.F. Char. B, E: 4.0% max.
4 Room Temp. 3
Temperature I.R. 2000MΩ min. Cycle time: 5 cycle
14 and Immersion <Immersion cycle>
Cycle Step Temperature (°C) Time (min) Immersion water
1 65 +5/-0 15 Clean water
2 0 ±3 15 Salt water
Dielectric Strength Cycle time: 2 cycle
(Between Lead Per item 4.
Wires) Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at *1room condition for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
*1room condition.
Appearance No marked defect
Char. SL: Within ±5% Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95%
Capacitance
Char. B: Within ±10% relative humidity.
Change
Char. E: Within ±20% Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Humidity (Under
15 then placed at *1room condition for 24±2 hrs.
Steady State) Char. SL: 275+5/2C*2min. (30pF under)
Q before initial measurements. (Char. B, E)
350 min. (30pF min.)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
D.F. Char. B, E: 5.0% max. *1room condition.
I.R. 1000MΩ min.
Appearance No marked defect
Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to
Char. SL: Within ±7.5% 95% relative humidity. (Charge/Discharge currentV50mA.)
Capacitance
Char. B: Within ±10% Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Change
Char. E: Within ±20% then placed at *1room condition for 24±2 hrs.
Humidity before initial measurements. (Char. B, E)
16 Char. SL:
Loading Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
Q 100+10/3C*2min. (30pF under)
*1room condition. (Char. SL)
200 min. (30pF min.)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
D.F. Char. B, E: 5.0% max. then placed at *1room condition for 24±2 hrs.
(Char. B, E)
I.R. 500MΩ min.
Appearance No marked defect Apply a DC voltage of 150% of the rated voltage for
1000 +48/-0 hrs. at 85±2°C with a relative humidity of 50%
Char. SL: Within ±3%
Capacitance max. (Charge/Discharge currentV50mA.)
Char. B: Within ±10%
Change Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
Char. E: Within ±20%
then placed at *1room condition for 24±2 hrs.
17 Life Char. SL: 275+5/2C*2min. (30pF under) before initial measurements. (Char. B, E)
Q
350 min. (30pF min.) Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
D.F. Char. B, E: 4.0% max. *1room condition. (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at *1room condition for 24±2 hrs.
I.R. 2000MΩ min.
(Char. B, E)
1
* "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF)

10

52
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors Characteristics Data (Typical Example)

■ Capacitance-Temperature Characteristics
B, E, F, SL char. C, D, R char.
60 20

40 D C
10

20 R
Cap. Change (%)

Cap. Change (%)

SL 0
0 B
B SL

-20
-10
E
-40
E -20 R
-60
C D
F
-80 F
-30
-40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 140
Temperature (°C) Temperature (°C)

■ Capacitance-DC Bias Characteristics

20
DESD33A471KA2B
DEA1X3D221JA2B
0
DEHR33D102KA3B

-20
Cap. Change (%)

-40

DEBB33D102KA2B
-60

DEBE33D222ZA2B
-80

-100
0 500 1000 1500 2000
DC Bias (V)

10

53
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors Packaging

Taping Specifications

15.0mm pitch / lead spacing 7.5mm taping 15.0mm pitch / lead spacing 7.5mm taping
Straight type Vertical crimp type
(Lead Code : P3) (Lead Code : N3)

P2 P D ∆S ∆S
P2 P D
e

e
ød
P1 W2

W2
F P1 ød
F
H
W1

H0
L

W1
L
W0

W0

W
øD0 øD0
P0 R
P0 R

30.0mm pitch / lead spacing 7.5mm taping 12.7mm pitch / lead spacing 5.0mm taping
Vertical crimp type Straight type
(Lead Code : N7) (Lead Code : P2)
P2 P ∆S ∆S
D P2 P D

e
e

P1 ød

W 0 W2
P1 F ød F
W0 W2

W1
H0

H
W1

L
L

W
W

øD0 øD0
P0 R P0 R

12.7mm pitch / lead spacing 5.0mm taping O

∆h1 ∆h2
Vertical crimp type T max.
(Lead Code : N2) Marked ∗ ∗
P2 D ∆S side
P
∗

3.0 max.
e

P1 ød
W0 W2

F
H0
W1
L

H0
W

Lead Code Lead Code P2, P3

N2, N3, N7

t2

t1
øD0
P0 R

Item Code P3 N3 N7 P2 N2
Pitch of component P 15.0 30.0 12.7
Pitch of sprocket hole P0 15.0±0.3 12.7±0.3
Lead spacing F 7.5±1.0 5.0+0.8
–0.2
Length from hole center to component center P2 7.5±1.5 6.35±1.3
Length from hole center to lead P1 3.75±1.0 3.85±0.7
Body diameter D See the individual product specifications
Deviation along tape, left or right ∆S 0±2.0 0±1.0
Carrier tape width W 18.0±0.5
Position of sprocket hole W1 9.0±0.5
Lead distance between reference H 20.0 +1.5
–1.0 — 20.0 +1.5
–1.0 —
and bottom planes H0 — 18.0 +2.0
–0 — 18.0 +2.0
–0
Protrusion length r +0.5 to -1.0
Diameter of sprocket hole φD0 4.0±0.1
Lead diameter φd 0.6±0.05
Total tape thickness t1 0.6±0.3
Total thickness, tape and lead wire t2 1.5 max.
Body thickness T See the individual product specifications
+0
Portion to cut in case of defect L 11.0 –1.0
Hold down tape width W0 11.5 min.
Hold down tape position W2 1.5±1.5
Coating extension on lead e 3.0 max. (Vertical crimp type : Up to the end of crimp)
Deviation across tape, front ∆h1
2.0 max. 1.0 max.
Deviation across tape, rear ∆h2
10 (in : mm)

Continued on the following page.

54
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors Packaging

Continued from the preceding page.

Packaging Styles
Bulk Taping
Polyethylene Bag Ammo Pack

Minimum Quantity (Order in Sets Only)

[Bulk] 1,000 pcs.
[Taping]
1,500 pcs. (Lead Code : P2, N2)
1,000 pcs. (Lead Code : P3, N3∗)
500 pcs. (Lead Code : N7)
∗ 900 pcs. for 2kV and 3.15kV

Minimum Order Quantity

[Bulk] 3,000 pcs.
[Taping]
3,000 pcs. (Lead Code : P2, N2)
3,000 pcs. (Lead Code : P3, N3∗)
2,000 pcs. (Lead Code : N7)
∗ 2,700 pcs. for 2kV and 3.15kV

“Minimum Quantity” means the numbers of units of each delivery or order. The
quantity should be an integral multiple of the “minimum quantity”. (Please note
that the actual delivery quantity in a package may change sometimes.)

10

55
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

■ !Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p which contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes these
irregular voltages.
When using the low-dissipation DEA (SL Char.) /DEC (SL
Char.) /DEH (C, R Char.) /DES (D Char.) series in a high-
frequency and high-voltage circuit, be sure to read the
instructions in item 4.

Voltage DC Voltage DC+AC Voltage AC Voltage Pulse Voltage (1) Pulse Voltage (2)

Positional
V0-p V0-p Vp-p Vp-p Vp-p
Measurement

2. Operating Temperature and Self-generated Heat

Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a high-
frequency current, pulse current or similar current, it may
self-generate heat due to dielectric loss. The frequency of
the applied sine wave voltage should be less than
300kHz. The applied voltage load (*) should be such that
the capacitor's self-generated heat is within 20°C at an
atmosphere temperature of 25°C. When measuring, use
a thermocouple of small thermal capacity-K of ø0.1mm in
conditions where the capacitor is not affected by radiant
heat from other components or surrounding ambient
fluctuations.
Excessive heat may lead to deterioration of the
capacitor's characteristics and reliability.
(Never attempt to perform measurement with the cooling
fan running. Otherwise, accurate measurement cannot
be ensured.)

*Before using the low-dissipation DEA/DEC (SL Char.)

/DEH/DES series, be sure to read the instructions in
item 4.

3. Fail-Safe
When capacitor is broken, failure may result in a short
circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure would follow
an electric shock, fire or fume.
Continued on the following page.

10

56
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

Continued from the preceding page.

4. Load Reduction and Self-generated Heat During

Application of High-frequency and High-voltage
Due to the low self-heating characteristics of low- We are offering free software the "capacitor selection
dissipation capacitors, the allowable electric power of tool: Murata Medium Voltage Capacitors Selection Tool
these capacitors is generally much higher than that of B by Voltage Form (*)" which will assist you in selecting a
characteristic capacitors. However, in case the self- suitable capacitor.
heating temperature is 20°C under a high-frequency The software can be downloaded from Murata's Internet
voltage whose peak-to-peak value equals the capacitor's Web site.
rated voltage, the capacitor's power consumption may (http://www.murata.com/designlib/mmcsv_e.html)
exceed it's allowable electric power. By inputting capacitance values and applied voltage
Therefore, when using the DEA/DEC (SL Char.) /DEH waveform of the specific capacitor series, this software
/DES series in a high-frequency and high-voltage circuit will calculate the capacitor's power consumption and list
with a frequency of 1kHz or higher, make sure that the suitable capacitors.
Vp-p values including the DC bias, do not exceed the When the result of this software is different from the
applied voltage value specified in Table 1. Also make measurement result of the self-heating temperature on
sure that the self-heating temperature (the difference your side, please contact our sales representatives or
between the capacitor's surface temperature and the product engineers.
capacitor's ambient temperature ) at an ambient
temperature of 25°C does not exceed the value specified * As of May. 2005, subject series are below.
in Table 1. · DEA/DEH/DES Series: Selection currently available.
As shown in Fig. 2, the self-heating temperature
depends on the ambient temperature. Therefore, if you Failure to follow the above cautions (items 1 to 4) may
are not able to set the ambient temperature to result, worst case, in a short circuit and cause fuming or
approximately 25°C, please contact our sales partial dispersion when the product is used.
representatives or product engineers.

<Table 1> Allowable Conditions at High-frequency <Fig. 1> Relationship Between Applied Voltage and
Allowable Conditions Self-heating Temperature (Allowable Self-heating
DC at High-frequency *3 Capacitor's Temp. at 25°C Ambient Temp.)
Temp.
Series Rated Ambient
Char. Applied Self-heating Temp.
Voltage Temp. *2 DEH Series R Char. (Rated Voltage: DC1kV to 3.15kV)
Voltage (Max.) (25°C Ambient Temp.) *1
25
Allowable Self-heating Temp. [°C]

R 250V 250Vp-p 10°C Max.

C 500V 500Vp-p 20°C Max. 20
800Vp-p 20°C Max.
1kV 15
1000Vp-p 5°C Max.
DEH
1400Vp-p 20°C Max. 10
R 2kV
2000Vp-p 5°C Max.
5
1600Vp-p 20°C Max. Rated Voltage: 1kV 2kV 3.15kV
3.15kV
3150Vp-p 5°C Max. -25 to +85°C
0
100 1000 10000
1kV 1000Vp-p
Applied Voltage [Vp-p]
DEA SL 2kV 2000Vp-p 5°C Max.
3.15kV 3150Vp-p
DEC SL 6.3kV 6300Vp-p 5°C Max.
DES Series D Char. (Rated Voltage: DC1kV)
500V 500Vp-p
15°C Max. 25
Allowable Self-heating Temp. [°C]

DES D 800Vp-p
1kV
1000Vp-p 5°C Max. 20

*1 Fig. 1 shows the relationship between the applied voltage and the allowable self-
15
heating temperature regarding 1 to 3.15kV rated voltage of the DEH series R
characteristic and 1kV rated voltage of the DES series D characteristic.
10
*2 When the ambient temperature is 85 to 125°C, the applied voltage needs to be
further reduced. If the DEA/DEH/DES series needs to be used at an ambient
5
temperature of 85 to 125°C, please contact our sales representatives or product Rated Voltage: DC1kV
engineers.
0
*3 Fig. 3 shows reference data on the allowable voltage-frequency characteristic for 100 1000 10000
a sine wave voltage. Applied Voltage [Vp-p]

Continued on the following page.

10

57
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

Continued from the preceding page.

<Fig. 2> Dependence of Self-heating Temperature on

Ambient Temperature

DEH Series C Char. and R Char. (Rated Voltage: DC1kV to 3.15kV) DEH Series R Char. (Rated Voltage: DC250V) and
DEA/DEC Series SL Char. (Rated Voltage: DC1kV to 6.3kV)
25 20
Self-heating Temperature [°C]

Self-heating Temperature [°C]

20
15

15
C Char. (500V) 10
R Char. (1 to 3.15kV) R Char. (250V)
10

5
5
SL Char. (1 to 6.3kV)
0 0
0 20 (25) 40 60 80 100 0 20 (25) 40 60 80 100
Ambient Temperature [°C] Ambient Temperature [°C]

DES Series D Char.

(Rated Voltage: DC500V to 1kV)
25
Self-heating Temperature [°C]

20

15
D Char. (500V to 1kV)
10

0
0 20 (25) 40 60 80 100
Ambient Temperature [°C]

Continued on the following page.

10

58
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

Continued from the preceding page.

<Fig. 3> Allowable Voltage (Sine Wave Voltage) - Frequency Characteristics (At Ambient Temperature of 85°C or less)
Because of the influence of harmonics, when the applied to the allowable voltage for a sine wave whose fundamental
voltage is a rectangular wave or pulse wave voltage (instead frequency is twice as large as that of the rectangular wave or
of a sine wave voltage), the heat generated by the capacitor pulse wave. This allowable voltage, however, varies
is higher than the value obtained by application of the sine depending on the voltage and current waveforms.
wave with the same fundamental frequency. Therefore, you are requested to make sure that the self-
Roughly calculated for reference, the allowable voltage for a heating temperature is not higher than the value specified in
rectangular wave or pulse wave corresponds approximately Table 1.

DEH Series R Char. (Rated Voltage: DC250V) DEH Series C Char. (Rated Voltage: DC500V)
10000 10000
Allowable Voltage [Vp-p]

Allowable Voltage [Vp-p]

1000 1000

(500) to 470pF
1000pF
(250) to 2200pF 2200pF
4700pF
4700pF
10000pF
100 100
1 10 100 1000 1 10 100 1000
Frequency [kHz] Frequency [kHz]

DEH Series R Char. (Rated Voltage: DC1kV) DEH Series R Char. (Rated Voltage: DC2kV)
10000 10000
Allowable Voltage [Vp-p]

Allowable Voltage [Vp-p]

1000 1000
220pF 220pF
470pF 470pF
1000pF 1000pF
2200pF 2200pF
4700pF
4700pF

100 100
1 10 100 1000 1 10 100 1000
Frequency [kHz] Frequency [kHz]

DEH Series R Char. (Rated Voltage: DC3.15kV)

10000

(3150)
Allowable Voltage [Vp-p]

1000 220pF
470pF
1000pF
2200pF

100
1 10 100 1000
Frequency [kHz] 10
Continued on the following page.

59
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

Continued from the preceding page.

<Fig. 3 (continue)> Allowable Voltage (Sine Wave Voltage) -

Frequency Characteristics
(At Ambient Temperature of 85°C or less)

Because of the influence of harmonics, when the applied approximately to the allowable voltage for a sine wave
voltage is a rectangular wave or pulse wave voltage whose fundamental frequency is twice as large as that of
(instead of a sine wave voltage), the heat generated by the rectangular wave or pulse wave.
the capacitor is higher than the value obtained by This allowable voltage, however, varies depending on the
application of the sine wave with the same fundamental voltage and current waveforms.
frequency. Therefore, you are requested to make sure that the self-
Roughly calculated for reference, the allowable voltage heating temperature is not higher than the value specified
for a rectangular wave or pulse wave corresponds in Table 1.

DEA Series SL Char. (Rated Voltage: DC1kV) DEA Series SL Char. (Rated Voltage: DC2kV)
10000 10000
Allowable Voltage [Vp-p]

Allowable Voltage [Vp-p] 10pF

100pF
1000 to 100pF 1000 220pF
220pF 470pF
470pF

100 100
1 10 100 1000 1 10 100 1000
Frequency [kHz] Frequency [kHz]

DEA Series SL Char. (Rated Voltage: DC3.15kV) DEC Series SL Char. (Rated Voltage: DC6.3kV)
10000 10000

(6300)
to 22pF
47pF
(3150) 100pF
Allowable Voltage [Vp-p]

Allowable Voltage [Vp-p]

10pF
100pF
220pF
1000 1000

100 100
1 10 100 1000 1 10 100 1000
Frequency [kHz] Frequency [kHz]

Continued on the following page.

10

60
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

Continued from the preceding page.

<Fig. 3 (continue)> Allowable Voltage (Sine Wave Voltage) -

Frequency Characteristics
(At Ambient Temperature of 85°C or less)

Because of the influence of harmonics, when the applied approximately to the allowable voltage for a sine wave
voltage is a rectangular wave or pulse wave voltage whose fundamental frequency is twice as large as that of
(instead of a sine wave voltage), the heat generated by the rectangular wave or pulse wave.
the capacitor is higher than the value obtained by This allowable voltage, however, varies depending on the
application of the sine wave with the same fundamental voltage and current waveforms.
frequency. Therefore, you are requested to make sure that the self-
Roughly calculated for reference, the allowable voltage heating temperature is not higher than the value specified
for a rectangular wave or pulse wave corresponds in Table 1.

DES Series D Char. (Rated Voltage: DC500V) DES Series D Char. (Rated Voltage: DC1kV)
10000 10000
Allowable Voltage [Vp-p]

Allowable Voltage [Vp-p]

100pF
1000 1000 220pF
470pF
1000pF
(500) to 1000pF 2200pF
2200pF 4700pF
4700pF

100 100
1 10 100 1000 1 10 100 1000
Frequency [kHz] Frequency [kHz]

10

61
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors !Caution

■ !Caution (Storage and Operating Condition)

Operating and storage environment equipment. Store the capacitors where the
The insulating coating of capacitors does not form a temperature and relative humidity do not exceed -10
perfect seal; therefore, do not use or store to 40 degrees centigrade and 15 to 85 %.
capacitors in a corrosive atmosphere, especially Use capacitors within 6 months after delivered.
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. And avoid exposure to FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
moisture. Before cleaning, bonding or molding this RESULT, WORST CASE, IN A SHORT CIRCUIT
product, verify that these processes do not affect AND CAUSE FUMING OR PARTIAL DISPERSION
product quality by testing the performance of a WHEN THE PRODUCT IS USED.
cleaned, bonded or molded product in the intended

■ !Caution (Soldering and Mounting)

1. Vibration and impact the bonded, molded or coated product in the intended
Do not expose a capacitor or its leads to equipment.
excessive shock or vibration during use. In case of the amount of applications, dryness/
2. Soldering hardening conditions of adhesives and molding resins
When soldering this product to a PCB/PWB, do not containing organic solvents (ethyl acetate, methyl
exceed the solder heat resistance specification of ethyl ketone, toluene, etc.) are unsuitable, the
the capacitor. Subjecting this product to excessive outer coating resin of a capacitor is damaged by the
heating could melt the internal junction solder and organic solvents and it may result, worst case, in a
may result in thermal shocks that can crack the short circuit.
ceramic element. The variation in thickness of adhesive, molding
When soldering capacitor with a soldering iron, it resin or coating may cause a outer coating resin
should be performed in following conditions. cracking and/or ceramic element cracking of a
Temperature of iron-tip: 400 degrees C. max. capacitor in a temperature cycling.
Soldering iron wattage : 50W max.
Soldering time : 3.5 sec. max. FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
3. Bonding, resin molding and coating RESULT, WORST CASE, IN A SHORT CIRCUIT
Before bonding, molding or coating this product, AND CAUSE FUMING OR PARTIAL DISPERSION
verify that these processes do not affect the WHEN THE PRODUCT IS USED.
quality of capacitor by testing the performance of

■ !Caution (Handling)
Vibration and impact
Do not expose a capacitor or its leads to excessive
shock or vibration during use.

FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY

RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.

10

62
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

High Voltage Ceramic Capacitors Notice

■ Notice (Soldering and Mounting)

Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity : Output of 20 watts per liter or
less.
Rinsing time : 5 min. maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.

■ Notice (Rating)
Capacitance change of capacitor greatly depending on the surrounding temperature
1. DEA/DEC series (Temp. Char. SL) or an applied voltage. So, it is not likely to be
Capacitance might change a little depending on suitable for use in a time constant circuit.
the surrounding temperature or an applied voltage. Please contact us if you need detailed information.
Please contact us if you intend to use this 3. DEH/DES series
product in a strict time constant circuit. Capacitance might change greatly depending on the
2. DEB/DEC series (Temp. Char. B, E, F) surrounding temperature or an applied voltage.
Capacitors have an aging characteristic, whereby So, it is not likely to be suitable for use in a
the capacitor continually decreases its time constant circuit. Please contact us if you
capacitance slightly if the capacitor is left on need detailed information.
for a long time. Moreover, capacitance might change

10

63
!Note • This PDF catalog
!Note is downloaded
• Please from!CAUTION
read rating and the website (for
of Murata Manufacturing
storage, co., ltd.
operating, rating, Therefore,
soldering, it’s specifications
mounting and handling)areinsubject to change
this catalog or oursmoking
to prevent productsand/or
in it may be discontinued
burning, etc. without advance notice. Please check with our
C85E.pdf
sales representatives or product
• This catalog engineers
has only before ordering.
typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Safety Recognized Ceramic Capacitors/High Voltage Ceramic Capacitors ISO9000 Certifications

Manufacturing plants which produce the products in this

catalog have obtained the ISO9000 quality system certificate.

Plant Applied Standard

Izumo Murata Manufacturing Co., Ltd. ISO9001

Murata Electronics (Thailand), Ltd. ISO9001
Taiwan Murata Electronics Co., Ltd. ISO9001

10

64
!Note • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our C85E.pdf
sales representatives or product engineers before ordering.
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 06.6.1

Note:
1. Export Control
<
For customers outside Japan >
No muRata products should be used or sold, through any channels, for use in the design, development, production, utilization, maintenance or operation of, or
otherwise contribution to (1) any weapons (Weapons of Mass Destruction (nuclear, chemical or biological weapons or missiles) or conventional weapons) or (2)
goods or systems specially designed or intended for military end-use or utilization by military end-users.
<
For customers in Japan >
For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required
for export.
2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially
high reliability for the prevention of defects which might directly damage a third party's life, body or property, or when one of our products is intended for use in
applications other than those specified in this catalog.
q Aircraft equipment w Aerospace equipment
e Undersea equipment r Power plant equipment
t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.)
u Traffic signal equipment i Disaster prevention / crime prevention equipment
o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed above
3. Product specifications in this catalog are as of March 2006. They are subject to change or our products in it may be discontinued without advance notice. Please
check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product
engineers.
4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or
transact the approval sheet for product specifications before ordering.
6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect
of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or
contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned
above under licenses without our consent.
7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

http://www.murata.com/
Head Office International Division
1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan
Phone: 81-75-951-9111 Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: [email protected]
 EN - For pricing and availability in your local country please visit one of the below links:

DE - Informationen zu Preisen und Verfügbarkeit in Ihrem Land erhalten Sie über die unten aufgeführten Links:

FR - Pour connaître les tarifs et la disponibilité dans votre pays, cliquez sur l'un des liens suivants:

DEBE33D103ZA3B DEA1X3D220JC1B DEA1X3D331JA3B DEA1X3F100JCDB DEA1X3F120JCDB

DEA1X3F470JC3B DEA1X3F470JD3B DEBB33F332KA3B DEBF33D222ZB2B DEC1X3J101JC4B

DEC1X3J680JC4B DECB33J151KC4B DEHR33D122KA3B DEA1X3D470JA2B. DE21XKY680JA2BM0

1

EN DE FR
This Datasheet is presented by Dieses Datenblatt wird vom Cette fiche technique est
the manufacturer Hersteller bereitgestellt présentée par le fabricant

Powered by TCPDF (www.tcpdf.org)