Scribd
Upload
205 views1 page

Chemical Test of Water Discipline: Chemical Group: Water (Construction Purpose)

The chemical test of water showed that it met the requirements for construction purposes. The acidity was within the acceptable limit of 100 ml. The alkalinity and pH also met the standards. The levels of organic content, inorganic content, sulphates, chlorides, and suspended matter were all under the maximum thresholds specified in the relevant standards. Therefore, the water was found to be suitable for construction based on the chemical analysis.

Uploaded by

Sudhir Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
205 views1 page

Chemical Test of Water Discipline: Chemical Group: Water (Construction Purpose)

The chemical test of water showed that it met the requirements for construction purposes. The acidity was within the acceptable limit of 100 ml. The alkalinity and pH also met the standards. The levels of organic content, inorganic content, sulphates, chlorides, and suspended matter were all under the maximum thresholds specified in the relevant standards. Therefore, the water was found to be suitable for construction based on the chemical analysis.

Uploaded by

Sudhir Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

CHEMICAL TEST OF WATER

Discipline : Chemical Group: Water (Construction Purpose)

Sl. Requirement As Per


Test Parameter Unit Result Conformity Method of Test
No. IS 456:2000, RA-2016

Acidity
(Volume of 0.02N NaOH
IS 3025
Required to neutralize
1 ml (Pt-22)-1986
100 ml sample using
RA-2019
Phenolphthalein
indicator)

Alaklinity
(Volume of 0.02N H₂SO₄ IS 3025
2 required to neutralize 100 ml (Pt-23)-1986
ml sample using mixed RA-2019
indicator)

3 Organic Content mg/litre 200 (Max) IS 3025 (Pt-18)-


1984
4 Inorganic Content mg/litre 3000 (Max) RA-2017

Sulphates (as SO3) IS 3025 (Pt-24)-


5 mg/litre 400 (Max)
1986, RA-2019
2000 (Max) for plain
IS 3025 (Pt-24)-
6 Chloride (as Cl) mg/litre concrte,
1986,RA-2019
500 (Max) for RCC
IS 3025 (Pt-17)-
7 Suspended Matter mg/litre 200 (Max)
1984, RA-2017
IS 3025 (Pt-11)-
8 pH - 6 (Min.)
1983, RA-2017

You might also like