G.

T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

HH. Sales No. Mum. 01/14-15/03 Dated: - 03/01/2015

M/s EMS Technologies pvt ltd

S.No.43/3,new gut no.322,
plot no.1,Vishwachhaya
Ind.Estate,Pirangut,
Tal-Mulshi
Pune 411042
Ph.020-32305832
E mail: [email protected]

Kind Attn:- Mr. L.Sampath

Dear Sir,

Subject: Offer for Press Brake Model EHPe 80.25/20

Reference: Your discussion with Mr.Gaikwad requirement of Press Brake.

We thank you for your enquiry for the CNC Press Brake. Based on the details sent to us, we
are pleased to offer for our CNC Hydraulic Press Brake model EHPe 80.25/20

CNC Hydraulic Press Brake model EHPe 80 X 2500 mm

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 1 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD
SCOPE & DETAILS

CONTROLLER
 CNC controller Model S 530 – ESA, Italy make as per following
details:-
o Graphic “7” LCD TFT display (800 x 480 pixels resolution)
o 32 kb of FRAM (no battery back required)
o 1 serial port RS232
o 2D graphical editing for punches and dies
o 2 D graphical preview for part piece (if graphically edited)
o USB memory stick available on all product range
CNC BACKGUAGE
 CNC X axis Backguage
 AC servo driven
 Range 0 – 550 mm
 R & Z axis manual adjustment
 Total 2 nos backguage pedestals
 Backguage accuracy - ±0.1 mm
 Backguage repeatability - ±0.1 mm
STANDARD ACCESSORIES
 Foot control pedal with emergency switch
 Side guard
 Rear guard
 Set of operational manual

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 2 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

TECHNICAL SPECIFICATIONS
CNC HYADRAULICS PRESS BRAKE
MODEL EHPe 80 X 2500mm

EHPe-80.25/20

1 PRESSING FORCE 80 Ton

2 BENDING LENGTH 2500 mm
3 DISTANCE BETWEEN UPRIGHTS 2050 mm
4 STROKE OF RAM 150 mm
DISTANCE BETWEEN TABLE &
375 mm
5 RAM
6 DEPTH OF THROAT 250 mm
7 TABLE WIDTH 60 mm
8 LOWERING SPEED 100 mm/s
9 PRESS SPEED 10 mm/s
10 RETURN SPEED 62 mm/s
11 MOTOR POWER 7.5 KW
12 OIL TANK 130 Ltr
13 LENGTH 2670 mm
14 WIDTH 1270 mm
15 HEIGHT 2440 mm
16 TOOLS EURO STAMP ITALY MAKE
17 CONTROLLER ESA ITALIAN
18 PUNCH FRONT SIDE MOUNTING
19 BACK GAUGE FINGER 2 No.
20 CNC CONTROLS Y1, Y2, X axis
21 Y1 Y2 axis Depth setting accuracy ± 0.01 mm
22 Y1 Y2 axis Programming accuracy ± 0.01 mm
23 Y1 Y2 axis repetition accuracy ± 0.01 mm
24 Backguage control CNC X axis, R&Z manual
25 X axis positioning accuracy ± 0.1 mm
26 X axis repetition accuracy ± 0.1 mm
27 X axis displacement speed 180 mm/s

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 3 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD
LIST OF IMPORTED PARTS USED IN CNC HYDRAULIC PRESS BRAKE EHPe

SL.NO. COMPONENT MAK PLACE

HYDRAULICS

1. PR.CONTROL VALVES HOERBIGER GERMANY

2. SERVO VALVES HOERBIGER GERMANY

3. SOL.VALVES ATOS ITALY

4. HYDRAULIC FILTER EPE / HYTOS INDIA

5. PACKINGS SIMRIT / BHUSHAK GERMANY

SHAMBAN/ NOVALITY INDIA

6. PUMP VELJAN INDIA

CONTROLLERS

7. CNC UNIT ESA HOLLAND

8. LINEAR SCALE HEIDENHEIN / GIVI HOLLAND/ITALY

BACKGAUGE

9. AC SERVO MOTOR SCHINIDER / YASKAWA JAPAN / FRANCE

10. SERVO AMPLIFIER SCHINIDER / YASKAWA JAPAN / FRANCE

11 TIMING BELTS BRECO FLEX/MULLER GERMANY

12. BALL SCREWS HIWIN JAPAN

13. GUIDE SHAFTS / L M GUIDE HIWIN JAPAN

ELECTRICALS

14. TIMER CONTACTOR TELEMECHNIQUE FRANCE

15. SCREW LESS TERMINAL WAGO GERMANY

NB: THE ABOVE MAKES ARE SUBJECT TO AVAILABILITY & CHANGE WITHOUT NOTICE

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 4 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

FEATURES OF CNC HYDRAULIC PRESS BRAKE – EHPe SERIES

 EHPe series of CNC Press Brake has a solid and rigid frame designed ensuring minimum deflection
even during full load operation.

 Design is based on Synchronized bed reference principle (SBR) with Y1-Y2 beam control.

 The position of the press beam is continuously monitored by measuring system.

 The measuring system consists of linear glass scales mounted on separate sub “C” frame fixed on
the lower machine beam.

 The electronic scales are fixed on either side of the press beam, providing a continuous feedback to
the CNC unit regarding actual position of the press beam, with respect to the table.

 Machine offers press beam depth accuracy of ±0.01 mm with high repeatability.

 The parallelism between press beam and table is maintained with electronic measuring system Y1-
Y2.

 Machine is with direct-angle programming feature. Also is ideal for multiple – angle bending in a
particular profile.

 With Y1-Y2 control the press beam can be used with eccentric load, while bending short length jobs
off center of the machine. This is without affecting quality or accuracy of machine

 Due to use of proportional Hydraulics, the exact force required for the job is calculated by the
controller is exerted thereby resulting in the power saving

 Press beam tilting is available upto ±10 mm for the machine tonnage upto 110 ton and above 150
ton will be with ±2mm as standard features.

 Machine structure parts are machined in single set up ensuring very high accuracy on parallelism
between top beam & lower table over the entire bed length and high perpendicularity accuracy over
the entire stroke length on upper beam movement with respect to the table length.

 Machine is designed & manufactured to ensure very precise backguage setting through out the
length across the backguage beam.

 Machine offers vibration force movement throughout the stroke length, even at extended dwell time
and increased / reduced speeds.

 Machine can be adapted to different type of tool design i.e. European design, low cost Japanese
design modifix design.

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 5 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

ADDITIONAL ACCESSORIES & TOOLING

Sr. No. Item

1 Tooling adaptors

 Punch adaptor with quick clamping & wedge adjustment

 2 V die adaptor
2 Tooling

 Semi gooseneck punch code 1011 – 835 mm x 1 pc , 805 mm segmented—

1 pc

 2 V DIE , 8 & 12x88deg ,code 2041--835 mm x3 nos

 2 V DIE , 16 &25 x86 deg ,code 2014--835 mm x3 nos

Material of tooling – 42CrM04 / C50

Make - Eurostamp, Italy

TOTAL FINAL PRICE

CNC Hydraulic Press Brake EHPe 80.25/20 ₹ 14,50,000/-

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 6 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

GENERAL TERMS & CONDITIONS (COMMON FOR ALL MACHINES)

1. THE FOLLOWING WILL BE TO CUSTOMER ACCOUNT: -

 Civil Foundation of machines as per our drawing
 Un loading and shipment to the work site of the machine
 Individual earthing and power cabling form the nearest connection points
 Servo voltage stabilizer of reputed make as per specifications given by us.
 First fill of hydraulic oil and lubricants as per the details provided by us along with the
order confirmation
 All the labour for the work during the assemble of the machine at site
 All the skilled & unskilled labour at your work site for machine start up & trials

2. ALL THE QUOTED PRICES ARE EX - WORKS JALANDHAR. (Punjab)

3. FREIGHT & INSURANCE

Freight & insurance charges will be extra to your account

4. TAXES & DUTIES

All Government taxes & levies will be extra as applicable as per Govt. Regulations, currently:-
Central Excise Duty @12% , CESS @2% BED, additional CESS @1% BED
Central Sales Tax @2% against form “C” will be as applicable. The form “C” to be provided
before dispatch of the machine. In case you will not issue the form “C” before despatch then we
will charge @6% amount of the invoice value as per rules and regulations.
VAT @12.5%where ever applicable in place of CST.

5. DELIVERY PERIOD

The delivery period for the above said machines will be 6 weeks
(The delivery period will be start from the date of realization of cheque to our account along
with technically and commercially clear purchase order

6. PAYMENT TERMS
Advance:- 30% of basic value along with technically & commercially clear order.
Balance:- Balance payment along with full taxes and duties after pre dispatch inspection
against proforma invoice, before despatch of the machine against demand draft or electronic
transfer payment. If the payment is by cheque then the despatch will be made after realization
of cheque. Please note our bank details as under:-

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 7 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

PUNJAB NATIONAL BANK

OLD RAILWAY ROAD, JALANDHAR CITY
ACCOUNT NO. - 3 5 1 3 0 0 8 7 0 0 0 0 0 3 1 9
RTGS NUMBER: - P U N B 0 3 5 1 3 0 0

7. INSTALLATION &TRAINING CHARGES

As a special case above said prices are included the installation and training charges

8. COMMISSIOING CHARGES
The commissioning charges included in price

9. PACKING CHARGES
Included in Price

10. STORAGE CHARGES

We shall charge a storage charges of @1% per week, one week after the complete machine is
offered for inspection , in case of the delay in the inspection of the machine and also in case
there is delay of more than one week in the release of the payment from the date of the
clearance of the pre dispatch inspection .

11. WARRANTY

The warranty period of the machines will be 12 months from the date of commissioning or 18
months from the date of dispatch which ever is earlier.
Note: - The bending tools & shearing blades will not be scope of the warranty of machine.

12. MATERIAL FOR THE TRAILS

In case other than agreed by us during the order finalization, any material required for any
specific trials shall be arranged by the customer in advance at our works.

13. OPERATION & SERVICE MAINTENANCE MANUAL

We shall supply you the one set of operational manual along with the machine with all the
details even like spares parts required / trouble shooting etc.

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 8 / 9
 G.T ROAD SURANUSSI
JALANDHAR, PUNJAB
(INDIA) PIN -1440 027
TEL 91-181-2670054 /55/56
FAX: 91–181–2670053/ 269
Email: - [email protected]
HINDUSTAN HYDRAULICS PVT LTD

14. ORDER CANCELLATION

There will not be any provision to cancel the order, under any circumstances once confirmed
after one week. In any event advance shall be forfeited; we shall be legally liable to recover all
the investments made on your behalf on the machine order with interest.

15. VALIDITY

The above offer is valid for 2 Months from the date of offer.

We are sure the above is in line with your requirement and look forward to receive your
valuedPurchase Order at the earliest. Please feel free to contact us for any further
information/clarifications.

We are attaching the Product Catalogues for your kind perusal.

Thanking You
For Hindustan Hydraulics Pvt Ltd
Raj Kumar Pichika
Vice President – Business Development
Mobile :08691021506
Email: [email protected]
[email protected]

Mumbai Office : D – 152, Amargyan Industrial Estate, Opp S.T.Workshop, Khopat, Thane (W) – 400 601 Tel: 022-25478821 /25478817
Mobile 9819714323 Email: [email protected], [email protected]
Bengaluru Office : No 10, Trust Complex, 2 nd Floor, DVG Road, Basavanagudi, Bengaluru – 560 004 Tel: 080 - 26604241 Page: 9 / 9