Scribd
Upload
209 views4 pages

Schneider Electric Altivar Process ATV9xx DTM Library V2.3.2

This document provides release notes for version 2.3.2 of the Altivar Process ATV9xx DTM Library software component. Key features of the new version include support for functional safety in direct safety logic mode with additional tabs, support for new firmware versions, and bug fixes. System requirements and compatibility information are also included.

Uploaded by

shura_7538645
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
209 views4 pages

Schneider Electric Altivar Process ATV9xx DTM Library V2.3.2

This document provides release notes for version 2.3.2 of the Altivar Process ATV9xx DTM Library software component. Key features of the new version include support for functional safety in direct safety logic mode with additional tabs, support for new firmware versions, and bug fixes. System requirements and compatibility information are also included.

Uploaded by

shura_7538645
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Schneider Electric Altivar Process ATV9xx DTM Library V2.3.

2
- Release Notes -
This document contains important information about the Altivar Process ATV9xx DTM Library software
component and Release Content.

1. Package Content

Software Component Name Version

Altivar Process ATV9xx DTM Library V2.3.2


Altivar Process ATV9xx V2.3.2.0

2. Features

2.0 What's New in V2.3.2

>> Support for Functional Safety in Direct Safety Logic Mode with additional tabs in the DTM : Safety Display and
Safety Conf

>> Support for Safety related ATV9xx firmware version V2.1IE80_B06 and Safety module firmware version
A05IE10_B14

>> Bug Fixes

2.1 What's New in V2.3.0

> Support for APM 400V References

> Support for ATV9xx firmware version V2.3IE20_B04

> Bug Fixes

2.2 What's New in V2.2.1

> Support for New FW V2.2IE_B03

> Support for FW compatibility

> Multi Configuration/ Multi Motor support

> Bug Fixes

2.3 What's New in V2.1.3


> Fix for FMK Version incompatibility
> Bug Fixes

2.4 What's New in V2.1.2

> Support for ATV9xx firmware version V2.1IE17_B11

> CR Fixes

3. System Requirement

3.1 Supported operating systems

This software can be installed on the following operating systems:

> Microsoft Windows 7 32/64-bit .

> Microsoft Windows 8.1 32/64-bit .


> Microsoft Windows 10.0 32/64-bit .

3.2 Minimum PC Requirements

Equipment Minimum

Processor Pentium 4 / Core 2 Duo, 2 GHz


RAM 2 GB
Free Hard Disk Space 1 GB of free disk space Must be available
Display Resolution: 1024 x 768 pixels with 32 bit colors DPI: 96

3.3 Recommended PC Requirements

Equipment Recommended

Processor Intel(R) Core(TM) i3


RAM 4 GB
Free Hard Disk Space 2 GB
Display Resolution: 1024 x 768 pixels with 32 bit colours DPI: 96

4. IMPORTANT NOTICE

> Before you install Altivar Process ATV9xx DTM Library:

1. Check if Altivar Process ATV6xx DTM Library V1.1.24 is installed in your PC.

2. If it is installed, upgrade it to the latest available Altivar Process ATV6xx DTM Library version.

5. Some restrictions which we are working on


> DTM is not in synchronized state after doing factory reset, a "Refresh" or "Load from Device" is requested.

> Sometimes parameter values cannot be edited in parameter grid inside parameter list tab .Use F2 key to edit
parameter values.

> Only English is available in the first version of this software.

> Local Stop Message will not be displayed,if Local Stop button is pressed momentarily or quickly.The button has to be
pressed firmly for 4-5 Sec.

> Visibility or disabling of a parameter depending on other parameter(s) are not managed at the moment in the
parameter grid.

> We observed that for some drive references, the CLI (Current Limitation) parameter does not reset after a factory
setting.

> Software does not respond after you try to select all parameters in the parameter tab using Ctrl + A.

> Import of configuration stored in the Keypad HMI from SoMove homepage is not yet available.

> MultiMotor switching sketchview is not yet available.

> Modify Topology does not update parameter value ranges (min & max) of NPR,NCR and UNS for some references.

6. Container Supported
> SoMove V2.7.6

> Control Expert V14.0

> M&M FDT Container V02_04_03_00

> ESME V1.1

> SoMachine V4.3

7. Altivar Process DTM in Unity


7.1 Versions Provided & Compatibility

Ac vity Version

Altivar Process 9xx DTM V2.3.2.0


V1.1IE01B10
V1.2IE02B20
V1.2IE03B02
V1.3IE04B04
V1.4IE07B05
V1.6IE09B08
Altivar Process 9xx Firmware V1.7IE12B05
V1.8IE14_B07
V1.9IE15_B07
V2.1IE17_B11
V2.1IE80_B06
V2.2IE19_B03
V2.3IE20_B04
Safety Module A05IE10_B14
ControlExpert ControlExpert V14.0
EcoStruxure Control Expert PSx DTM Library V3.12.20
M580 CPU RUN boot V2.80
M580 BME CPU V2.80

7.1 Featurs

> Additional tabs in the DTM : Safety Conf and Safety Display for supporting the Functional Safety.

7.2 Known issues or Observations:


> Pencil Icon (data set changed) that enables the Apply button appears when there is preset conf settings
configuration is exported and imported back

> Sometimes while performing load from device, resetting, open of .sft file, Safety Message pop up appears when
SC08 is set to Level / Auto without entering the SC08 control

> Labels that are too long are cropped in the Safety Display tab

> Sometimes bad display of DTM inside Unity container when clicking the splitter bar.

> Connection loss is happening for the first time after device recovery with 600V & 690V references.

> Under service tab voltage ranges are not dependant on firmware selection.

> Scope parameters are not selected in the parameter selection dialog when loaded from a saved configuration.

8. Altivar Process DTM in ESME

8.1 Versions Provided & Compatibility

Ac vity Version

Altivar Process 9xx DTM V2.3.2.0


V1.1IE01B10
V1.2IE02B20
V1.2IE03B02
V1.3IE04B04
V1.4IE07B05
V1.6IE09B08
Altivar Process 9xx Firmware V1.7IE12B05
V1.8IE14_B07
V1.9IE15_B07
V2.1IE17_B11
V2.1IE80_B06
V2.2IE19_B03
V2.3IE20_B04
Safety Module A05IE10_B14
ESME ESME V1.1

You might also like