Scribd
Upload
100 views

Assignment 3 PDF

This document contains 6 questions related to designing digital filters using bilinear transformation and impulse invariance methods. The questions ask the student to: 1) Design a single pole low-pass filter with a 3dB bandwidth of 0.2π using bilinear transformation. 2) Obtain the system function of a digital filter from a given analog filter function using bilinear transformation where the digital filter is resonant at ωr = π/2. 3) Design a second order Butterworth bandpass filter between 300Hz to 500Hz using bilinear transformation.

Uploaded by

Bhavey Malhotra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
100 views

Assignment 3 PDF

This document contains 6 questions related to designing digital filters using bilinear transformation and impulse invariance methods. The questions ask the student to: 1) Design a single pole low-pass filter with a 3dB bandwidth of 0.2π using bilinear transformation. 2) Obtain the system function of a digital filter from a given analog filter function using bilinear transformation where the digital filter is resonant at ωr = π/2. 3) Design a second order Butterworth bandpass filter between 300Hz to 500Hz using bilinear transformation.

Uploaded by

Bhavey Malhotra
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

MANIPAL UNIVERSITY JAIPUR

SCHOOL OF ELECTRICAL, ELECTRONICS & COMMUNICATION (SEEC)


ENGINEERING

Department of Electronics & Communication Engineering

Course Code: EC1607 Course Name: Digital Signal Processing


_________________________________________________________________________________________
Assignment-2
Q1. Design a single pole low-pass digital filter with a 3-dB bandwidth of 0.2π using bilinear transformation
applied to analog filter.
𝛺𝑐
𝐻𝑖𝑛𝑡: 𝐻𝑎 (𝑠) = , 𝑤ℎ𝑒𝑟𝑒 𝛺𝑐 𝑖𝑠 𝑡ℎ𝑒 3𝑑𝐵 𝑏𝑎𝑛𝑑𝑤𝑖𝑑𝑡ℎ 𝑜𝑓 𝑡ℎ𝑒 𝑓𝑖𝑙𝑡𝑒𝑟
𝑠 + 𝛺𝑐

Q2. The system function of an analog filter is given as


𝑠 + 0.1
𝐻𝑎 (𝑠) =
(𝑠 + 0.1)2 + 16

Obtain the system function of the digital filter, which is resonant at a frequency ω r = π/2 using bilinear
transformation.

Q3. Design a second order discrete-time butterworth filter with a cut-off frequency of 1 KHz and sampling
frequency of 104 samples/second using bilinear transformation.

Q4. Design a second order bandpass butterworth filter with a passband of 300 Hz to 500 Hz and sampling
frequency of 1500 Hz using bilinear transformation ., given prototype LPF with transfer function
𝛺𝑐
𝐻𝑎 (𝑠) =
𝑠 + 𝛺𝑐

Q5. Design a digital HPF butterworth filter with a cut off frequency 30 Hz and sampling frequency of 150 Hz
using bilinear transformation.

Q6. Determine the filter order and cut-off frequency of a digital filter with following specifications:
0.89 ≤ |𝐻(𝑒 𝑗𝜔 )| ≤ 1 0 ≤ 𝜔 ≤ 0.4 𝜋

|𝐻(𝑒 𝑗𝜔 )| ≤ 0.18 0.6𝜋 ≤ 𝜔 ≤ 𝜋

Use impulse invariance method.

You might also like