Scribd
Upload
90 views2 pages

Analog Sensor Bases: YBN-NSA-4

The document describes two analog sensor bases, the YBN-NSA-4 and HSB-NSA-6, which are designed to mount Hochiki NS series analog smoke, heat, and multi-criteria detectors. The bases are electronics-free with screw terminals for wiring and a tamper-resistant locking feature. They allow interchangeability of compatible detectors while maintaining loop continuity.

Uploaded by

mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
90 views2 pages

Analog Sensor Bases: YBN-NSA-4

The document describes two analog sensor bases, the YBN-NSA-4 and HSB-NSA-6, which are designed to mount Hochiki NS series analog smoke, heat, and multi-criteria detectors. The bases are electronics-free with screw terminals for wiring and a tamper-resistant locking feature. They allow interchangeability of compatible detectors while maintaining loop continuity.

Uploaded by

mohammad
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ANALOG SENSOR BASES

SPECIFICATIONS
Security Feature Plastic Tamper-lock
Color Bone PC / ABS Blend
Dimensions HSB-NSA-6: 6 inches
YBN-NSA-4: 4 inches
Mounting Box HSB-NSA-6: 3” & 4” Octagon &
Square
YBN-NSA-4: 3” Octagon
Compatible Detectors ALG-V, ALK-V, ALK-D, AIE-EA,
ATG-EA, ATJ-EA, ALN-V,
ACA-V

YBN-NSA-4 APPLICATION

The HOCHIKI America YBN-NSA-4 and the HSB-NSA-


6 mounting bases are electronics free and contain a
simple rugged design with screw terminals for wiring
connections. A common mounting base allows sensor
interchange and maintains loop continuity when sen-
sors are removed. A simple anti-tamper head locking
system is provided which is enabled by removing a small
plastic tab on the back of the sensor. Once locked, the
head can only be removed using a small diameter screw
driver.

HSB-NSA-6 OPERATION
STANDARD FEATURES
The YBN-NSA-4 and HSB-NSA-6 are designed specifi-
• UL & ULC Listed cally for use with the Hochiki NS Analog models AIE-
• Designed for use with all NS analog sensors EA, ALG-V, ALK-V, ALK-D, ALN-V, ATG-EA, ATJ-EA and
• Available in 4 and 6 inch models ACA-V.
• Contains a security locking tab for tamper
protection The YBN-NSA-4 and HSB-NSA-6 common mounting
bases allows for complete compatibility for all of the
PRODUCT LISTINGS Hochiki NS Series Analog sensors. The bases are
lightweight and very thin, providing a low profile once
California installed. The solder-less screw terminals enable quick
State Fire and easy wiring connections.
Marshal
CS463 7300-0410:132
S1383

MEA
284-91-E Vol. IV
3022559
Continued on back.
Specifications subject to change without notice.

Hochiki America Corporation Find latest revision at www.hochiki.com


7051 Village Drive, Suite 100 Buena Park, CA 90621-2268
Phone: 714/522-2246 Fax: 714/522-2268
Technical Support: 800/845-6692 or [email protected] F0013 10/2014
ENGINEERING SPECIFICATIONS

The base shall permit direct interchange with the HOCHIKI America AIE-EA Ionization type Smoke Sensor, ALG-V,
ALK-V Photoelectric Smoke Sensor, ALK-D Photoelectric Smoke Sensor for in-duct use, ATG-EA Heat Sensor, and
the ACA-V Multi-criteria Sensor.

The vandal-resistant, security locking feature shall be used in those areas as indicated on the drawing. The locking
feature shall be optional and can be implemented when required.

TYPICAL WIRING DIAGRAMS

YBN-NSA-4
(+)

UL LISTED
COMPATIBLE
DCP LOOP
(-) 8mA MAX.
OUTPUT

UL LISTED (+)
POWER LIMITED
SUPPLY
8mA MAX.
OUTPUT

HSB-NSA-6
(+)
UL LISTED
COMPATIBLE
DCP LOOP
(-)

UL LISTED
POWER LIMITED
SUPPLY (+)

8mA MAX. 8mA MAX.


OUTPUT OUTPUT

- OPTIONAL WIRING CONFIGURATIONS FOR REMOTE OUTPUT

NOTE: Fire alarm control panel compatibility is required for DCP products.
State-of-the-art communications protocol, DCP, allows system components (DCP sensors AIE-EA,
ALG-V, ALK-V, ALK-D, ALN-V, ACA-V, ATJ-EA and ATG-EA, bases and modules), to be used
concurrently in a system's signaling line circuit.
Hochiki America Corporation Analog Sensor Bases Specifications subject to change without notice.

You might also like