Scribd
Upload
364 views6 pages

BD 330 Plus 3000 Plus Product Description EN Antwerp Ed01

The Atlas Copco BD 330+-3000+ Purge is a heated blower purge desiccant dryer that removes moisture from compressed air through adsorption. It supplies dry air with a pressure dew point of -40°C. The dryer ensures reliability and eliminates system failures through its large pipes and vessels which allow for constant pressure dew point even at full load. It is delivered ready for use with easy installation and maintenance-friendly components designed for over three years of use.

Uploaded by

влад камр
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
364 views6 pages

BD 330 Plus 3000 Plus Product Description EN Antwerp Ed01

The Atlas Copco BD 330+-3000+ Purge is a heated blower purge desiccant dryer that removes moisture from compressed air through adsorption. It supplies dry air with a pressure dew point of -40°C. The dryer ensures reliability and eliminates system failures through its large pipes and vessels which allow for constant pressure dew point even at full load. It is delivered ready for use with easy installation and maintenance-friendly components designed for over three years of use.

Uploaded by

влад камр
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

BD 330+-3000+

ATLAS COPCO HEATED BLOWER PURGE DESICCANT DRYER

The Atlas Copco BD 330+-3000+ Purge is a heated blower purge desiccant dryer which removes
moisture from compressed air by adsorption process.

All components are mounted on a single common base frame completely wired and ready for
installation, with generously sized towers and piping to minimise pressure drop through the dryer.

The dryer can supply dry air to the compressed air system with a pressure dew point (PDP) of
minus 40 ºC.

Reliability – Keep your production up and running

The Atlas Copco BD 330+-3000+ Purge ensures peace of mind by eliminating system failures,
production downtime and costly repairs.

The dryer is built up with large pipes and vessels which results in a constant pressure dewpoint
at 100 % load conditions and an efficient regeneration. The production efficiency is guaranteed by
the control and monitoring system.

The BD 330+-3000+ Purge is delivered ready for use and its installation is straight forward with all
internal components easily accessible to facilitate the maintenance. The interval of maintenance
goes beyond three years, thanks to the durability and reliability of the electrical, mechanical and
pneumatic components.
Driving down energy cost

The Atlas Copco desiccant dryer cuts off the carbon footprint:
 Very low pressure drop 0.2 bar
 Dew point temperature sensor and controls
 Adjustable dew point set point, adapts the dryer to your needs

Reliability and cost efficiency


High-quality desiccant

Reliability
 High adsorption capacity desiccant for maximum performance
 Constant low pressure dew point -40 ºC/-40 ºF
Efficiency
 The most energy efficient drying agent
Quality
 Long lifetime

Dew point dependent switching

Reliability:
 PDP Display and alarm on the controller
Efficiency:
 No energy consumption based on the real load of the dryer
Quality:
 Real Pressure Dew Point (PDP) monitoring

Low electrical power density heater


Reliability
 Stainless steel design to ensure long life time
Efficiency
 Heater is installed in an insulated heater pipe to ensure the most energy-efficient setup
Quality
 Nickel plated heater pipe – against corrosion

Filters

Reliability
 No contamination of desiccant – Increased lifetime
Efficiency
 Easy assembly and maintenance
 No extra piping
 No requirements for filters connexion
Quality
 Protection of network - No dust coming from desiccant bed

Advanced control and monitoring system

Reliability
 Real time monitoring of all parameters to ensure your peace of mind
 User friendly interface
Quality:
 Fitted inside a real IP54 cubicle for easy cable and safety
 Comprehensive maintenance display
Working principle

The BD+ dryer consists of two towers containing activated alumina. In one tower the activated
alumina beads adsorb the moisture from the air, when saturated the activated alumina is
reactivated. After half a cycle, the tower functions are reversed.

The BD+ dryer consists of two towers containing silica gel and activated alumina desiccant. In one
tower the silica gel beads adsorb the moisture from the air, when saturated the silica gel is
reactivated. After half a cycle, the tower functions are reversed.

Wet compressed air flows upward through the desiccant which adsorbs the moisture, from bottom
to top (1). Dry air leaves the tower via the outlet.

When the desiccant is saturated, it has to be dried or regenerated. The tower is depressurized
and heated ambient air is blown through the saturated desiccant (2), via the blower (5) and heater
(6), forcing the adsorbed moisture out from top to bottom.

After regeneration, the tower is pressurised equal to the system pressure.

The dew point of the outlet air is constantly monitored and the dryer will only switch to the next
tower (3) when the desiccant is saturated, based on PDP input. During this period the dryer
consumes no energy.
Standard scope of supply
 Stainless steel butterfly valve
 Galvanized inlet and outlet piping
 Insulated heater pipe and connection pipe to vessels
 In-and Outlet air flanges
 Air cooler
 Frequency converter
 DIN or ANSI – flanges
 Pre mounted electrical cubicle
 Elektronikon control and monitoring system
 IP54 protected
 Voltage free contacts for remote alarm and warning signals
 Pressure dewpoint sensor
 Base frame with forklift slots
 Lifting holes
 PED, ASME, CRN or ML approval
Available options
 Maximum working pressure 14.5 bar (e)/210 psig
 Second PDP read out
 Pre and after filter package for GA oil injected compressor
 Pre and after filter package for Z oil free compressor
 GSM connect
 Pressure relief valves
 Sonic nozzle
 High inlet temperature variant
 High ambient temperature variant
 Dryer tower insulation
 Blower inlet filter
 External pilot air connection for low pressure inlet
 Pressure dew point -70 °C
Features and benefits
 Generously sized desiccant towers
o Enhancing drying performance and efficiency
 Pre and after filters mounted directly on dryer
o Space saving and simplified installation
 Silencers with integrated safety valve
o Operation maintained in the event of a blockage
 Units designed with low pressure drop
o Running costs minimised through lower energy consumption
 Stainless steel 2 ways valve
o High quality, corrosion resistant and hard wearing
 Desiccant overfill of approximately 30%
o Maximised performance and reduces desiccant wear
 Pressure dewpoint control with Elektronikon controller supplied as standard
o Minimises energy consumption and makes full use of the drying capacity of the
towers

You might also like