Scribd
Upload
252 views

Elastix PDF

This document provides a 6 step guide to configure an Elastix VoIP server with Netelip telephone service: 1. Sign up for Netelip service to receive SIP account credentials. 2. Install Elastix and start the configuration process. 3. Create extensions like 6000 and 6001 to receive calls. 4. Set up a SIP trunk called "Netelip" using the SIP credentials to make outbound calls. 5. Configure an outbound route to route calls through the Netelip trunk. 6. Set up an inbound route to direct incoming calls to an extension like 6001.

Uploaded by

Juanes See
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
252 views

Elastix PDF

This document provides a 6 step guide to configure an Elastix VoIP server with Netelip telephone service: 1. Sign up for Netelip service to receive SIP account credentials. 2. Install Elastix and start the configuration process. 3. Create extensions like 6000 and 6001 to receive calls. 4. Set up a SIP trunk called "Netelip" using the SIP credentials to make outbound calls. 5. Configure an outbound route to route calls through the Netelip trunk. 6. Set up an inbound route to direct incoming calls to an extension like 6001.

Uploaded by

Juanes See
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Configure Elastix with our VoIP

telephone service
This manual explains how to configure our IP telephone service with your
Elastix VoIP server.

The settings listed in this guide is a very basic configuration, you must note that
Elastix allows more options and more advanced features.

The guide explains a brief introduction to setting up Elastix with Netelip


VoIP service provider, you are responsible of adding the needed security and any
other services.

Step 1
Sign in http://www.netelip.com.

By registering you will receive an email with configuration data details of your SIP
account (username, password, and domain of our voice server)

Step 2
Install the Elastix VoIP server, http://www.elastix.org/en/downloads.html
Once installed we start the setting.

Step 3
Create one or more extensions, for example extensions 6000 and 6001,accessing
PBX -> Extensions.

Select “Generic SIP Device” and click “Submit”.


Fill out creating extensions form with minimum the following fields:

User Extension : 6000


Display Name : 6000
Secret : password for our extension

1
You can also enable more additional services to our extension, as voicemail, etc ...
Also add the extension 6001.

Step 4
Create the trunk “Netelip” to use it for outgoing calls. You can get a phone
number with Netelip to also start receiving incoming calls on your Elastix server,

We access to “Trunks”->”Add SIP Trunk” and fillout with the following fields:

Trunk Description: Netelip

In secction “Outgoing Settings”

Trunk Name: Netelip

PEER Details:
Type=friend
Username= SIP user
Context=from-pstn
Host =sip.netelip.com
Canreinvite =no
Secret=SIP password
Nat=yes ;; If our Server is behind the router.
Fromdomain=sip.netelip.com
Disallow=all
Allow=alaw
Insecure=very
Fromuser=SIP user

In “Registration” section

Register String: sip_useer:[email protected] / sip_user

Once you have completed this, click “Submit changes” and then “Apply
Configuration Changes Here “.

2
Step 5
We will create outgoing calls route through netelip.
Access to “Outbound Routes” and will fill out with following data:

Route name: outgoing_netelip

Dial pattems:
00. ;; pattern for international calls
[689] XXXXXXXX;, pattern for outgoing calls

Trunk Sequence: SIP / Netelip


SIP / Netelip trunk is the one created in step 4.

We press “Submit changes” and then “Apply Configuration Changes Here “.

Step 6
We will create now incoming calls route.

Access to “Inbound Routes” and will fill out with the following data:

Description: SIP Netelip User


DID Number: SIP Netelip User

In section “Set Destination”, select an option from those shown.


For example we can redirect incoming calls to extension 6001:
We select “Extensions” and extension 6001, press “Submit” and “Apply”.

Your Elastix VoIP server is now configured with Netelip.

Enjoy our service.

You might also like