QUALITY REQUIREMENTS

for weldinga
European (internationalb) standards for fusion welding Destructive testing
Other continued
Arc welding Copper Nickel Titanium & Zirconium Impact SS-EN 875 (ISO 9016)
SS-EN ISO 3834
Steel Aluminium Symbolic repr. ISO 2553
SS-EN ISO 9606-3 SS-EN ISO 9606-4 SS-EN ISO 9606-5 Tensile long. SS-EN 876 (ISO 5178)
Grouping of materials c c
SIS-CEN ISO/TR 15608, 20172 , 20173 , 20174 c
SS-EN ISO 4063
Proc. numbers
Tensile perp. SS-EN 895 (ISO 4136)
Gas welding Electron beam welding Laser welding
Welder qualification SS-EN 287-1 (ISO 9606-1) SS-EN ISO 9606-2 Terms & Def. SIS-CEN/TR 14599
SS-EN ISO 15609-2 SS-EN ISO 15609-3 SS-EN ISO 15609-4 (ISO/TR 25901c) Tensile cruc. SS-EN ISO 9018
WPS SS-EN ISO 15609-1
Def. weld proc. SS-EN 14610 Bend SS-EN 910 (ISO 5173)
Cast iron Titanium & Zirconium Copper
Welding procedure qualification SS-EN ISO 15607, 15610, 15611, 15612, 15613 Terms on joints SS-EN 1320 (ISO 9017)
SS-EN ISO 17659 Fracture
SS-EN ISO 15614-3 SS-EN ISO 15614-5 SS-EN ISO 15614-6 & welds
SS-EN ISO 15614-1 SS-EN ISO 15614-2 & -4 SS-EN ISO 13920 Hardness SS-EN 1043-1 & -2
Tolerances
(ISO 9015-1 & -2)
Overlay welding Tube to tube plate Beam welding
Welding operator qualification SS-EN 1418 (ISO 14732) Welding SS-EN ISO 6947,
SS-EN ISO 15614-7 SS-EN ISO 15614-8 SS-EN ISO 15614-11 positions SIS-CEN/TR 14633 Macroscopic SS-EN 1321 (ISO 17639),
NDT-personnel SS-EN 473 (ISO 9712) CR 12361 (ISO/TR 16060)
Reinforcing steel SS-EN ISO 17660
Clad steel Laser Electron beam Cast iron Hot crack SS-EN ISO 17641-1, -2 & -3
Welding coordination SS-EN 719 (ISO 14731)
SS-EN 1011-5 SS-EN 1011-6 SS-EN 1011-7 SS-EN 1011-8
(ISO/TR 17671-5) (ISO/TR 17671-6) (ISO/TR 17671-7) (ISO/TR 17671-8) Cold crack SS-EN ISO 17642-1, -2 & -3
Inspection & testing during welding SS-EN ISO 13916 Welding consumables
- Measurment of preheat and
Product SS-EN 13479 Delta ferrite SS-EN ISO 17655
interpass temp. Environment, health & safety
SS-EN 1011-2 & -3 SS-EN 1011-4
- Recommendations for welding Quality req. for
(ISO/TR 17671-2 & -3) (ISO/TR 17671-4) Fume sampling in SS-EN ISO 15011-1 till -4 & SS-EN 12074
- Comparison of methods for manufacturing
avoidance of cold cracks laboratory SIS-CEN ISO/TR 15011-5c
Technical deli- Acceptance levels for NDT
SIS-CEN ISO/TR 17844) SS-EN ISO 544
Fume sampling in very conditions
SS-EN ISO 10882-1 & -2 Radiography SS-EN 12517
breathing zone
Inspection & testing after welding Procurement SS-EN ISO 14344
SS-EN 12062 (ISO 17635), SS-EN 970 (ISO 17637),
- NDT – General rules SS-EN 1435 (ISO 17636), SS-EN 1714 (ISO 17640) Filters SS-EN ISO 15012-1 & -2 Ultrasonic SS-EN 1712, SS-EN 1713
- Visual testing Type testing SS-EN 14532-1, -2 & -3
- Radiographic testing Eye protection SS-EN 169, 170 & 171 Magnetic particle SS-EN 1291
- Ultrasonic testing SS-EN 1290 (ISO 17638) Testing SS-EN 1597-1, -2 & -3, SS-EN ISO
- Magnetic particle testing 6847, 14372, 8249, 3690 & ISO 2401
Protective clothing SS-EN 470-1, 12477 Penetrant SS-EN 1289
- Macro- & microscopic testing
- Penetrant testing SS-EN 1321 (ISO 17639), SS-EN 1298 (ISO ’missing’)
SS-EN 1598 TIG-electrodes SS-EN ISO 6848 Visual testing
Welding curtains For all imperfections SS-EN
(also macro- & ISO 5817 etc apply
Post-weld heat treatment SIS-CR ISO/TR 17663 Environm. checklist SS-EN 14717 Hard facing SS-EN 14700 (ISO/TR xxxxxc) microscopic etc)

Calibration/validation SS-EN ISO 17662

Classification of welding consumables
Steel Other materials
Quality levels & Joint preparation
Steel Aluminium Non-alloy and High strength Creep resistant Stainless and Nickel Copper Aluminium Cast iron Titanium
fine grain heat resisting
Qual.lev. fusion welding (not beam) SS-EN ISO 5817 SS-EN 30042 (ISO 10042)
SS-EN 499 SS-EN 757 SS-EN 1599 SS-EN 1600 SS-EN ISO
MMA
(ISO 2560) (ISO 18275) (ISO 3580) (ISO 3581) 14172
Quality levels for beam welding SS-EN ISO 13919-1 SS-EN ISO 13919-2
SS-EN 440 SS-EN ISO
Quality levels for cutting SS-EN ISO 9013 MIG/MAG (ISO 14341) SS-EN 12534 SS-EN 12070 SS-EN SS-EN ISO 1071 SS-EN ISO
(ISO 16834) (ISO 21952c) 14640 18273 24034
Joint preparation SS-EN ISO 9692-1 & -2 SS-EN ISO 9692-3 SS-EN 1668 SS-EN 12072 SS-EN ISO (ISO 24373c)
TIG
(ISO 636) (ISO 14343) 18274

Other Electrodes etc for SS-EN 756 SS-EN 14295 SS-EN 12070
Joint details Pressurized comp./Steel constr. submerged arc (ISO 14171) (ISO 26304c) (ISO 24598c)
SS-EN 1708-1 & -2 (ISO ’missing’)
Fluxes for
Geometric imperfections Fusion welding/Pressure welding SS-EN ISO 6520-1 & -2 submerged arc SS-EN 760 (ISO 14174)

Thermal cuts SS-EN 12584 (ISO ’missing’) SS-EN 758 SS-EN 12535 SS-EN 12071 SS-EN 12073
Cored wires (ISO 17632) (ISO 18276) (ISO 17634) (ISO 17633) SS-EN ISO
Designation system SIS-CEN ISO/TS 17845 1071
SS-EN 12536 SS-EN 12536
See continued Gas welding (ISO 636) (ISO ’missing’)
a
References in fields with this collor are directly linked to SS-EN ISO 3834 (ex SS-EN 729)
b
Shielding gas SS-EN 439 (ISO 14175)
The ISO-reference in brackets is in most cases identical with or is based on corresponding SS-EN
c
Not published August 2006 Mathias Lundin, Swedish Welding Commission, August 2006