GS-5220-48P4X Series

L3 48-Port 10/100/1000T 802.3at PoE + 4-Port

10G SFP+ Managed Switch

Physical Port
• 48 10/100/1000BASE-T Gigabit RJ45 copper ports with 48-port
IEEE 802.3af/at PoE+ injector function
• 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-
SX/LX/BX SFP
• RJ45 console interface for switch basic management and setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus/end-
span PSE
IPv6 Routing and 10G Ethernet Switch Solutions with PoE Plus for SMBs
• Backward compatible with IEEE 802.3af Power over Ethernet
PLANET GS-5220-48P4X series of high-density, Layer 3 Managed PoE Switch
• Up to 48 ports of IEEE 802.3af/IEEE 802.3at devices powered
series featuresing PLANET intelligent PoE functions to improve the availability of
• Supports PoE power up to 36 watts for each PoE port
critical business applications. ItThey provides IPv6/IPv4 dual stack management
• Auto detects powered device (PD)
and built-in Layer 3 dynamic OSPFv2 and static routing capability along with
• Circuit protection prevents power interference between ports
48 10/100/1000BASE-T ports featuring IEEE 802.3at PoE+ and 4 additional 10G
• Remote power feeding up to 100 meters
SFP+ uplink slots. With a total power budget of up to 400/600 watts for different
• PoE management
kinds of PoE applications, the GS-5220-48P4X series provides a quick, safe and
–– Total PoE power budget control
cost-effective PoE network solution for small businesses and enterprises.
–– Per port PoE function enable/disable
48 x Gigabit PoE+ RJ45
–– PoE admin-mode control
–– PoE port power feeding priority
–– Per PoE port power limitation
–– PD classification detection
–– Temperature threshold control
–– PD alive check
–– PoE schedule

RJ45 Type Console 4 x 1G/10G SFP+ Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and

The GS-5220-48P4X series can handle extremely large amounts of data in a secure IEEE 802.3x pause frame flow control (full-duplex)

topology linking to deploying Power over Ethernet networks, data center/service • High performance of Store-and-Forward architecture and runt/

provider backbone or high capacity servers. It can work with a 10Gbps SFP+ server CRC filtering eliminates erroneous packets to optimize the

adapter to help SMBs build the 10Gbps Ethernet network providing 10Gbps NAS network bandwidth

(Network Attached Storage) or heavy transmission of video streaming service. • Storm Control support
–– Broadcast/Multicast/Unknown unicast
• Supports VLAN
–– IEEE 802.1Q tagged VLAN
–– Up to 255 VLANs groups, out of 4094 VLAN IDs
–– Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)
–– Private VLAN Edge (PVE)
–– Protocol-based VLAN
–– MAC-based VLAN
–– Voice VLAN
–– GVRP (GARP VLAN Registration Protocol)
• Supports Spanning Tree Protocol
–– IEEE 802.1D Spanning Tree Protocol (STP)

1
 GS-5220-48P4X Series

Redundant Ring, Fast Recovery for Critical Network Applications –– IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–– IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
The GS-5220-48P4X series supports redundant ring technology and features
spanning tree by VLAN
strong, rapid self-recovery capability to prevent interruptions and external
–– BPDU Guard
intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring
• Supports Link Aggregation
Protection Switching) technology and Spanning Tree Protocol (802.1w RSTP)
–– 802.3ad Link Aggregation Control Protocol (LACP)
into customer’s network to enhance system reliability and uptime in harsh
–– Cisco ether-channel (static trunk)
environments. In a certain simple Ring network, the recovery time could be less
–– Maximum 26 trunk groups with 4 ports for each trunk group
than 10ms to quickly bring the network back to normal operation.
–– Up to 80Gbps bandwidth (full duplex mode)
Layer 3 Routing Support • Provides port mirror (many-to-1)
The GS-5220-48P4X series enables the administrator to conveniently boost • Port mirroring to monitor the incoming or outgoing traffic on a
network efficiency by configuring Layer 3 IPv4/IPv6 VLAN static routing manually, particular port
and the OSPFv2 (Open Shortest Path First) settings automatically. The OSPF is • Loop protection to avoid broadcast loops
an interior dynamic routing protocol for autonomous system based on link state. • Supports ERPS (Ethernet Ring Protection Switching)
The protocol creates a database for link state by exchanging link states among • Compatible with Cisco uni-directional link detection(UDLD) that
Layer 3 switches, and then uses the Shortest Path First algorithm to generate a monitors a link between two switches and blocks the ports on
route table based on that database. both ends of the link if the link fails at any point between the
two devices
Cybersecurity Network Solution to Minimize Security Risks • Link Layer Discovery Protocol (LLDP)
The cybersecurity feature included to protect the switch management in a mission-
critical network virtually needs no effort and cost to install. The SSH, TLS and SSL Layer 3 Features
protocols are utilized to provide strong protection against advanced threats. The • IP dynamic routing protocol supports OSPFv2
network administrator can now construct highly-secure corporate networks with • IPv4/IPv6 hardware static routing
considerably less time and effort than before. • Routing interface provides per VLAN routing mode
• IP interfaces (Max. 128 VLAN interfaces)
Flexible and Extendable 10Gbps Ethernet Solution • Routing table (Max. 128 routing entries)
Each of the SFP+ slot supports dual speed 10GBASE-SR/LR or 1000BASE-SX/
LX/BX, meaning the administrator now can flexibly choose the suitable SFP+/ Quality of Service
SFP transceiver according to the transmission distance or the transmission speed • Ingress Shaper and Egress Rate Limit per port bandwidth
required to extend the network efficiently. With its 4-port, 10Gbps Ethernet link control
capability, the GS-5220-48P4X series provides broad bandwidth and powerful • 8 priority queues on all switch ports
processing capacity. • Traffic classification
–– IEEE 802.1p CoS
Redundant AC/DC Power Supply to Ensure Continuous Operation –– TOS/DSCP/IP precedence of IPv4/IPv6 packets
The GS-5220-48P4XR and GS-5220-48PL4XR are particularly equipped with one –– IP TCP/UDP port number
100~240V AC power supply unit and one 36~60V DC power supply unit to provide –– Typical network application
an enhanced reliable and scalable redundant power supply. The continuous power • Strict priority and Weighted Round Robin (WRR) CoS policies
system is specifically designed to fulfill the demands of high-tech facilities requiring • Supports QoS and In/Out bandwidth control on each port
the highest power integrity. With the 36~60V DC power supply, it is able to act as • Traffic-policing on the switch port
a telecom-level device that can be located in the electronic room. • DSCP remarking

Ground 100~240V AC Power Multicast

• Supports IPv4 IGMP snooping v1, v2 and v3
• Supports IPv6 MLD snooping v1 and v2
• Querier mode support
• IPv4 IGMP snooping port filtering
• IPv6 MLD snooping port filtering
• Multicast VLAN Registration (MVR) support

36~60V DC Power
Security
• Authentication
–– IEEE 802.1x port-based/MAC-based network access
authentication

2
 GS-5220-48P4X Series

Convenient and Smart ONVIF Devices with Detection Feature –– Built-in RADIUS client to cooperate with the RADIUS servers
PLANET has newly developed an awesome feature -- ONVIF Support -- which is –– TACACS+ login users access authentication
specifically designed for co-operating with Video IP Surveillances. From the GS- –– RADIUS/TACACS+ users access authentication
5220-48P4X series’ GUI, clients just need one click to search and show all of • Access Control List
the ONVIF devices via network application. In addition, clients can upload floor –– IP-based Access Control List (ACL)
images to switch and allows for deployment location of surveillance devices for –– MAC-based Access Control List
easier inspection and planning. Moreover, clients can get real-time surveillance’s • Source MAC/IP address binding
information and online/offline status, and also allows PoE reboot control from GUI. • DHCP Snooping to filter untrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• IP address access management to prevent unauthorized
intruder

Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
–– Console/Telnet Command Line Interface
–– Web switch management
Centralized Power Management for Gigabit Ethernet PoE Networking –– SNMP v1, v2c, and v3 switch management
To fulfill the needs of higher power required PoE network applications with Gigabit –– SSH, TLS, SSL and SNMP v3 secure access
speed transmission, the GS-5220-48P4X series features IEEE 802.3at PoE+ that • SNMP Management
combines up to 36 watts of power output and data per port over one Cat5E/6 –– Four RMON groups (history, statistics, alarms and events)
Ethernet cable. It is designed specifically to meet the demand of higher power –– SNMP trap for interface Link Up and Link Down notification
consuming network PD (powered device) such as IR, PTZ, speed dome cameras • IPv6 IP address/NTP/DNS management
or even box-type IP camera with a built-in fan and heater. Compliant with both • Built-in Trivial File Transfer Protocol (TFTP) client
802.3at and 802.3af PoE, it allows more flexibility in power requirement for a • BOOTP and DHCP for IP address assignment
variety of PDs. • System Maintenance
–– Firmware upload/download via HTTP/TFTP
Built-in Unique PoE Functions for Surveillance Management –– Reset button for system reboot or reset to factory default
As a managed PoE Switch for surveillance network, the GS-5220-48P4X series –– Dual images
features four special PoE management functions: • DHCP Relay and DHCP Option 82
■ PD alive check • DHCP Server
■ Scheduled power recycling • User Privilege levels control
■ PoE schedule • NTP (Network Time Protocol)
■ PoE usage monitoring • Network Diagnostic
–– ICMPv6/ICMPv4 remote ping
Intelligent Powered Device Alive Check –– Cable diagnostic technology provides the mechanism to detect
The GS-5220-48P4X series can be configured to monitor connected PD status in and report potential cabling issues
real time via ping action. Once the PD stops working and has no response, the • SMTP/Syslog remote alarm
GS-5220-48P4X series will resume the PoE port power and bring the PD back to • System Log
work. It will greatly enhance the network reliability through the PoE port resetting • PLANET Smart Discovery Utility for deployment management
the PD’s power source and reduce administrator management burden. • Smart fan with speed control

Step 1 Step 2 Redundant Power System (GS-5220-48P4XR

PD Status PT PoE Camera No Response...... and GS-5220-48PL4XR)
Good!!
Ping Request • Redundant 100~240V AC/36-60V DC dual power
Ping Request • Active-active redundant power failure protection
Ping Echo Check alive status for 3 times
• Backup of catastrophic power failure on one supply
Step 3 Step 4 • Fault tolerance and resilience
Alarm Notification
PoE PD Alive!!
PoE

ON OFF
ON ON

Restart PoE device if without response

3
 GS-5220-48P4X Series

Scheduled Power Recycling

The GS-5220-48P4X series allows each of the connected PoE IP cameras to reboot at a specific time each week. Therefore, it will reduce the chance of IP
camera crash resulting from buffer overflow.

Automatically Reboot
S M T W T F S Every Friday 23:00
CPU/Buffer
Load 85%

PoE CPU/Buffer
Load 10%

ON OFF ON PoE PT Camera

PoE Schedule for Energy Saving
Besides IP surveillance, the GS-5220-48P4X series is certainly applicable to construct any PoE network including VoIP and wireless LAN. Under the trend of
energy saving worldwide and contributing to environment protection on the Earth, the GS-5220-48P4X series can effectively control the power supply besides
its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified
time intervals and it is a powerful function to help SMBs or enterprises save power and money.

8AM 5PM 5PM 8AM

PoE PoE PoE PoE

PoE PoE PoE PoE

Power Power Power Power

Power Power Power Power Off Off Off On
On On On On
6 Watts 6 Watts 12 Watts 12 Watts
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts/hr during off-business hours
Total consumption of 36 watts/hr
Total Saved = 10800 Watts/month

PoE 1000Base-T UTP with PoE

IPv4 and IPv6 VLAN Routing for Secure and Flexible Management
To help customer stay on top of business, the GS-5220-48P4X series does not only offer ultra high transmission performance, but also IPv4/IPv6 VLAN
routing feature which allows to cross over different VLAN groups and IP addresses for the purpose of having a highly-secure, flexible management.

Robust Layer 2 Features

The GS-5220-48P4X series can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLAN, private
VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/MLD snooping. The GS-5220-48P4X series provides
802.1Q tagged VLAN, and the VLAN groups allowed will be maximally up to 256. Via aggregation of supporting ports, the GS-5220-48P4X series allows
the operation of a high-speed trunk combining multiple ports. The switch enables a maximum of up to 26 trunk groups with 4 ports for each trunk group and
supports connection fail-over as well.

Powerful Security
The GS-5220-48P4X series offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to
restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network application. Its protection
mechanism also comprises 802.1x Port-based and MAC-based customer and device authentication. As to private VLAN function, communications between
edge ports can be protected to ensure customer privacy.

Enhanced Security and Traffic Control

The GS-5220-48P4X series also provides functions of DHCP snooping, IP source guard and dynamic ARP inspection so as to prevent IP from attacking
and discarding ARP packets with invalid MAC address. The network administrators can now construct a highly-secure corporate network with considerably
less time and effort than before.

4
 GS-5220-48P4X Series

IPv6/IPv4 Dual Stack

As the GS-5220-48P4X series supports the IPv6 Protocol, it helps SMBs and enterprises to step in the IPv6 era with the lowest investment, meaning the
existing network facilities need not be replaced.

Application
WEB TELNET SSL ICMP
Transport Layer
SNMP SSH NTP DHCP
IPv4 IPv6
Stack Stack

IPv4 Network IPv6 Network

IPv4 Management Host IPv6 Management Host

Efficient and Secure Management

For efficient management, the GS-5220-48P4X series is equipped with console, Web and SNMP management interfaces. With the built-in Web-based
management interface, the GS-5220-48P4X series offers an easy-to-use, platform-independent management and configuration facility. The GS-5220-48P4X
series supports standard Simple Network Management Protocol (SNMP) and can be managed via any standard-based management software. For text-
based management, the GS-5220-48P4X series can be accessed via Telnet and the console port. Moreover, the GS-5220-48P4X series offers secure remote
management by supporting SSH, TLS, SSL and SNMP v3 connection which encrypt the packet content at each session.

01010101010110010101010100010101010
01010101010110010101010100010101010
01010101010110010101010100010101010

Computer

SSL SNMPv3 SSH

More and more engineers or administrators use Cisco command to manage Ethernet switch. For reducing product learning time, the GS-5220-48P4X series
offers Cisco-like command and customers do not need to learn new command. With easy and friendly management interfaces, and plenty of management
functions included, the GS-5220-48P4X series is the best choice for ISPs to build the IPv6 FTTx edge service and for SMBs to connect with the IPv6
network.

5
 GS-5220-48P4X Series

Intelligent SFP Diagnosis Mechanism

The GS-5220-48P4X series supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time
parameters of the SFP, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Digital Diagnostic Monitor (DDM)

Voltage

6
4 8

2 10
Ammeter

0 12 30

V
20 40

10 50

0 60

mA
Temperature

50

25 75

0 100

°C

0
-20 20

-40 40

-60 60

dBm
0
-20 20

-40 40

-60 60

Power Transceiver
dBm

Power Receiver

6
 GS-5220-48P4X Series

Applications
Excellent 10Gbps High Bandwidth for PoE Core Networks
Providing up to 48 PoE+, in-line power interfaces and four 10 SFP+ interfaces, the GS-5220-48P4X series can easily build a power for IP camera system
centrally controlled by the enterprise. It can work with 8-/16-/32-channel NVR and surveillance software to perform comprehensive security monitoring. For
instance, the PoE switch can combine with one 32-channel NVR and one 8-channel NVR; that is, each of its PoE ports can link to a specific PoE IP camera
for the administrator to efficiently manage the surveillance system on one site. With the four built-in SFP+ ports, the GS-5220-48P4X series provides the
uplink to the backbone network through the 10G Ethernet SR/LR SFP+ modules. It further improves the network efficiency and protects the network clients
by offering the security and QoS features.

Mail Server AD Server File Server

10G 10G 10G

L3 10G Core Switch

IP Camera IP Camera
1000BASE-T UTP
Up to 48 IP Cameras 10G 10GBASE-SR/LR Fiber-optic

Layer 3 VLAN Routing and PoE Application

The GS-5220-48P4X series features IEEE 802.3at PoE+ that combines up to 36-watt power output per port. Its PoE budget is up to 600 watts which can
deploy up to 48 PoE PD devices. With the built-in robust IPv4/IPv6 Layer 3 traffic routing protocol, the GS-5220-48P4X series ensures reliable routing
between VLANs and network segments. The routing protocols can be applied by VLAN interface with up to 128 routing entries. The GS-5220-48P4X and
GS-5220-48P4XR are certainly a cost-effective and ideal solution for enterprises.

VLAN Routing + PoE Applications

PoE

PoE

VoI
PP
hon
VL e
AN (PoE)
100 IP S
Do urv
ma eilla
in VL n
B1
92. AN ce (Po
168 300 E
.10 Do )
.x/2 ma
4 in A
192
.16
8.3
0.x
/24
Layer 3 IP Static Routing

10G PoE

NV
R
Co IP P Serv
ntro BX er
l Ce Ser
VL nte ver
AN r Wir
1D eles
om s
ain VL AP (P
192 AN
.16 200 oE)
8.0 Do
.x/2 ma
4 in C1
92.
168
1000BASE-T UTP with PoE .20
.x/2
PoE

10G 10GBASE-SR/LR Fiber-optic 4

7
 GS-5220-48P4X Series

Specifications
Product GS-5220-48P4X GS-5220-48P4XR GS-5220-48LP4X GS-5220-48PL4XR
Hardware Specifications
Copper Ports 48 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
4 10GBASE-SR/LR SFP+ interfaces (Port-49 to Port-52)
SFP+ Slots
Compatible with 1000BASE-SX/LX/BX SFP transceiver
Console 1 x RS232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 176Gbps/non-blocking
Throughput 130Mpps@64Bytes
Address Table 16K entries, automatic source address learning and aging
Shared Data Buffer 32M bits
IEEE 802.3x pause frame for full duplex
Flow Control
Back pressure for half duplex
Jumbo Frame 10K bytes
< 5 sec: System reboot
Reset Button
> 5 sec: Factory default
Dimensions (W x D x H) 440 x 300 x 44.5 mm, 1U height
Weight 4950g 4955g 4970g 4975g
System:
SYS (Green)
AC/PWR (Green)
Ring (Green)
DC (Green) (GS-5220-48P4XR and GS-5220-48PL4XR Only)
Fan1/2/3 Alert (Red)
LED PoE PWR Alert (Red)
PoE Ethernet Interfaces (Port-1 to Port-48):
PoE-in-use (Orange)
Ethernet Interfaces (Port-1 to Port-48):
1000 LNK/ACT (Green), 10/100 LNK/ACT (Orange)
1/10G SFP+ Interfaces (Port-49 to Port-52):
1G (Green), 10G (Orange)
AC: Max. 461 AC: Max. 680
watts/11582 BTU watts/2333 BTU
Power Consumption Max. 461 watts/1582 BTU Max. 680 watts/2333 BTU
DC: Max. 36.6 DC: Max. 36.6
watts/124.88 BTU watts/124.88 BTU
AC 100~240V, AC 100~240V, AC 100~240V, AC 100~240V,
Power Requirements – AC
50/60Hz, 7A 50/60Hz, 7A 50/60Hz, 8A 50/60Hz, 8A
Power Requirements – DC -- DC 36~60V, 2A -- DC 36~60V, 2A
ESD Protection 6KV DC
Fan 3 smart fans
Power over Ethernet
PoE Standard IEEE 802.3af/802.3at PoE PSE
PoE Power Supply Type End-span
PoE Power Output Per port 54V DC, 36 watts (max.)
Power Pin Assignment End-span: 1/2(+), 3/6(-)
PoE Power Budget 400 watts (max.) 400 watts (max.) 600 watts (max.) 600 watts (max.)
PoE Ability PD @ 7 watts 48 units 48 units 48 units 48 units
PoE Ability PD @ 15 watts 26 units 26 units 40 units 40 units
PoE Ability PD @ 30 watts 13 units 13 units 20 units 20 units
Layer 2 Management Functions
Port disable/enable
Port Configuration Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Display each port’s speed duplex mode, link status, flow control status,
Port Status
auto-negotiation status, trunk status

TX/RX/Both
Port Mirroring
Many-to-1 monitor

802.1Q tagged VLAN

Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs

8
 GS-5220-48P4X Series

IEEE 802.3ad LACP/static trunk

Link Aggregation
26 groups with 4 port per trunk
IEEE 802.1D Spanning Tree Protocol (STP)
Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
Traffic classification based, strict priority and WRR
8-level priority for switching:
- Port number
QoS
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/ToS field in IP packet

IGMP (v1/v2/v3) snooping, up to 255 multicast groups

IGMP Snooping
IGMP querier mode support

MLD (v1/v2) snooping, up to 255 multicast groups

MLD Snooping
MLD querier mode support

IP-based ACL/MAC-based ACL

Access Control List
Up to 256 entries
Per port bandwidth control
Bandwidth Control Ingress: 100Kbps~1000Mbps
Egress: 100Kbps~1000Mbps
Layer 3 Functions
IP Interfaces Max. 128 VLAN interfaces
Routing Table Max. 128 routing entries
IPv4 OSPFv2
Routing Protocols IPv4 hardware static routing
IPv6 hardware static routing
Management
Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c
Secure Management Interfaces SSH, TLS, SSL, SNMP v3
RFC 2618 RADIUS Client MIB
RFC 2863 IF-MIB
RFC 1213 MIB-II
RFC 2933 IGMP-STD-MIB
RFC 1493 Bridge MIB
RFC 3411 SNMP-Frameworks-MIB
RFC 1643 Ethernet MIB
RFC 4292 IP Forward MIB
SNMP MIBs RFC 2863 Interface MIB
RFC 4293 IP MIB
RFC 2665 Ether-Like MIB
RFC 4836 MAU-MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
IEEE 802.1X PAE
RFC 2737 Entity MIB
LLDP
MAU-MIB
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3 10BASE-T
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3u 100BASE-TX/100BASE-FX
RFC 768 UDP
IEEE 802.3z Gigabit SX/LX
RFC 793 TFTP
IEEE 802.3ab Gigabit 1000T
RFC 791 IP
IEEE 802.3ae 10Gb/s Ethernet
RFC 792 ICMP
IEEE 802.3x flow control and back pressure
RFC 2068 HTTP
Standards Compliance IEEE 802.3ad port trunk with LACP
RFC 1112 IGMP v1
IEEE 802.1D Spanning Tree Protocol
RFC 2236 IGMP v2
IEEE 802.1w Rapid Spanning Tree Protocol
RFC 3376 IGMP v3
IEEE 802.1s Multiple Spanning Tree Protocol
RFC 2710 MLD v1
IEEE 802.1p Class of Service
FRC 3810 MLD v2
IEEE 802.1Q VLAN tagging
RFC 2328 OSPF v2
IEEE 802.1x Port Authentication Network Control
ITU G.8032 ERPS Ring
ITU-T G.8032 ERPS Ring
Environment
Temperature: 0 ~ 50 degrees C
Operating
Relative Humidity: 5 ~ 95% (non-condensing)

Temperature: -10 ~ 70 degrees C

Storage
Relative Humidity: 5 ~ 95% (non-condensing)

9
 GS-5220-48P4X Series

Ordering Information
GS-5220-48P4X L3 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch
GS-5220-48P4XR L3 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Redundant Power
GS-5220-48PL4X L3 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch (600W)
GS-5220-48PL4XR L3 48-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch with System Redundant Power (600W)

Related Products
GS-5220-24P4X L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch
GS-5220-24P4XR L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Redundant Power
GS-5220-24PL4X L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch
GS-5220-24PL4XR L3 24-Port 10/100/1000T 802.3at PoE + 4-Port 10G SFP+ Managed Switch with Redundant Power

Available 10Gbps Modules

CB-DASFP-0.5M 10G SFP+ Directly-attached Copper Cable (0.5m in length)
CB-DASFP-2M 10G SFP+ Directly-attached Copper Cable (2m in length)
MTB-SR 10GBASE-SR mini-GBIC module - 300m
MTB-LR 10GBASE-LR mini-GBIC module – 10km
MTB-LA20 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 20km
MTB-LB20 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 20km
MTB-LA40 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 40km
MTB-LB40 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 40km
MTB-LA60 10GBASE-LX (WDM,TX:1270nm) mini-GBIC module - 60km
MTB-LB60 10GBASE-LX (WDM,TX:1330nm) mini-GBIC module - 60km

Available 1000Mbps Modules

MGB-GT SFP-Port 1000BASE-T Module
MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 220/550m
MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km
MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km
MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km
MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km
MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km
MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km
MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km
MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km
MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km
MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km
MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km

PLANET Technology Corporation GS-5220-48P4X Series

11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231,
Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2019 PLANET Technology Corp. All rights reserved.
Email: [email protected] www.planet.com.tw
10