Scribd
Upload
33 views2 pages

Course Name: Microprocessors and Microcontrollers Course ID: 10636428 Topic: Final Assignment Date: 10/05/2020

This document provides instructions for a final assignment in a Microprocessors and Microcontrollers course. Students are asked to design a temperature alarm system using an Arduino Uno board, LCD, DC motor, temperature sensor, and push buttons. The system will allow the user to set a threshold temperature using buttons, monitor the current temperature, and activate a fan if the threshold is exceeded, displaying readings on the LCD. Teams of two students will simulate and demonstrate their circuits in TinkerCAD by the deadline and submit identical reports and their circuit links to the specified Moodle assignment.

Uploaded by

Khalid W Al-sheakh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
33 views2 pages

Course Name: Microprocessors and Microcontrollers Course ID: 10636428 Topic: Final Assignment Date: 10/05/2020

This document provides instructions for a final assignment in a Microprocessors and Microcontrollers course. Students are asked to design a temperature alarm system using an Arduino Uno board, LCD, DC motor, temperature sensor, and push buttons. The system will allow the user to set a threshold temperature using buttons, monitor the current temperature, and activate a fan if the threshold is exceeded, displaying readings on the LCD. Teams of two students will simulate and demonstrate their circuits in TinkerCAD by the deadline and submit identical reports and their circuit links to the specified Moodle assignment.

Uploaded by

Khalid W Al-sheakh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Course Name: Microprocessors and Microcontrollers

Course ID: 10636428


Topic: Final assignment
Date: 10/05/2020

Assignment brief:
 You are required to demonstate a temperature alarm system.
 You must use all of the following components:
o Arduino Uno board, LCD, DC Motor, Temperature Sensor (of your
choice), Push Buttons.
 Use the push buttons to adjust a threshold temperature.
 Using the sensor to detect if the threshold temperature is reached.
 If the temperature is above the selected temperature, then turn on the
fan until the temperature is below the threshold.
 The LCD is used to display the set threshold temperature and the
current temperature form the sensor.
Guidlines:

 Build and demonstrate your circuit in tinkerCAD:


o You must demonstrate that your circuit works in simulation.

 Work in teams of two. Mention the team members on your reports.

 Each team member to submit his/her report to Moodle, the reports should be
identical for the team.

 You must submit both the tinkerCAD circuit link and a word/pdf report.

 The duration of this assignment is 1 week (17th/May/2020).

 Submission is by Moodle:
o https://moodle.najah.edu/mod/assign/view.php?id=136622
Detailed steps:
You can choose to use the following circuit schemaric as guidline:

You might also like