Scribd
Upload
60 views

Lecture 2 Equilibrium of Particle PDF

The document provides an overview of objectives and activities for a lesson on equilibrium of particles and coplanar force systems. The key objectives are to be able to draw a free body diagram (FBD) and apply equations of equilibrium to solve a 2-D problem. The lesson includes reading quizzes, examples of applications of concepts, explanations of FBDs and equations of equilibrium, and group problem solving activities.

Uploaded by

Ismail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
60 views

Lecture 2 Equilibrium of Particle PDF

The document provides an overview of objectives and activities for a lesson on equilibrium of particles and coplanar force systems. The key objectives are to be able to draw a free body diagram (FBD) and apply equations of equilibrium to solve a 2-D problem. The lesson includes reading quizzes, examples of applications of concepts, explanations of FBDs and equations of equilibrium, and group problem solving activities.

Uploaded by

Ismail
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

EQUILIBRIUM OF A PARTICLE, THE FREE-BODY

DIAGRAM & COPLANAR FORCE SYSTEMS


Today’s Objectives:
Students will be able to :
a) Draw a free body diagram (FBD), and, In-Class Activities:
b) Apply equations of equilibrium to solve • Reading Quiz
a 2-D problem. • Applications
• What, Why and How of
a FBD
• Equations of Equilibrium
• Analysis of Spring and
Pulleys
• Concept Quiz
• Group Problem Solving
• Attention Quiz
READING QUIZ

1) When a particle is in equilibrium, the sum of forces acting


on it equals ___ . (Choose the most appropriate answer)
A) A constant B) A positive number C) Zero
D) A negative number E) An integer

2) For a frictionless pulley and cable, tensions in the cable


(T1 and T2) are related as _____ .
A) T1 > T2
B) T1 = T2
C) T1 < T2 T1
T2
D) T1 = T2 sin 
APPLICATIONS

The crane is lifting a load. To


decide if the straps holding the
load to the crane hook will fail,
you need to know the force in the
straps. How could you find the
forces?

Straps
APPLICATIONS
(continued)
For a spool of given
weight, how would you
find the forces in cables
AB and AC? If designing
a spreader bar like this
one, you need to know the
forces to make sure the
rigging doesn’t fail.
APPLICATIONS
(continued)

For a given force exerted on the boat’s towing pendant, what are
the forces in the bridle cables? What size of cable must you use?
COPLANAR FORCE SYSTEMS
(Section 3.3)

This is an example of a 2-D or


coplanar force system.
If the whole assembly is in
equilibrium, then particle A is
also in equilibrium.

To determine the tensions in


the cables for a given weight
of cylinder, you need to learn
how to draw a free body
diagram and apply the
equations of equilibrium.
THE WHAT, WHY AND HOW OF
A FREE BODY DIAGRAM (FBD)

Free body diagrams are one of the most important things for you
to know how to draw and use for statics and other subjects!

What? - It is a drawing that shows all external forces acting


on the particle.

Why? - It is key to being able to write the equations of


equilibrium—which are used to solve for the unknowns
(usually forces or angles).
How?
1. Imagine the particle to be isolated or cut free from its
surroundings.
2. Show all the forces that act on the particle.
Active forces: They want to move the particle.
Reactive forces: They tend to resist the motion.
3. Identify each force and show all known magnitudes and
directions. Show all unknown magnitudes and / or directions
as variables. y

FBD at A FB
30˚
FD A A x

FC = 392.4 N (What is this?)


Note : Cylinder mass = 40 Kg
EQUATIONS OF 2-D EQUILIBRIUM
y
FBD at A Since particle A is in equilibrium, the
FB net force at A is zero.
30˚
FD A A x So FB + FC + FD = 0
A
FC = 392.4 N or F = 0
FBD at A
In general, for a particle in equilibrium,
 F = 0 or
 Fx i +  Fy j = 0 = 0 i + 0 j (a vector equation)
Or, written in a scalar form,
Fx = 0 and  Fy = 0
These are two scalar equations of equilibrium (E-of-E).
They can be used to solve for up to two unknowns.
EQUATIONS OF 2-D EQUILIBRIUM (continued)
y
FBD at A
FB
30˚
A x
FD A

FC = 392.4 N

Note : Cylinder mass = 40 Kg

Write the scalar E-of-E:


+   Fx = FB cos 30º – FD = 0
+   Fy = FB sin 30º – 392.4 N = 0
Solving the second equation gives: FB = 785 N →
From the first equation, we get: FD = 680 N ←
SIMPLE SPRINGS

Spring Force = spring constant * deformation of spring


or F=k*s
CABLES AND PULLEYS

With a frictionless pulley and cable

T1 = T2.

T1
T2
EXAMPLE
Given: The box weighs 550 lb and
geometry is as shown.
Find: The forces in the ropes AB
and AC.

Plan:
1. Draw a FBD for point A.
2. Apply the E-of-E to solve for the forces in ropes AB
and AC.
EXAMPLE (continued)

y FC FBD at point A
FB
5 3
30˚ 4
A x

FD = 550 lb

Applying the scalar E-of-E at A, we get;


+   F x = FB cos 30° – FC (4/5) = 0
+   F y = FB sin 30° + FC (3/5) - 550 lb = 0
Solving the above equations, we get;
FB = 478 lb and FC = 518 lb
CONCEPT QUESTIONS

1000 lb
1000 lb 1000 lb
(A) (B) (C)
1) Assuming you know the geometry of the ropes, you cannot
determine the forces in the cables in which system above?
2) Why?
A) The weight is too heavy.
B) The cables are too thin.
C) There are more unknowns than equations.
D) There are too few cables for a 1000 lb
weight.
GROUP PROBLEM SOLVING
Given: The mass of lamp is 20 kg
and geometry is as shown.
Find: The force in each cable.

Plan:

1. Draw a FBD for Point D.


2. Apply E-of-E at Point D to solve for the unknowns (FCD &
FDE).
3. Knowing FCD, repeat this process at point C.
GROUP PROBLEM SOLVING (continued)

FBD at point D
y FDE

FCD 30˚
D x

W = 20 (9.81) N

Applying the scalar E-of-E at D, we get;


+  Fy = FDE sin 30° – 20 (9.81) = 0
+  Fx = FDE cos 30° – FCD = 0
Solving the above equations, we get:
FDE = 392 N and FCD = 340 N
GROUP PROBLEM SOLVING (continued)

FBD at point C
FAC y
5
4
3 FCD =340 N
C x
FBC
45˚

Applying the scalar E-of-E at C, we get;


+  Fx = 340 – FBC sin 45° – FAC (3/5) = 0
+   Fy = FAC (4/5) – FBC cos 45° = 0
Solving the above equations, we get;
FBC = 275 N and FAC = 243 N
ATTENTION QUIZ

1. Select the correct FBD of particle A.

30 A 40

100 lb

F1 F2
A
A) B)
30 40°
100 lb
A
F F1 F2
C) 30° D) 30° 40°
A
A
100 lb 100 lb
ATTENTION QUIZ

2. Using this FBD of Point C, the sum of F2


forces in the x-direction ( FX) is ___ .
20 lb 50°
Use a sign convention of +  . C

A) F2 sin 50° – 20 = 0 F1

B) F2 cos 50° – 20 = 0
C) F2 sin 50° – F1 = 0
D) F2 cos 50° + 20 = 0

You might also like