WHY? WHERE? WHAT?

- UNDERSTANDING
UCC

Presented by

Mariana Fradman, MBA NYCPA President & Mentor Program

Chairperson Member of the Advisory Board of the Institute of
Paralegal Studies SCPS, New York University

March 16, 2010

NEW YORK, NEW

YORK
 MARIANA FRADMAN

Mariana Fradman is a Real Estate Paralegal at Blank Rome LLP. Ms. Fradman and her
family immigrated to the United States in January 1992. For two years, she worked odd
jobs that underpaid her and provided no benefits or vacations. But she wanted more. So
in 1994, she set out for her legal studies degree at NYC Technical College. While there,
she volunteered both as a counselor at NYPIRG’s Small Claims Court Group and as a
legal assistant in the Brooklyn Bar Association’s divorce and elder law clinics. There,
she interviewed clients, contacted support agencies on clients' behalf, drafted litigation
documents and assisted senior citizens with governmental entitlement and estate
matters. She was happy to be useful and helpful.

In 1996, she was awarded her Associate in Applied Sciences degree in Legal Studies.
from NYC Technical College. Upon graduation, Ms. Fradman worked as a legal
assistant in the Office of Goldberg Sager and Associates, providing support to two
partners, working in matrimonial, trust and estates, and bankruptcy law. While working,
she continued her studies and earned not only a Bachelors in Science degree in Legal
Studies, but distinguished herself attaining: Phi Theta Kappa and Tau Phi Sigma
National Honors Societies, Deans List of Scholars from NYC Technical College in 1998.
During her studies, she received The Brooklyn Bar Association Volunteer Layers
Project’s Certificate of Appreciation, Alumni Achievement Award and West Legal
Studies Award for Outstanding Scholastic Achievement. Upon graduation Ms. Fradman
worked as a real estate paralegal at Fried Frank LLP. She also holds a Master in
Business Administration from University of Phoenix and Bachelors in Science degree in
Engineering from Polytechnic University, Odessa, Ukraine.

For the past fourteen years, Ms. Fradman has worked in transactional real estate law,
representing commercial clients with the financing, acquisition, development, disposition
and leasing of various properties including office, retail, industrial, and multi-family
residential real estate both locally and nationwide.

In addition to serving as President of the New York City Paralegal Association, Inc., Ms.
Fradman is the Mentor Program Chairperson for the Association and Member of the
Advisory Board of the Institute of Paralegal Studies, SCPS, NYU.Member of the
Advisory Board of the Institute of Paralegal Studies, SCPS, New York University.

-1
-
WHY? WHERE? WHAT? - UNDERSTANDING
UCCs

Outline

1. Why?

• ​The Term
• ​Why to create a lien?
• ​Why would you want to “perfect” the security interest?
• ​Why not?

2. Where?

• ​Where do you file if the debtor is an entity?

• ​What happened if the debtor is an individual?
• ​Why the office of filing is so important?

3. What?

• ​What are the types of financial statements?

• ​What are the requirements?
• ​For how long is the financial statement effective?
• ​Collateral

4. Step by Step Guide

 • ​UCC-1
• ​UCC-1 Ad
• ​UCC-1 AP
​ CC-3
• U
• U​ CC-3 Ad
• ​UCC-3 AP
• ​UCC1 Cad

5. Sources 6.
Sample Forms

-2
-

WHY? ​⇒ ​The ​term UCC is short for Uniform Commercial Code. The Uniform

Commercial Code
​ (UCC) financing statements record and protect a secured party's
interest in the collateral offered by a debtor for a loan. The UCC system gives public
notice of the debtor-secured party relationship and the collateral involved. ​⇒ ​U​nder the
provisions of state Uniform Commercial Code statutes, when ​personal
property ​(equipment, inventory, and other tangible assets of a business) are used as
collateral for borrowing, a UCC-1 statement is prepared, signed, and filed. This
process is also called "perfecting the security interest" in the property, and this type
of loan is a ​secured loan. ​⇒ ​The filing creates a ​lien ​against the property, so the
borrower may not dispose of
the property without paying off the debt ​or ​to acquire another debt without
 notifying first and send lender about his intentions. ​⇒ ​In the U.S. the term
"security interest" is often used interchangeably with "​lien​".
However, the term "lien" is more often associated with the collateral of real
property than with of personal property. ​⇒ ​A security interest is typically
granted by a "security agreement". The security
interest is established with respect to the property, if the debtor has an ownership
interest in the property and the holder of the security interest conferred value to the
debtor, such as giving a loan. ​⇒ ​The holder may "perfect" the security interest to
put third parties on notice
thereof. Perfection is typically achieved by filing a financing statement with
government, often the secretary of state located at a jurisdiction where a corporate
debtor is incorporated. Perfection can also be obtained by possession of the
collateral, if the collateral is tangible property. ​⇒ ​Absent perfection, the holder of
the security interest may have difficulty enforcing
his rights in the collateral vis-à-vis third parties, including a trustee in bankruptcy
and other creditors who claim a security interest in the same collateral.

WHERE?

⇒ ​UCC documents filed with the Department of State are public records that
are
subject to disclosure under the Uniform Commercial Code. ​⇒ ​UCC documents
filed in the state of incorporation of the company; ​AND ​⇒ ​UCC documents filed on
the county level where the property is located (where a
mortgage would be recorded on the related real estate); ​OR ​⇒ ​If the debtor is an
individual, in the county where the individual reside. The record is
effective until the mortgage is released, satisfied or its effectiveness otherwise
terminates. ​⇒ ​The Office of Uniform Commercial Code Bureau files and
maintains records on
financial obligations (including IRS liens) incurred by individuals (in business as a
sole proprietor), business entities and corporations. This information is important to
any business or financial institution contemplating entering into a lien transaction as

-3
-
the secured party (the party providing funds or financing collateral). Knowing the
current financial status of the debtor party (the potential borrower) before extending
credit is crucial, and it is the number of active, existing liens already in effect for that
particular debtor party that most interests the potential secured party. As a prerequisite
for entering into a lien relationship, many secured parties first research a debtor name
to ascertain their credit worthiness and then demand a lien filing in regard to the actual,
current transaction. Secured parties routinely include banks, commercial businesses
(appliances, autos, boats), and sole proprietors. ​⇒ ​Non-Uniform County UCC Filing
➢ Arkansas ➢
Georgia ➢
Louisiana ➢
Minnesota ➢
New York ➢
North Dakota ➢
Oklahoma

WHAT?

⇒ ​Original Financing Statement (UCC1) ​For New York State, Section 9-501 governs
place of filing. Subsection (a) (1) provides that the office in which to file a financing
statement to perfect the security interest or agricultural lien is the office designated for
the filing or recording of a record of a mortgage on the related real property (This is the
office of the county clerk or ​New York City Register​.) if (1) the collateral is as-extracted
collateral or timber to be cut or (2) the financing statement is filed as a fixture filing and
the collateral is goods that are or are to become fixtures or (3) the collateral is a
cooperative interest. Subsection (a) (2) provides that the office in which to file a
financing statement to perfect a security interest is the office of the Secretary of State in
all other cases. Pursuant to subsection (b) a fixture filing for a transmitting utility would
also be filed with the Secretary of State.

⇒ ​Amendment, Assignment, Continuation, & Termination (UCC3) ​It is the

responsibility of the filer to determine which of the following may best meet the needs of
his or her individual situation. (1) In the case of an original financing statement that was
filed in the office of a county clerk (or the office of the ​New York City Register)​ that only
provided for collateral that would properly be filed in that office under Article 9, that
office is the proper place for filing an amendment, assignment, continuation, or
termination statement. (2) In the case of an original financing statement filed with the
Department of State that only provided for collateral that would properly be filed with the
Department of State under Article 9, the proper place for filing an amendment,
assignment, continuation, or termination statement is the Department of State. (3) In the
case of an original financing statement that was properly filed in both the office of a
county clerk (or the office of the ​New York City Register)​ and with the Department of
State that provided for collateral that would be filed with both offices under Article 9 (for
example, a fixture filing with other general collateral), the secured party should file an
amendment, assignment, continuation, or termination statement with both offices.

-4
-
⇒ ​National Correction Forms
UCC-5

The form is used to correct existing filing.

This form is available at ​http://www.dos.state.ny.us/forms/corporations/UCC5.pdf

⇒ ​Information Request Form

UCC-11

The form is available at ​http://www.dos.state.ny.us/forms/corporations/UCC11.pdf

⇒ ​Uniform Commercial Code Filing

Requirements

Legislation revising Article 9 of the Uniform Commercial Code was signed into law as
Chapter 84 of the Laws of 2001 and became effective July 1, 2001. Filers should be
aware that Article 9 requires financing statements and other UCC records to include
more information regarding the debtor than was previously required. For example:

is incumbent on the filer to ensure that the correct ​legal name ​of the debtor
• ​It
and the mailing address of the debtor are provided in the filing;
• ​The filing must indicate whether the debtor is an individual or an organization;
• ​If
the debtor is an individual, the filing must identify the debtor's last name; and
• ​If the debtor is an organization, the filing must provide both the debtor's type
of organization and jurisdiction of organization.

It should be stressed that under Article 9 a filing office may refuse to accept a record for
filing only for certain specified reasons. The fact that a record is accepted for filing does
not necessarily mean that the filing is effective for the purpose intended by the filer. The
filer is solely responsible for determining the proper office in which to file and for
determining that the record to be filed contains the information necessary to make the
record effective to accomplish the filer's purpose.

⇒ ​How long is the financing statement

effective?

The filing period of an initial financing statement is 5 years. If a continuation is not filed,
the initial financing statement will lapse 5 years from the original filing date. A
continuation extends the filing period 5 additional years from the original filing date. A
continuation may be filed up to 6 months prior to the lapse date of the initial financing
statement. There are four exceptions to the initial filing period of 5 years. They are:

Manufactured-Home Transaction - effective 30

years Public-Finance Transaction - effective 30
years Cooperative Filing - effective 50 years
Transmitting Utility - effective until terminated

⇒ ​Types of
Collateral

➢ Fixtures ➢
Timber to be cut

-5
-

o ​Trees ​▪ Real estate until

cut
▪ Once cut, timber becomes goods.
➢ Minerals to be extracted
o ​Oil, gas and other minerals
▪ Part of the real estate while in the ground
▪ Security interest cannot attach until extracted
▪ Becomes goods upon extraction
⇒ ​Understanding
Fixtures
➢ “Fixtures” defined
o ​Goods that have become so related to particular real estate that an
interest in them arises under real estate law. ➢
Three-part test:
o ​Actual annexation to the realty. ​o ​Appropriation to the use or purpose
of that part of the use or purpose of
that part of the realty which it is connected. ​o ​Intention of the party making
annexation to make the article a permanent
accession. ➢ Fixtures vs
Not Fixtures

Fixture Not Fixtures ​Grain bins Grain

bins Airplane hanger Airplane hanger
Theater chairs Large engine Irrigation
equipment Hog buildings Vacuum cleaner
hose Bathtub

The Court determines fixtures on a case-by-case basis!!!

 -6
-
STEP-BY-STEP
GUIDE

UCC-1 Financing Statement (Form UCC-1)

Item A is optional. Item B is required

by the filing office.
1. DEBTOR

⇒ ​Exact Name of Debtor Required for UCC Filings. ​. It is important to set

forth
the ​exact legal name of the debtor ​in any filings that are made. Financing
statements are indexed under the name of the debtor, and persons wishing to find
filed financing statements search for them under the debtor's name. ​⇒ ​Item 1a –
Organization’s Name. If the company was organized under the name of “ABC
Manufacturing Corp.”, Item 1a should read “ABC Manufacturing Corp.” ​only​!
Some examples of common errors include providing the following in the "Debtor's
Name" section of the financing statement: a) ABC Manufacturing Corp. d/b/a
Albany Tools b) ABC Manufacturing Corp. (a New York Corporation) c) ABC
Manufacturing d) ABC Mfg. Corp. e) ABC Manufacturing Corp. a division of XYZ
Enterprises, Inc. f) ABC Manufacturing Corp. a/k/a John J. Smith g) John J. Smith
d/b/a ABC Manufacturing Corp. ​⇒ ​Item 1b – Name of Individual. The name set
forth should be the correct name
and ​only ​the correct name. You should ​not ​include titles or other similar

-7
 -
designations. For example, if the name of the debtor is John J. Smith, the name
should be set forth in the "Debtor's Name" section of a financing statement (​e.g.,​
in item "1b" of the Financing Statement Form UCC1) exactly as John J. Smith
and ​only ​John J. Smith.
Some ​common errors ​when setting forth the individual's name in the "Debtor's
Name" section of the financing statement include the addition of titles, trade names
and also-known-as designations, and the addition of descriptive or extraneous
information. Some examples of common errors include providing the following in the
"Debtor's Name" section of the financing statement: a) Mr. John J. Smith b) John
Smith c) John J. Smith, Esq. d) John J. Smith, M.D. e) John J. Smith, C.P.A. f) John
J. Smith (debtor in possession) g) John J. Smith d/b/a ABC Manufacturing Corp. h)
John J. Smith a/k/a Jon J. Smith ​⇒ ​Item 1c – Mailing Address (for the organization
or individual) – ALWAYS required ​⇒ ​Item 1d is reserved for Financing Statements
to be filed in ND or SD only (Social
Security or FEIN #) ​⇒ ​Item 1e-g is applicable for organizations only (corp.,
limited liability company,
limited partnership, state of organization and organizational ID#). For example,
NYS – check “none”

2. Additional DEBTOR

⇒ ​If there is more than one Debtor, use Item 2 “Additional Debtor”. All of the above is applicable to
the additional Debtor.
 -8
-
3. Secured Party (Lender)

⇒ ​Item 3a – include the name of the Lender if institution or organization or Item

3b – if an individual ​⇒ ​Item 3c – always include mailing address of the secured
party. ​⇒ ​If more than one Secured Party, use Addendum (Form UCC1 Ad or
UCC1 AP). ​⇒ ​If there is an assignment of the Secured Party’s interest prior to
filing of the original UCC-1, you may need to add UCC1 Ad and giving secured
party’s name and address in Item 12 (see below).

4. Collateral
 ⇒ ​Use item 4 to indicate the collateral covered by this Financial Statement. ​⇒ ​For
examples of collateral description, please see below. ​⇒ ​If space in item 4 is
insufficient, the entire collateral description or continuation of the collateral
description may be put on either Addendum (Form UCC1Ad) or other attached
additional page(s).

Example 1.

Example 2.

-9
-
5. Alternative Designation

⇒ ​Check applicable box if

needed.

6. Fixture Filing
 ⇒ ​CHECK the box 6 if the Financial Statement is filed as a fixture filing. THIS IS
DONE ONLY ON A COUNTY’S LEVEL if the document will be filed in Real Estate
Records.

8. Optional Filer Reference Data

⇒ ​Usually, place of filing (State or County). For example, Secretary of State of

the State of Delaware; New York County, New York State). ​⇒ ​For Freddie Mac
ONLY: in the right corner, write the name of the property and Freddie Mac’s Loan
Number (FHLMC#______).

- 10
 -
Addendum to UCC-1 (UCC1 Ad)

9. Name of First Debtor

⇒ ​Copy item 1a or 1b from UCC-1 Financing Statement (see Page

5).

11. Additional
Debtor

⇒ ​Use this space if you need to add additional Debtor. All rules from item 1
apply
(see Page 5).

12. Additional Secured

Party
 ⇒ ​Use this space if you need to add additional Secured Party. All rules from item
3
apply (see Page 7).

NOTE: Because of the nature of the business, Freddie Mac and Fannie Mae’s
Assignments are filed simultaneously with the original filings. In this case, UCC1 and
UCC1Ad are prepared with Freddie Mac and Fannie Mae as Secured Party listed in
item 3 on UCC1 and Assignor (Wachovia, CBRE, etc.) as a second Secured Party listed
in item 12 on UCC1Ad. At this situation, a box next to the item 12 is checked out.

- 11
-
13. If this Financial Statement is filed as a fixture filing, check the appropriate box in
item
13. 14. Description of real estate should be provided in item 14. The
description should
provide but not be limited to mailing address of the property, Block and Lot
information. 15. Name and address of a Record Owner. 16. Item 16 is used to
continue to provide collateral description (as Item 4, see Page 7) 17. If Debtor is a
trust or a trustee acting with respect to Property held in trust or is a
decedent’s estate, appropriate box should be checked under item 17. 18. Item 18 is
used if Debtor is a transmitting utility or if the Financing Statement relates
to a Manufactured-Home Transaction or a Public-Finance Transaction only.
 - 12
-
Additional Debtor/Secured Party form (UCC1 AP)

This form is used if additional Debtor or Secured Party names are needed to be added
when filing a UCC Financing Statement (Form UCC-1)
19. Name of First Debtor (as shown in items 1a or 1b) on related Financing Statement
(see Page 5). 20. Leave it blank, unless instructed. 21-23. Add Additional Debtor’s
information as for item 1a or 1b, item 1e-g and item 1d (if the document will be filed in
ND or SD) (see Page 5 for more information). 24-25. Add Additional Secured Party’s
information as for items 3a-c (see Page 7 for more information).
 - 13
-
UCC FINANCING STATEMENT AMENDMENT (FORM UCC3)

Item A is optional. Item B is required

by the filing office.
1a. ​File Number​: Enter file number of initial financing statement to which this
Amendment relates. Enter ONLY ONE file number. In some states, in additional to the
file number, a date of the initial financing statement is required.

1b. Check this box ONLY if the document will be filed in Real Estate records.

2-3-4-5-6-7 or 8 These items show purpose of the filing.

⇒ ​Check the box at item 2 if this is a termination. ​⇒ ​Check the box at item 3 if
this is a continuation. ​⇒ ​Check the box at item 4 if this is an assignment. You will
need to complete item
7a (for organization) or 7b (for individual), and item 7c (address of assignee). Also
enter name f assigner in item 9. if partial Assignment affects only some (but not all)
of the collateral covered by the identified financing statement, check appropriate
box in item 8 and indicate affected collateral in item 8. ​⇒ ​Check the box at item 5
of this is an amendment (change of the name of a party, change the address of a
party, change the name and address of a party). Check only one box corresponding
whom this amendment will be affecting (Debtor or Secured Party). Also, check one
box that shows that amendment is requested (change of name or deletion of the
name from the record or addition of the name to the record). You will need to
provide additional information in items 6 and 7.
 - 14
-
6. Current Record Information
⇒ ​Name of record owner (organization or
individual)

7. Changed (New) or Added Information

⇒ ​Use 7a for organization or 7b for individual if you need to add new or
additional
party. ​⇒ ​Complete 7e-g if 7a was completed. ​⇒ ​Item 7d is reserved for Financing
Statement Amendments to be filed in ND or SD
only. ​⇒ ​If you have more than one additional Debtors or Secured Parties to add,
attach
Amendment Additional Party (Form UCC3AP).

8. Collateral Change
 ⇒ ​Used to describe change in the collateral covered by the identified
financing
statement. If the space in item 8 is insufficient, use item 13 of Amendment
Addendum (Form UCC3Ad). A partial release of collateral is a deletion. ​⇒ ​If a
partial assignment consists of the assignment of some (but not all) of the
collateral covered by the identified financing statement, indicate the assigned
collateral in item 8, check the appropriate box in item 8.

NOTE: If you need a full release of collateral, check box 2 (Termination) and not
box 8 (Collateral Change).

- 15
-
9. Name of Secured Party of Record Authorizing This Amendment.

⇒ ​ALWAYS enter name of party of record authorizing this Amendment; if more

than one authorizing Secured Party, give additional name(s), properly formatted, in
item 13 of Amendment Addendum (Form UCC3Ad). ​⇒ ​If this is an Amendment
authorized by a Debtor that adds collateral or adds a
Debtor, or if this is a Termination authorized by a Debtor, check the box in item 9
and enter the name, properly formatted, of the Debtor authorizing this
Amendment, and if this Amendment or Termination is to be filed or recorded in
 the real estate records, also enter, in item 13 of Amendment Addendum, name of
Secured Party of record.

10. Optional Filer Reference Data

⇒ ​Usually, place of filing (State or County). For example, Secretary of State of

the State of Delaware; New York County, New York State). ​⇒ ​In the right corner,
write Freddie Mac’s Loan Number (FHLMC#______).

- 16
-
UCC Financing Statement Amendment Addendum (Form UCC3Ad)
11. Enter information exactly as given in item 1a on Amendment form (see Page
12). 12. Enter information exactly as give in item 9 on Amendment form (see Page
12). 13. If space on Amendment form is insufficient or you much provide additional
information, enter additional information in item 13.
 - 17
-
UCC Financing Statement Amendment Additional Party (Form UCC3AP)

Use this form to continue adding additional Debtor or Secured Party names as needed
when filing a UCC Financing Statement Amendment (Form UCC3).
14. Enter file number of Financing Statement as shown on the Amendment to which
this Amendment Additional Party relates, exactly as shown in item 1 of Amendment
(see Page 12). 15. Enter information exactly as shown in item 9 of Amendment (see
Page 12). 16. Miscellaneous: use only if required, otherwise, leave blank.

17-19. If this Amendment Additional Party adds additional Debtors, complete items
17, 18 and 19 in accordance with the above instructions (see Page 5 and give
completer information for each additional Debtor. Be sure to completer either the
organization’s name or individual’s name items.
 - 18
-

20-21. If this Amendment Additional Party adds additional Secured Parties,

complete items 20 and 21 in accordance with the above instructions (see Page 7)
and give complete information for each additional Secured Party.
 - 19
-
UCC Financing Statement Cooperative Addendum (Form UCC1Cad)

Item A is optional. Item B is required

by the filing office.
19. If this form is being submitted with a UCC Financing Statement (Form UCC1),
check the box in item 19a. Otherwise, completer item 19b with the file number assigned
by the filing office to the UCC Financing Statement (UCC1) to which this form relates.

20-21. If item 19a was checked out, completer items 20a or 20b exactly as item 1 is
completed on the accompanying UCC Financing Statement (UCC1) and 21a or 21b
exactly as item 3 is completed on the accompanying UCC Financing Statement
(UCC1).
 - 20
-
22. Indicate whether the collateral includes only one or more than one
cooperative
interest. 23. Regardless of whether the collateral includes only one cooperative
interest or more
than one, indicate all uses that apply. If the “other” box is checked, item 23a must be
completed.

24. Cooperative Unit Real Property Filing

Data
 ⇒ ​24a – A separate form must be sued for each address number and street.
For
the building in which the cooperative unit(s) is/are located, show only the first line of
the mailing address (for example, “123 Main Street”, not “123 Main Street, New
York, New York). ​⇒ ​24b – In New York City, show the community the same way
that mail is usually
addressed (for example, “Brooklyn” or “Long Island City”). ​⇒ ​24c-24g – these
items must be completed in accordance with the requirements
of the filing office where the filing is to be done (for example, if filed in New York
City, 24c will be New York, 24d will be left blank, etc.) ​⇒ ​24h – Show the unit
number as stated in the proprietary lease, occupancy
agreement (for example, “Apartments 4E and 5E” or “Second Floor” or “Garage
Space G-64”).

25. Name of the Cooperative Organization.

- 21
-
26. Check the box in item 26 only if all the secured parties of record are agreeing to
subordinate their security interest to another security interest in the cooperative
interest(s). If the box is checked, item 26a must be completed.
27. Check item 27 only if the security agreement provides for future advances.
28. Miscellaneous. Completion of this item is optional. This space may be used
to supply any further information that you deem pertinent.
 - 22
-
Sources:

1. Understanding County UCC Records. Power Point Presentation by Paul

Hodnefield, Esq. Corporation Service Company. 2009 2. New York State
Senate’s Website ​http://public.leginfo.state.ny.us ​3. New York State
Department of State, Division of Corporations Website
http://www.dos.state.ny.us/corp/uccforms.html ​4. New York City Department of
Finance. Office of the City Register ​http://a836-
acris.nyc.gov/Scripts/CoverPage.dll/index ​5. Uniform
Commercial Code. Consolidated Laws (online)
http://public.leginfo.state.ny.us/menugetf.cgi?COMMONQUERY=LAWS ​6.
Uniform Commercial Forms and Fees
http://www.dos.state.ny.us/corps/uccforms.htm
l
 - 23
-
SAMPLE
FORMS
- 24
-