MF-7800D Series

Semi-dry-head, Cylinder-bed, Top and Bottom Coverstitch Machine

D R Y- H E A D
TECHNOLOGY
The advanced dry-head technology
prevents oil stains.

MF-7823D-U10-B56

A world-
first
feature Semi-dry-head, Top and Bottom Coverstitch Machine

MF-7800D
Series
Semi-dry-head, Cylinder-bed, Top and Bottom Coverstitch Machine

MF-7800D Series
JUKI's dry-head technology protects
sewing products from being stained with oil.
The world's first semi-dry-head top and bottom coverstitch machine has been developed.
With the excellent functions inherited from the MF-7800 Series, the MF-7800D is
provided with a dry frame mechanism to eliminate the cause of oil stains.
Stain removing work or re-sewing work is substantially reduced by
protecting sewing products from being stained with oil,
thereby improving the quality of finished products.

MF-7800D Series
Semi-dry-head, Cylinder-bed, Top and Bottom Coverstitch Machine

MF-7800D/UT Series
Semi-dry-head, Cylinder-bed, Top and Bottom Coverstitch Machine
with Top and Bottom Thread Trimming Device

MF-7823D-U10-B56-UT25

It is possible to select (change over) the stitch type according to sewing items.

Soft-seam Well-tensed seam

T h e s e a m c o n d i ti o ns c a n b e c h a n g e d ove r
according to the application or material, i.e., soft
a n d l o w-te n s e d s e a m s f o r i n n e r w e a r a n d
high-grade well-tensed seams for outer wear.

Neither the replacement of parts nor the

changing of thread tension is required.
The stitch type can be changed over
(soft-seams/well-tensed seams) simply by
changing the thread path.

By reducing the thread tension, beautifully-finished

seams and satisfactorily-finished body-fitting
products are produced. In addition, the machine
h a s a c h i e v e d l o w-v i b r a t i o n a n d l o w- n o i s e
operation, laying importance on comfort of sewing
and ease of handling.
 The frame no longer requires oiling.
Unlike the conventional models, the oiling mechanism inside
the frame has been eliminated. As a result, oil does not leak
from the needle bar, presser bar or spreader shaft.

Dry-head technology has materialized

a frame which does not need oiling.
The needle bar mechanism and spreader mechanism have
been applied with a special surface treatment.
JUKI's unique special grease is used for lubrication.
Grease-filled bearings have been adopted for the crank rod.
T h e s e a l l o w t h e m a c h i n e' s f r a m e m e c h a n i s m t o
demonstrate outstanding durability without being oiled.

Environmental consciousness
Since oil stains on sewing products are reduced, the
quantity of the use of stain remover generally used in sewing
plants can be reduced.

Dichlorofluoroethane (HCFC-141), which is generally used in oil stain cleaning

fluid, is included in those chemicals which need to be reduced, as it is a
substances that can harm the ozone layer.

Simplified maintenance mechanism

The machine comes with diverse and trouble-free functions in consideration of the shop-floor.
MF-7800 and commercially-available gauge Differential-feed micro-adjustment mechanism
components are applicable with no additional work. It is possible to finely adjust the differential feed amount to a
As a result of the commonality of components, best-suited value for the material to be used. In addition, the
commercially-available components (presser foot, throat plate differential feed ratio remains the same even when the stitch
length is changed.
and needle clamp) are now applicable and easily obtainable.

Micro-lifter mechanism
Expand
Elastic material or delicate
material can be sewn with the
Contract
p r e s s e r f o o t ke p t s l i g h t l y
raised.
This effectively helps reduce Mainfeed
Main feed Differential
Differential feed
feed
the degree of slippage,
warpage and damage of the
Comfortable work space
material.
The cylinder bed is designed to provide a comfortable work
space, to secure not only a longer distance from machine arm
to needle for covering process so as to help reduce
the operator's mental pressure, but also an optimum cylinder
length for hemming processes so as to ensure improved
operability.
MF-7800D series

U10 Universal type

(basic type)

The machine can be used for the hemming process of the

T-shirts Polo shirts

sleeves and bottoms of T-shirts and for the covering process

for sportswear and knitwear.
It is not a specific-purpose model, but a basic one which can
be used for a broader range of processes independently.
*Modification to the covering type and collarette attaching type model are
easily achieved simply by changing the throat plate and feed dog.

K10 for Covering

This model is best suited to covering processes for polo

Knitwear Sportswear

shirts, sportswear and knitwear.

C10 for Collarette attaching

This model is best suited for attaching collarettes on

T-shirts Briefs

underwear, T- shirts and briefs .

Multilayered joining parts of T-shirts can be fed smoothly
due to the adoption of a special-purpose gauge.

H21 for Hemming

(with left hand fabric trimmer)

This model is best suited to hemming processes

T-shirts Polo shirts

for sleeves and the bottoms of T-shirts, Polo

shirts, etc. It comes with a left hand fabric
trimmer for trimming fabric in parallel, at all times,
to the seam with consistency. The upper knife
stroke can be adjusted with ease.
* The knife drive section is a unit-structure to permit easy
removal. The machine is therefore used as a hemming type
model without a trimming capability.

E10 for Elastic band attaching

(with right hand fabric trimmer and tension roller)

This model is best suited to endless flat elastic

Briefs Boxer briefs

band sewing processes for briefs, boxer briefs,

etc. The right hand fabric trimmer trims the fabric,
even at a multi-layered joined part, to produce a
beautiful finish with the seam and fabric edge
aligned with consistency. The right hand fabric
trimmer mechanism is a unit-structure to permit
easy installation/removal. This contributes to
easier adjustments, such as looper aligning.
 List of subclass machines

Application Seam Model No.

Number Number Needle Stitch Presser foot Max. sewing
of of gauge Differentialfeed lifting amount *3 speed
length *1 ratio *2
needles threads (mm) (mm) (mm) (sti/min)

MF-7823D-U10-B**
MF-7823D-U10-D**
U10 MF-7823D-U10-B**/UT22 1:0.9~1:1.8
3 5 5.6, 6.4 0.9~3.6 5(8) 4,000
Universal type MF-7823D-U10-D**/UT22 (1:0.6~1:1.1)
( basictype )
MF-7823D-U10-B**/UT25
MF-7823D-U10-D**/UT25

MF-7823D-K10-B56
K10 3 5 5.6 0.9~3.6
1:0.9~1:1.8
5(8) 4,000
(1:0.6~1:1.1)
Covering MF-7823D-K10-B56/UT25

C10 1:0.9~1:1.8
MF-7823D-C10-B56 3 5 5.6 0.9~3.6 5(8) 4,000
Collarette (1:0.6~1:1.1)
attaching

MF-7823D-H21-B56
MF-7823D-H21-B56/MC36 5.6
H21 MF-7823D-H21-B56/UT22
1:0.9~1:1.8
Hemming MF-7823D-H21-B**/UT25 3 5 5.6, 6.4 0.9~3.6 5(8) 4,000
(1:0.6~1:1.1)
with left hand
( fabric trimmer ) MF-7823D-H21-D56/UT25 5.6
MF-7823D-H21-B**/UT25/MC35 4.8, 5.6, 6.4
MF-7823D-H21-D56/UT25/MC35 5.6

E10 MF-7823D-E10-B40 3 5 4.0

1:0.9~1:1.8
Elastic band attaching 0.9~3.6 5(7) 4,000
with right hand (1:0.6~1:1.1)
( fabric trimmer ) MF-7813D-E10-B56/PL11/UT24/MC35 3 4 5.6

*1 Stitch length can be adjusted to 4.5mm at the maximum.

*2 Differential ratio can be switched by adjustment.
*3 The numeric value indicates the lifting amount of the presser foot for top and bottom coverstitch.
The numeric value given in parentheses indicates the lifting amount of the presser foot for bottom coverstitch.
*4 "sti/min" stands for "Stitches per Minute."

List of gauges

Type C10 K10 C10

Needle gauge 3.2mm 4.0mm 4.8mm 5.6mm 6.4mm 5.6mm 6.4mm 4.0mm 5.6mm 6.4mm

Needle clamp 13350004 13350103 13350509 13350301 13350400 13350301 13350400 13350103 13350301 13350400
Throat plate B 40058587 40058706 40040514 40040515 40040513 13352307 13352406 13351408 13351606 13351705
tongue shape of
( throat plate* ) D - 40058956 40060923 40040516 40061463 - - 40073948 40073950 -

Presser foot asm. 40058589 40058708 13376058 13375050 13375050 13375050 40056504 40056410 40056411

Main feed dog 13431200 13430103 13430707 40056684 13430301

Differential-feed dog 13433503 13432109 13432901 40056683 40056416

*For the shape of the throat plate, B type is standard. The D type throat plate allows the needle thread to stretch moderately.

Type H21 E10

Needle gauge 4.0mm 4.8mm 5.6mm 6.4mm 4.0mm 5.6mm 6.4mm

Needle clamp 13350103 13350509 13350301 13350400 13550103 13350301 13350400

Throat plate B 40058639 13445101 40041203 40041204 13356001 13356209 13356308
tongue shape of
( throat plate ) D 40035066 - 40049944 - - - -

Presser foot asm. 40048637 40039796 40039794 40022100 40022101

Main feed dog 13431200 40032900 13430806 13430905

Differential-feed dog 13433503 40040376 13433107 13433206

Upper knife 40039364 40038754

Lower knife 40042378 40038091

 Device

UT22 Electromagnetic type top and bottom thread

trimming device/Auto-lifter UT24 Pneumatic type bottom thread trimming device +
Air blow type wiper / Auto-lifter

It is an electromagnetic type automatic This is a pneumatic type bottom thread trimming device / auto-lifter. Air blow
thread trimming device/auto-lifter. type wiper pneumatically handles the needle thread (i.e. places the needle
The machine does not need an air thread above the presser foot) instead of the mechanical wiper.
compressor to achieve easy layout 1
changing.
1

Air blow type wiper

Electromagnetic type top and bottom Presser lifter drive mechanism
thread trimming mechanism Thread trimmer drive mechanism
■Compressed air / Air consumption

UT25 Pneumatic type top and bottom thread trimming

device/Auto-lifter
(with automatic thread trimmer)
UT24
Air consumption Compressed air
Bottom thread trimmer / Air-blow type MC35
It is a pneumatic automatic thread dm3/min (ANR) MPa
trimming device/auto-lifter. Auto-lifter wiper MC36
Since the automatic lift of the presser
○ ○ 182
foot and automatic thread trimming can 0.5
be activated by lightly depressing the ○ ○ ○ 637
1
pedal, work efficiency is dramatically
increased.
(with automatic thread trimmer)
UT25
Air consumption Compressed air
Top and bottom thread Air-blow type MC35 dm3/min (ANR) MPa
trimmer / Auto-lifter wiper MC36

○ 0.7

○ ○ 182
0.5
○ ○ 456
2
○ ○ ○ 637

Pneumatic type top and bottom Presser lifter drive mechanism

thread trimming mechanism Thread trimmer drive mechanism

MC35・36 Pneumatic cloth chip suction device PL11 Cloth puller : Flat type

Cloth chips trimmed by the hook This is a flat type cloth puller. It helps feed soft material which requires a higher
knife are sucked away using air. feeding force to assist sewing. (Example: Hemming)
So, there is no risk of sewing cloth
chips in seams.
MC35 (solenoid valve type) for the
servomotor or MC36 (mechanical
valve type) for the clutch motor
should be selected according to
the use of your machine.

MC35

MC36
 WHEN YOU PLACE ORDERS
Please note when placing orders, that the model name should be written as follows:

[without automatic thread trimmer]

Stitch type Code Tonque shape of throat plate Code

2-needle, top and bottom coverstitch 22 B type (standard) B

*D : This gives a moderate slack to
3-needle, top and bottom coverstitch 23 D type D the needle thread as compared with the
standard type "B".

Application Code Needle gauge Code Device and attachment Code

Universal U10 3.2mm 32 Not provided

Covering K10 4.0mm 40 Pneumatic cloth chip suction device

MC36
Hemming (with left hand fabric trimmer) H21 4.8mm 48 (mechanical valve type)  

Elastic band attaching (with right hand fabric trimmer) E10 5.6mm 56

Collarette attaching C10 6.4mm 64

*For stitch type category "23" (3-needle),
needle gauge category "32",
"40" and "48" cannot be selected.

[with automatic thread trimmer]

Stitch type Code Tonque shape of throat plate Code Needle gauge Code

3-needle, bottom coverstitch 13 B type (standard) B 4.0mm 40

2-needle, top and bottom covering stitch 22 D type D 4.8mm 48

3-needle, top and bottom covering stitch 23 5.6mm 56

*For stitch type category "23" (3-needle),
6.4mm 64 needle gauge category "40" and "48"
cannot be selected.

Application Code Device and attachment Code

Universal U10 Not provided

Covering K10 Pneumatic cloth chip suction device (solenoid valve type) MC35

Hemming (with left hand fabric trimmer) H21 Cloth puller: Flat type PL11

Elastic band attaching (with right hand fabric trimmer) E10

Thread trimming device Code

Electromagnetic type top and bottom thread trimming device UT22

Pneumatic type bottom thread trimming device +

UT24
Air blow type wiper

Pneumatic type top and bottom thread trimming device UT25

• To order, please contact your nearest JUKI distributor.

 ■SPECIFICATIONS(U10, K10, H21, E10, C10)
Model name MF-7800D Series
Stitch type 2-needle / 3-needle top and bottom covering stitch

Needle UY128GAS #9S∼#12S (standard #10S)

5mm (with top and bottom covering stitch),

U10, K10, H21, C10
8ｍｍ (with bottom covering stitch)
Lift of the presser foot
5mm (with top and bottom covering stitch),
E10 7ｍｍ (with bottom covering stitch)

Stitch pitch adjustment By dial

Differential feed adjustment By micro-adjustment mechanism

Lubrication Automatiac

Lubricating oil JUKI Machine Oil 18 (equivalent to ISO VG18)

Feed dog inclination adjustment Provided as standard

Micro-lifter Provided as standard

Needle bar stroke converting function 31mm

Silicon oil tank for needle tip and needle thread Provided as standard

Cartridge oil filter Provided as standard

U10, K10, 10 42kg (without device), 44kg (with UT25), 48kg (with UT22)

Weight of the machine head H21 43kg (without device), 45kg (with UT25), 49kg (with UT22)

E10 43kg (without device), 48kg (with PL11), 50kg (with UT24/PL11)

2-11-1, TSURUMAKI, TAMA-SHI,

TOKYO 206-8551, JAPAN
PHONE : (81) 42-357-2254
FAX : (81) 42-357-2274
INDUSTRIAL SEWING MACHINE DIV. http://www.juki.com
✽ Specifications and appearance are subject to change without prior notice for improvement.
✽ Read the instruction manual before putting the machine into service to ensure safety.
✽ This catalogue prints with environment-friendly soyink on recycle paper.
AUGUST, 2010 Printed in Japan(C)