Scribd
Upload
64 views1 page

USB Upgrade Method PDF

The document provides instructions for updating the firmware of a device using a USB flash drive. It describes downloading the newest firmware file from a website, copying it to the USB flash drive after deleting any previous versions, inserting the USB drive into the device while it is on, selecting to update the software from the device menu which will automatically update and restart the device. It warns that unplugging power or a power outage during the upgrade process may cause permanent damage.

Uploaded by

Luis Alfonso Quevedo Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views1 page

USB Upgrade Method PDF

The document provides instructions for updating the firmware of a device using a USB flash drive. It describes downloading the newest firmware file from a website, copying it to the USB flash drive after deleting any previous versions, inserting the USB drive into the device while it is on, selecting to update the software from the device menu which will automatically update and restart the device. It warns that unplugging power or a power outage during the upgrade process may cause permanent damage.

Uploaded by

Luis Alfonso Quevedo Rodriguez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Upgrade Method by USB flash drive

How to prepare F/W Update file via USB flash drive


1. Download the newest firmware file onto your computer from www.samsung.com.
2. If the firmware file is compressed (*.zip), the file should be uncompressed
3. Connect a USB flash drive to your computer.
4. If there are previous versions of firmware in the folder on USB flash drive,
delete them.
5. Copy the new folder to USB flash drive.

Warning
The following events may interrupt the upgrade process and
MAY RESULT IN PERMANENT DAMAGE TO THE UNIT.
1. Unplugging the power cord.
2. Power Outage.

How to upgrade the BDP


1. Insert the USB flash drive into the BDP while it is ON.
2. In the product’s menu, go to Settings > Support > Software Update.
3. Select Update now.
The product searches for the software on the USB drive.
When it finds the software, the Update Request pop-up appears.
4. Select OK. The product upgrades the software, turns off, and then turns on
automatically.

You might also like