Scribd
Upload
85 views1 page

Standard Shock Pulse Transducers: Ordering Numbers

Uploaded by

riyadh bsiso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
85 views1 page

Standard Shock Pulse Transducers: Ordering Numbers

Uploaded by

riyadh bsiso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Standard Shock Pulse Transducers

A M8 /
UNC 5/16"

46.5 4 11 17

61.5

B
ø 11

46.5 58 11

115.5

Standard shock pulse transducers are used in all permanent


SPM installations for bearing monitoring. They are installed Mounting hole Space
in countersunk mounting holes on the bearing housings. min. 15 mm min. 100 mm

A shock pulse transducer converts the shock pulses emitted SPM 93022
by the bearing into electric signals. A coaxial cable connects
the transducer with a measuring terminal or measuring de-
vice. Max. cable length is 4 m.

Transducer housing and base are made of stainless acid proof


Space min. 75 mm
steel, suitable for aggressive environments. Standard thread
size is M8, with UNC 5/16" as an alternative. Standard length
(A) is 61.5 mm. A long transducer (B), length 115.5 mm, is
used to reach bearing housings beneath protective covers.

The transducer is normally connected with a TNC plug, SPM


93022. A TNC angle plug, SPM 93077, can be used in narrow SPM 93077
spaces. To prevent cable corrosion in moist environments, Max. 57 mm
the coaxial cable must be con-nected with a sealing TNC
plug, SPM 13008.

Ordering numbers
40000 Standard shock pulse transducer, M8 x1.25
40100 Standard shock pulse transducer, UNC 5/16-18
40001 Standard shock pulse transducer,
M8 x1.25, extended
40101 Standard shock pulse transducer, Mounting tools
UNC 5/16 - 18, extended 82053 Countersink with fixed pilot for M8
81027 Holder for countersink
Technical data 81028 Countersink, angle 90°, 12 mm dia.
Measuring range Max. 100 dBsv 81031 Pilot for M8
Housing, base Stainless acid proof steel, 81032 Pilot for UNC 5/16"
Sandvik Grade:1802, EN:1.4523
To drill the mounting hole, use drill bits 6.9 mm for M8, 6.6
Design Sealed
mm for UNC5/16".
Connector tightness IP65 with TNC connector
IP 67 with conn. SPM13008 Torque and unscrew the transducer with a torque wrench
Temperature range -30° C to +150° C and a long 17 mm socket (SPM 81086).
External overpressure Max. 1 MPa (10 bar)
Mounting torque 15 Nm, max. 20 Nm
Connector TNC jack
Weight: 55 g

SPM Instrument AB • Box 504 • SE-645 25 Strängnäs • Sweden Technical data are subject to change without notice.
Tel +46 152 22500 • [email protected] • www.spminstrument.com ISO 9001 certified. © Copyright SPM 2013-06. TD-004 B Rev.0

You might also like