PCD1 53

1.4 Saia PCD1

The Saia PCD1 systems are the smallest programmable Saia PCD® controllers in a flat design. Alongside the standard communication
interfaces, integrated data memory and web/IT functionality, all controllers also have at least 18 integrated I/Os. The PCD1
controllers are ideally suited to small-scale automation tasks, whose challenges and issues can be successfully mastered by the

Automation
powerful CPU.

stations
The many communication options are another advantage:
Ethernet TCP/IP, USB port, the onboard RS-485 interface and the expansion options with BACnet® or LON IP, for instance, are a small

1
example of the performance capability of PCD1.

1.4.1 Saia PCD1.M2 series

HMI Visualization
Page 54

and operating
Saia PCD1.M2xxx are compact
and may be modular extended.

` PCD1.M2160 with Ethernet TCP/IP and expanded memory

Types:

` PCD1.M2120 with Ethernet TCP/IP

2
` PCD1.M2020 without Ethernet TCP/IP

18 integrated I/Os
2 free I/O slots

Possible use in
primary switch cabinet

room controller
Dedicated
1.4.2 Saia PCD1.Room (PCD1. M2110R1) Page 58

Saia PCD1.Room is for applications in the field

3
of room automation and HeaVAC.

` PCD1.M2110R1 with Ethernet TCP/IP for

Type:

room automation applications

24 integrated I/O
1 free I/O slot

Possible use in a room Consumption data

(Example in a Room Box) acquisition

1.4.3 Saia PCD® E-Controller (PCD1.M0160E0) Page 62

4

E-Controller for installation in electrical cabinet.

In the default setup, there are S-Monitoring (energy)
functionalities that can be adjusted with Saia PG5.

` PCD1.M0160E0 with S-Monitoring function

Type:

18 integrated I/Os
no free I/O slots
components
Cabinet

Possible use in a
electrical cabinet
5

Automation stations – Saia PCD1 saia-pcd.com

54 PCD1
1.4.1 Saia PCD1.M2xxx

The Saia PCD1.M2xxx series is a compact controller with onboard I/Os and in addition two I/O-slots
for PCD2 I/O-modules or communication interface-modules. The Web/IT functionality, the onboard
memory, the range of standard communication interfaces and the expansion options offer good solu-
tions for small to medium installations.

Layout System characteristics

` Up to 50 inputs / outputs
2 free slots with SPI (fast serial bus) may be expanded locally with RIO PCD3.T66x or PCD3.T76x
` Up to 8 communication interfaces
for I/O or communication modules

` USB and Ethernet interface onboard

` Large onboard memory for programs (up to 1 MByte)
Power supply 24 VDC and data (up to 128 MByte file system)
` Automation Server for integration into Web/IT systems
Watchdog relay
RS-485 interface
IO0 IO1

Automation Server
SNMP
Slot for integrated in
M1 memory the base unit
X3 modules
Slot for communica- and com-
tion interfaces munica-
Slot A
tion
Battery
Operational LEDs
RUN/STOP button
USB port
X2 X1 X0
Ethernet connection
(2 port switch)
Types
` PCD1.M2160 with Ethernet TCP/IP
Terminals for integral
and expanded memory
` PCD1.M2120 with Ethernet TCP/IP
inputs and outputs
Terminals for optional
` PCD1.M2020 without Ethernet TCP/IP
connection (slot A)

Mounting Dimensions Power supply and connection plan

226

Supply

1.5mm2 / max. 25 cm

Earthing bar
142 49

On a flat surface On two top-hat rails Further information is provided in the Saia PCD3 power
(2 × 35 mm pursuant to supply and connection plan section and in Manual 26-875.
DIN EN 60 715 TH35)

saia-pcd.com Automation stations – Saia PCD1

 PCD1 55

Overview of Saia PCD1.M2xxx

Technical data

Automation
stations
Memory and file system Types: PCD1.M2160 PCD1.M2120 PCD1.M2020

1
Program memory, DB/text (Flash) 1 MByte 512 kByte 512 kByte

User memory, DB/text (RAM) 1 MByte 128 kByte 128 kByte

User flash file system onboard 128 MByte 8 MByte 8 MByte

Integrated communication
Ethernet connection (2 port switch)

HMI Visualization
yes yes no
10/100 Mbit/s, full-duplex, auto-sensing, auto-crossing

and operating
USB connection
USB 1.1 device, 12 Mbit/s
yes yes yes
RS-485
(terminal X3), up to 115 kbit/s
yes yes yes

General data

2
Supply voltage 24 VDC, –20/+25 % max. incl. 5% ripple (according to EN/IEC 61131-2)
Battery for data backup (exchangeable) Lithium battery with a service life of 1 to 3 years
Operating temperature 0…55 °C
Dimensions (W × H × D) 142 × 226 × 49 mm
Type of mounting 2× top-hat rails according to DIN EN60715 TH35 (2 × 35 mm) or on a flat surface
Protection level IP 20
Capacity 5V/+V(24 V) internal max. 500 mA/200 mA

room controller
Power consumption typically 12 W

Dedicated
On-Board inputs/outputs

Inputs
6 Digital inputs (4 + 2 interrupts) 15…30 VDC, 8 ms / 0.2 ms input filter Terminal X1

3
2 Analog inputs, selectable via DIP switch –10…+10 VDC, 0…+/–20 mA, Pt1000, Ni1000, Ni1000 L&S, 0…2.5 kΩ, Terminal X1
12 bit resolution

Outputs
4 Digital outputs 24 VDC / 0.5 A Terminal X0
1 PWM output 24 VDC / 0.2 A Terminal X0

selectable/configurable via PG5

Consumption data
4 Digital inputs or outputs 24 VDC / data as digital inputs resp. outputs Terminal X0
1 Watchdog relay or make contact 48 VAC or VDC, 1 A
Terminal X3 acquisition
mount a free wheeling diode over the load when switching DC-tension

Analogue output module Saia PCD7.W600 *)

This new analogue outputs (range 0 to +10 V) with 12 bits resolution has been especially developed for the new
4

PCD1 CPU (PCD1.M2xxx, PCD1.M0160E0, PCD1.M2110R1 ). It can be plugged in the slot A instead of a commu-
nication interface.
*) In preparation, see section C2 Product status

Plug-in I/O modules for slots I/O 0 and I/O 1

The modules that have already been listed in the PCD2.M5 series are used for the Saia PCD1 series.

I/O 0 I/O 1
components
Cabinet

Retaining catch Bus connector

5

Automation stations – Saia PCD1 saia-pcd.com

56 PCD1
Saia PCD1.M2xxx interface options
IO0 IO1

In addition to the onboard interfaces, the interface functions can also be extended in a modular way by
M1
means of the various slots. Numerous protocols are therefore supported by the Saia PCD1.M2 series. X3

Detailed information and an overview can be found in the section BA communication systems. Slot A

X2 X1 X0

Current draw
Current draw
on 5V bus on +V bus Slot
Communication (24V)
PCD7.F110S RS-485/RS-422 not electrically isolated 40 mA – Slot A
PCD7.F121S RS-232 with RTC/CTS, DTR/DSR, DCD suitable for modem, 15 mA
EIB connection
– Slot A

PCD7.F150S RS-485 electrically isolated,

130 mA – Slot A
with activatable termination resistors
PCD7.F180S Belimo MP-Bus, for connecting up to 8 drives on one line 15 mA 15 mA Slot A
PCD2.F2100 RS-422/RS-485 plus PCD7.F1xxS as option 110 mA – EA 0/1
PCD2.F2150 BACnet® MS/TP RS-485 plus PCD7.F1xxS as option 110 mA – EA 0/1
PCD2.F2210 RS-232 plus PCD7.F1xxS as option 90 mA – EA 0/1
PCD2.F2400* LONWORKS®-Interface-Modul 90 mA – EA 0/1
PCD2.F2610 DALI master for up to 64 DALI-devices 90 mA – EA 0/1
PCD2.F27x0 M-Bus master with 2 M-Bus interfaces 70 mA 8 mA EA 0/1
PCD2.F2810 Belimo MP-Bus plus PCD7.F1xxS as option 90 mA 15 mA EA 0/1

The use of external modem modules such as Q.M716-KS1 is recommended.

The PCD2.T8xx modem modules can only be used together with a PCD7.F121S module. External wiring is therefore required.

System properties of PCD2.F2xxx modules

The following points must be observed when using the PCD2.F2xxx interface modules:
` For each PCD1.M2 system, up to 2 PCD2.F2xxx modules (4 interfaces) can be used in slots I/O 0/1.
` To determine the maximum communication capacity for each PCD1.M2 system, consult the information and examples provided in
Manual 26/875 for PCD1.M2.

Memory modules

The onboard memory of the Saia PCD1.M2xxx can be extended by means of a Saia PCD7.Rxxx module in slot M1. In ad-
dition, the Saia PCD1.M21x0 can be extended with BACnet® IP or LON IP.
More information about the memory management and construction are listed in Chapter 1.1 Saia PCD® basic properties.

Memory extension and communication

PCD7.R550M04 Flash memory module with 4 MByte file system (for user program backup, web pages, etc.) M1
PCD7.R560 Flash memory module for BACnet® firmware M1
PCD7.R562 Flash memory module for BACnet® firmware with 128 MByte file system M1
PCD7.R55xM04
PCD7.R580 Flash memory module for LON IP firmware M1
PCD7.R582 Flash memory module for LON IP firmware with 128 MByte file system M1 PCD7.R610
PCD7.R610 * Base module for Micro SD Flash Card M1
PCD7.R-MSD1024 * Micro SD Flash Card 1024 MB, PCD formatted PCD7.R610
*) In preparation, see section C2 Product status

saia-pcd.com Automation stations – Saia PCD1

 PCD1 57

Accessories and consumables for Saia PCD1.M2xxx

Labeling
The self-adhesive labels can be printed directly with the
SBC LabelEditor from the PG5 Device Configurator

Automation
stations
1
EPLAN macros
For project planning and engineering ePLAN® electric P8 macros are available from the
EPLAN macros are available. support page.
Macros and product data may also be obtained
from the ePLAN® data portal.

HMI Visualization
and operating
Battery for data backup
Type Description

2
4 507 4817 0 Lithium battery for PCD processor unit (RENATA button battery type CR 2032)

Plug-in screw terminal blocks

4 405 5089 0 Plug-in screw terminal block, 11-pole, labeling 0…10 Terminal X0
4 405 5087 0 Plug-in screw terminal block, 9-pole, labeling 11…19 Terminal X1
4 405 5088 0 Plug-in screw terminal block, 10-pole, labeling 20…29 Terminal X2
4 405 4919 0 Plug-in screw terminal block, 10-pole, labeling 30…39 Terminal X3

room controller
Cover

Dedicated
4 104 7759 0 Housing cover for PCD1.M2xxx without logo
can be individually designed on site with a foil

3
Consumption data
Range of uses

` For small and medium installations with a minimum risk through the expandability and programmability
acquisition
` Modernization and enhancement of existing installations through the compact design, for example
` Various interface options, including to existing installations as a gateway.
For example, optimization of a cooling system by setting all the free parameters
4
components
Cabinet

Connection to an existing EIB/KNX installation Use as communication interface

providing conference rooms with a web connection with M-Bus in a district heating
network
5

Automation stations – Saia PCD1 saia-pcd.com

58 PCD1
1.4.2 Saia PCD1.Room (PCD1.M2110R1)

Saia PCD1.Room (PCD1.M2110R1) is a programmable room controller for sophisticated solutions with
many communication options. In addition to the I/Os that are already integrated, the controller offers a free I/O
slot for an individual expansion with inputs/outputs or communication options. Web/IT functions for mobile
operation, for instance, are also already onboard.
Furthermore, Saia PCD1.Room offers various possibilities for integrating other systems in the room through stand-
ard communication interfaces. (Energy) efficient and individual room automation can be easily implemented as a
result.
The controller also provides a good basis for achieving the energy efficiency classes according to EN 15232:2012.

Layout with connection example

Expansion option 2 × analog outputs: 4 × analog inputs:

I/O or communication module 0…10 VDC, 0(4)…20 mA 0…10 VDC, 0(4)…20 mA
e.g. DALI (PCD2.F2610) e.g. Pt500, Pt1000, Ni1000
– volume flow control e.g.
– adjust temperature setpoint – air quality measurement
– precipitation detection
1× serial communication
RS-485: e.g. connection of
external wireless receiver
EnOcean
1× make contact 48VAC
e.g. switching contact
Power supply 24 VDC

USB port
Ethernet connection
(2 port switch) e.g. to the Inter-
net (remote control via browser
is possible as a result)

1× optional terminals for

serial communication 2× analog inputs: 6× digital inputs: 4× digital inputs/ 5× digital outputs:
depending on the – 10…+10 VDC, 0…+/-20 mA, 15…30 VDC outputs (selectable) 24 VDC
e.g. 24 VDC e.g.
PCD7.F1xxS module Pt1000, Ni1000, Ni1000 L&S, e.g. – signal presence
e.g. 0…2.5 kΩ – presence detection
– window monitoring – dewpoint monitoring – switch/set binary output
– MP-Bus e.g. – time switch program
(with PCD7.F180S) – brightness measurement
for Belimo actuating – air temperature measurement
drives.

Lighting, sun blinds and single room control can be optimally harmonized with this controller. This example showing possible assignments was compiled on the
basis of applications according to the VDI 3813 list of room automation functions and the DIN EN 15232 list of building automation functions.

The Smart RIO Manager function is not supported!

Mounting Dimensions Power supply and connection plan

226

Supply

1.5mm2 / max. 25 cm

Earthing bar

On a flat surface On two top-hat rails 142 49

(2 × 35 mm pursuant to
Further information is provided in the Saia PCD3 power
DIN EN 60 715 TH35)
supply and connection plan section and in Manual 26-875.

saia-pcd.com Automation stations – Saia PCD1

 PCD1 59

Overview of Saia PCD1.Room (PCD1.M2110R1)

Technical data
Memory and file system Type: PCD1.M2110R1
Program memory, DB/text (Flash) 256 kByte

Automation
User memory, DB/text (Flash) 128 kByte

stations
User flash file system onboard 8 MByte

Integrated communication
Ethernet connection (2 port switch) 10/100 Mbit/s, full-duplex, auto-sensing, auto-crossing yes

1
USB connection USB 1.1 device, 12 Mbit/s yes
RS-485 (terminal X3), up to 115 kbit/s yes

General data
Supply voltage 24 VDC, –20/+25 % max. incl. 5% ripple (according to EN/IEC 61131-2)
Battery for data backup (exchangeable) Lithium battery with a service life of 1 to 3 years

HMI Visualization
Operating temperature 0…55 °C

and operating
Dimensions (W×H×D) 142 × 226 × 49 mm
Type of Mounting 2× top-hat rails according to DIN EN60715 TH35 (2 × 35 mm) or on a smooth surface
Protection type IP 20
Capacity 5V/+V(24V) internal max. 500 mA/200 mA
Power consumption typically 12 W

2
Automation Server Flash memory, Filesystem, FTP and Web-Server, E-Mail, SNMP

Automation Server
SNMP
integrated in
the base unit

On-Board inputs/outputs
Inputs
6 Digital inputs (4 + 2 interrupts) 15…30 VDC, 8 ms / 0.2 ms input filter Terminal X1

room controller
2 Analog inputs, selectable via DIP switch –10…+10 VDC, 0…+/–20 mA, Terminal X1
Pt1000, Ni1000, Ni1000 L&S, 0…2.5 kΩ, 12 Bit resolution

Dedicated
4 Analog inputs, selectable via DIP switch 0…10 VDC, 0(4)…20 mA, Pt1000, Pt 500, Ni1000
14 Bit resolution EA 1

Outputs

3
4 Digital outputs 24 VDC / 0.5 A Terminal X0
1 PWM output 24 VDC / 0.2 A Terminal X0
2 Analog outputs, selectable via PG5 0…10 VDC or 0(4)…20 mA, 12 Bit resolution EA 1

Selectable/configurable via PG5

4 Digital inputs or outputs 24 VDC / data as digital inputs resp. outputs Terminal X0
1 Watchdog relay or as make contact 48 VAC or VDC, 1 A Terminal X3
mount a free wheeling diode over the load when switching DC-tension

Consumption data
Analogue output module Saia PCD7.W600 *) acquisition
This new analogue outputs (range 0 to +10 V) with 12 bits resolution has been especially developed for the new
PCD1 CPU (PCD1.M2xxx, PCD1.M0160E0, PCD1.M2110R1 ). It can be plugged in the slot A instead of a commu-
nication interface.
*) In preparation, see section C2 Product status
4

Plug-in I/O modules for slot I/O 0

The modules that have already been listed in the PCD2.M5 series are used for the Saia PCD1 series.
I/O 0 I/O 1
components

Retaining catch Bus connector

Cabinet

Only a PCD2.W525 module that is already supplied together with the controller in the default set up works in slot I/O 1.
If the module is removed, the controller stops.
5

Automation stations – Saia PCD1 saia-pcd.com

60 PCD1
Saia PCD1.Room (PCD1.M2110R1) interface options
W
IO 0
Modul

In addition to the onboard interfaces, the interface functions can also be extended in a modular way by
M1
means of the various slots. Numerous protocols are therefore supported by the Saia PCD1.M2110R1. X3

A detailed list of all the protocols can be found in the section BA communication systems. Slot A

X2 X1 X0

Current draw on Current draw on Slot

Communication 5V bus +V bus (24V)
PCD7.F110S RS-485/RS-422 not electrically isolated 40 mA – Slot A
PCD7.F121S RS-232 with RTC/CTS, DTR/DSR, DCD suitable for
modem, 15 mA – Slot A
EIB connection
PCD7.F150S RS-485 electrically isolated, 130 mA – Slot A
with activatable termination resistors
PCD7.F180S Belimo MP-Bus, for connecting up to 8 drives on one line 15 mA 15 mA Slot A
PCD2.F2100 RS-422/RS-485 plus PCD7.F1xxS as option 110 mA – EA 0/1
PCD2.F2150 BACnet® MS/TP RS-485 plus PCD7.F1xxS as option 110 mA – EA 0/1
PCD2.F2210 RS-232 plus PCD7.F1xxS as option 90 mA – EA 0/1
PCD2.F2400* LONWORKS®-Interface-Modul 90 mA – EA 0/1
PCD2.F2610 DALI master for up to 64 DALI-devices 90 mA – EA 0/1
PCD2.F27x0 M-Bus master with 2 M-Bus interfaces 70 mA 8 mA EA 0/1
PCD2.F2810 Belimo MP-Bus plus PCD7.F1xxS as option 90 mA 15 mA EA 0/1

System properties of PCD2.F2xxx modules

The following points must be observed when using the PCD2.F2xxx interface modules:
` For each PCD1.M2120R1 Room Edition, up to 1 PCD2.F2xxx module (2 interfaces) can be used in slot I/O 0.
` To determine the maximum communication capacity for each PCD1.M2 system, consult the information and examples
provided in Manual 27/619 für PCD1.M2110R1.

Memory modules

The onboard memory can be extended by means of a PCD7.Rxxx module in slot M1. In addition, BACnet® IP or LON IP
can be activated.
For more information about memory management and construction, see Chapter 1.1 Saia PCD® System description.

Memory extension and communication

PCD7.R550M04 Flash memory module with 4 MByte file system (for user program backup, web pages, etc.) M1
PCD7.R560 Flash memory module for BACnet® firmware M1
PCD7.R562 Flash memory module for BACnet® firmware with 128 MByte file system M1
PCD7.R55xM04
PCD7.R580 Flash memory module for LON IP firmware M1
PCD7.R582 Flash memory module for LON IP firmware with 128 MByte file system M1 PCD7.R610
PCD7.R610 * Base module for Micro SD Flash Card M1
PCD7.R-MSD1024 * Micro SD Flash Card 1024 MB, PCD formatted PCD7.R610
*) In preparation, see section C2 Product status

saia-pcd.com Automation stations – Saia PCD1

 PCD1 61

Accessories and consumables for Saia PCD1.Room (PCD1.M2110R1)

Labeling
The self-adhesive labels can be printed directly with the
SBC LabelEditor from the PG5 Device Configurator

Automation
stations
1
EPLAN macros
For project planning and engineering ePLAN® electric P8 macros are available from the
EPLAN macros are available support page.
Macros and product data may also be obtained
from the ePLAN® data portal.

HMI Visualization
and operating
Battery for data backup
Type Description
4 507 4817 0 Lithium battery for PCD processor unit (RENATA button battery type CR 2032)

2
Plug-in screw terminal blocks
4 405 5089 0 Plug-in screw terminal block, 11-pole, labeling 0…10 Terminal X0
4 405 5087 0 Plug-in screw terminal block, 9-pole, labeling 11…19 Terminal X1
4 405 5088 0 Plug-in screw terminal block, 10-pole, labeling 20…29 Terminal X2

Cover
4 104 7759 0 Housing cover for PCD1.M2xxx without SBC-Logo

room controller
can be individually designed on site with a foil

Dedicated
3
Range of uses

Applications Room control units

Connection options via the following:

` Analog signals (onboard)
Options for programmable applications:
` Radiators
` Fan-coil applications
` S-Bus (onboard)
Consumption data
` Modbus (onboard)
` Cooling ceiling
` Internet access, web server (onboard)
acquisition
` VAV – variable air volume
` BACnet® with PCD7.R56x (slot M1)
` Air quality control
` BACnet® MS/TP with PCD2.F2150* (slot I/O 0)
` Signal contacts (occupancy control,
` LON IP with PCD7.R58x (slot M1)
4

presence detection, window monitoring)

` Lighting control ` LON FTT 10 with PCD2.F2400 * (slot I/O 0)
` Blind control ` KNX over IP (IP onboard)
` etc. ` KNX TP with an external coupler
` EnOcean with external receiver

Applications should be examined closely taking account of the number of I/Os. Depending on the application, coupling
components

relays (for example: PCD7.L252) or S-Bus RIOs (PCD7.L200/L210) may be required. The S-Bus and Modbus stations are limited
to a maximum of 10 units.
Cabinet

* In preparation, see chapter C2 “Product status”

5

Automation stations – Saia PCD1 saia-pcd.com

62 PCD1
1.4.3 Saia PCD1.M0160E0 E-Controller

The freely programmable E-Controller (PCD1.M0160E0) is a compact controller with a factory pre-load-
ed S-Monitoring application. For more about S-Monitoring and the loaded application, see below under
Chapter 4 „S-Monitoring“, section 4.8 „E-Controller“. Designed for compatibility with an electrical control
box, the E-Controller is suitable for installation in a power distribution unit or any restricted space. In
addition to integral I/Os, interfaces and web/IT functions, the PCD1.M0160E0 offers further ways of
connecting various protocols. This controller is therefore ideal as a micro-controller or communications
gateway (e.g. EnOcean, KNX, BACnet ...) or for acquiring, logging and processing consumption data.

Layout

Power supply 24 VDC

Watchdog relay
RS-485 interface

M1 Slot for memory

X3 modules and com-
munication
Slot for
communication interfaces
Slot A
Battery
S-Monitoring
application
Operational LEDs
RUN/STOP button
loaded
USB port

Ethernet connection For more details, see Chapter 4

(2 port switch) X2 X1 X0

Terminals for op- Terminals for integral

tional connection inputs and outputs
(slot A)

Mounting Dimensions Power supply & connection plan

142

Supply

1.5mm2 / max. 25 cm
Earthing bar

on a flat surface on top-hat rail 142 61

(35 mm according to
DIN EN 60 715 TH35) Further information is provided in the
Saia PCD3 power supply and connection
plan section and in Manual 26-875.

saia-pcd.com Automation stations – Saia PCD1

 PCD1 63

Overview Saia PCD® E-Controller (PCD1.M0160E0)

Technical data PCD1.M0160E0

Memory and file system

Program memory, DB/text (Flash) 1 MByte
Working memory, DB/text (RAM) 1 MByte

Automation
User flash file system onboard 128 MByte

stations
Integral communication
Ethernet connection (2 port switch) yes
10/100 Mbit/s, full duplex, autosensing, auto-crossing

1
USB connection yes
USB 1.1 device 12 Mbit/s
RS-485 (terminal X3) yes
up to 115 kbit/s

General data
Supply voltage 24 VDC, –20/+25% max. incl. 5% ripple (in accordance with EN/IEC 61131-2)

HMI Visualization
Battery for data backup (exchangeable) Lithium battery with a service life of 1 to 3 years

and operating
Operating temperature 0…55 °C
Dimensions (W×H×D) 142 × 142 × 60 mm
Type of Mounting Top-hat rail according to DIN EN60715 TH35 (1 × 35 mm) or on a flat surface
Protection type IP 20
Capacity 5V/+V(24V) internal max. 500 mA/200 mA

2
Power consumption typically 12 W
Automation Server Flash memory, Filesystem, FTP and Web-Server, E-Mail, SNMP

Automation Server
SNMP
integrated in
the base unit

On-Board inputs/outputs

room controller
Inputs
6 Digital inputs (4 + 2 interrupts) 15…30 VDC, 8 ms / 0,2 ms input filter Terminal X1

Dedicated
2 Analog inputs, selectable via DIP switch, –10…+10 VDC, 0…+/–20 mA,
Terminal X1
preconfigured for Ni1000 in the default setup Pt1000, Ni1000, Ni1000 L&S, 0…2.5 kΩ

Outputs
4 Digital outputs 24 VDC Terminal X0

3
1 PWM output 24 VDC / 0.2 A Terminal X0

selectable/configurable via PG5

4 Digital inputs or outputs,
24 VDC / data as digital inputs resp. outputs Terminal X0
preconfigured for digital inputs in the default setup
1 Watchdog relay or as make contact 48 VAC or VDC, 1 A
mount a free wheeling diode over the load when switching DC-tension
Terminal X3

Consumption data
Analogue output module Saia PCD7.W600 *) acquisition
This new analogue outputs (range 0 to +10 V) with 12 bits resolution has been especially developed for the new
PCD1 CPU (PCD1.M2xxx, PCD1.M0160E0, PCD1.M2110R1 ). It can be plugged in the slot A instead of a commu-
nication interface.
*) In preparation, see section C2 Product status
4

Installation instructions and recommendations

Mounting in electrical cabinet

The Saia PCD1.M0160E0 is sized 142 × 142 × 60 mm, excluding terminals and connectors.
For proper installation, a space of 55 mm should be left above the DIN rail and 75 mm below it.
components

Ethernet cable
For installation in the sub electrical cabinet unit, angled or flexible network cable (e.g. SlimWire PRO) is recommended.
Cabinet

If conventional network cable is installed, mounting of the sub electrical cabinet cover cannot be guaranteed.
5

Automation stations – Saia PCD1 saia-pcd.com

64 PCD1
Interface options Saia PCD® E-Controller (PCD1.M0160E0)
X3 M1

In addition to the onboard interfaces, modular expansion of interface functions is possible at slot A. Slot A
For this purpose, the Saia PCD1.M0160E0 supports numerous protocols. A detailed list of all protocols
find in chapter B2 „Communication & Interaction“.
X2 X1 X0

Current Current
consumption consumption
Communication at 5V bus at +V bus (24 V)
PCD7.F110S RS-485/RS-422 not electrically isolated 40 mA --- Slot A
PCD7.F121S RS-232 with RTC/CTS, DTR/DSR,
15 mA --- Slot A
DCD suitable for modem or EIB connection
PCD7.F150S RS-485 electrically isolated,
with activatable termination resistors 130 mA --- Slot A
PCD7.F180S Belimo MP-Bus, for connecting up to 8 drives on one line 15 mA 15 mA Slot A

Connection example: M-Bus with external interface

M-Bus
M-Bus
M-Bus

RS-485 RS-232

Memory modules
The onboard memory can be extended by means of a PCD7.Rxxx module in slot M1. In addition, BACnet® IP or LON IP
can be enabled.
For more information about memory management and construction, see Chapter 1.1 Saia PCD® System description.

Memory extension and communication

PCD7.R550M04 Flash memory module with 4 MByte file system (for user program backup, web pages, etc.) M1
PCD7.R560 Flash memory module for BACnet® firmware M1
PCD7.R562 Flash memory module for BACnet® firmware with 128 MByte file system M1
PCD7.R55xM04
PCD7.R580 Flash memory module for LON IP firmware M1
PCD7.R582 Flash memory module for LON IP firmware with 128 MByte file system M1 PCD7.R610
PCD7.R610 * Base module for Micro SD Flash Card M1
PCD7.R-MSD1024 * Micro SD Flash Card 1024 MB, PCD formatted PCD7.R610
*) In preparation, see section C2 Product status

For the parallel operation of S-Monitoring and BACnet® respectively LON, please note the instructions on the
support homepage www.sbc-support.com

Accessories and consumables

EPLAN macros ePLAN® electric P8 macros are available from the
support page.
For project planning and engineering
EPLAN macros are available Macros and product data may also be obtained
from the ePLAN® data portal.
Battery for data backup
Type Description
4 507 4817 0 Lithium battery for PCD processor unit (RENATA button battery type CR 2032)

Plug-in screw terminal blocks

4 405 5089 0 Plug-in screw terminal block, 11-pole, labeling 0…10 Terminal X0
4 405 5087 0 Plug-in screw terminal block, 9-pole, labeling 11…19 Terminal X1
4 405 5088 0 Plug-in screw terminal block, 10-pole, labeling 20…29 Terminal X2
4 405 4919 0 Plug-in screw terminal block, 10-pole, labeling 30…39 Terminal X3

saia-pcd.com Automation stations – Saia PCD1