Scribd
Upload
49 views13 pages

Engineering Survey Mapping Utilities On Cable Line at Kuala Lumpur South-New Seapark

This document summarizes the process of mapping utilities on an underground cable line in Kuala Lumpur South. The objectives are to produce a detailed plan showing all underground utilities on the site. This involves carrying out horizontal and vertical control surveys using GNSS, detecting underground utilities using pipe and cable locators and ground penetrating radar, and precisely locating the detected utilities using a total station. The collected data will then be processed in CAD software to produce the final utilities plan.

Uploaded by

Wan Wan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views13 pages

Engineering Survey Mapping Utilities On Cable Line at Kuala Lumpur South-New Seapark

This document summarizes the process of mapping utilities on an underground cable line in Kuala Lumpur South. The objectives are to produce a detailed plan showing all underground utilities on the site. This involves carrying out horizontal and vertical control surveys using GNSS, detecting underground utilities using pipe and cable locators and ground penetrating radar, and precisely locating the detected utilities using a total station. The collected data will then be processed in CAD software to produce the final utilities plan.

Uploaded by

Wan Wan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

ENGINEERING SURVEY

MAPPING UTILITIES ON CABLE


LINE AT KUALA LUMPUR SOUTH-
NEW SEAPARK
PREPARED BY:
MUHAMMAD RIDHUAN BIN ABDUL RAHMAN
GLS 396- LAND SURVEY BASED
2017248694
WHAT IS UTILITIES MAPPING?
Process of identifying and labeling public utility mains that were located underground.
Utility survey include lines for telecommunication, electricity distribution, fiber optics, traffic
lights, street lights.
AIM AND OBJECTIVES
AIM OBJECTIVES

To produce a detail Carry out utilities underground


plan that shows the detection
underground utilities
that exists on the lot. Mark the detection point on the ground
using spray paint

Pick up the marked position of utilities using total


station and processed data.
EQUIPMENTS

GPS PIPE CABLE LOCATOR GROUND PENETRATION RADAR


LOCATION OF PROJECT
FLOW OF WORK
Preparation and Recognize the
Request the survey
documentation in location and carry Fieldwork
by client
office out reconnaisance

Processing the Plotting and Produce the


data in CDS editing in AutoCAD Utilities Plan
METHODOLOGY
HORIZONTAL CONTROL
▪CAN USE GNSS RTK METHOD
▪SETUP THE GNSS RECEIVER AT KNOWN POINT, OR CAN USE VRS OR CORS STATION.
▪USE ANOTHER GNSS AS ROVER, AND PLACE IT AT THE BOUNDARY MARK OF THE LOT.
▪OBSERVE EVERY BOUNDARY MARK OF THE LOT.
▪MAKE SURE THE STATUS AT THE CONTROLLER IS FIX.
VERTICAL CONTROL
▪CAN USE GNSS LEVELLING METHOD.
▪SETUP THE GNSS RECEIVER AT JUPEM BENCHMARK.
▪USE ANOTHER GNSS AS ROVER, AND PLACE IT AT THE BOUNDARY MARK OF THE LOT.
▪OBSERVE EVERY BOUNDARY MARK OF THE LOT.
DETAIL SURVEY
▪USING GNSS RTK METHOD.
▪THE ULITIES THAT HAVE BEEN MARKED ON THE SITE WILL BE OBSERVE FOR COORDINATE.
▪TAKE THE FEATURES AROUND THE SITE.
UTILITIES UNDERGROUND SURVEY
USING PIPE CABLE LOCATOR AND GROUND PENETRATION RADAR.
WALK IN GRID PATTERN
SWEEPING IN TWO PERPENDICULAR DIRECTIONS
STOP WHEN YOU GET RESPONSE.
MOVE THE TRANSMITTER TO THE POINT AND TRACE THE CONDUCTOR WHICH HAS FOUND.
RESTURN TO THE STARTING POINT AND RESUME SWEEPING, LOOKING FOR MORE CONDUCTORS
DATA PROCESSING

DONWLOAD EXPORT THE


PROCESS THE PRODUCE THE
THE DATA FOR DATA FROM CDS
DATA UTILITIES PLAN
PCL AND GPR TO AUTOCAD

You might also like