Scribd
Upload
126 views2 pages

UD06302B - Spec of DS-K1T802 Series Access Control Terminal - 1.0 - 20171010

The document describes the DS-K1T802 series access control terminal. It has two available models, the DS-K1T802E that supports EM cards only and the DS-K1T802M that supports M1 cards only. The main features of the terminal include supporting up to 3000 card numbers, 10000 event records, offline operation, network communication, multi-authentication modes, alarm functions, and time synchronization.

Uploaded by

Ave Jianne Garcia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views2 pages

UD06302B - Spec of DS-K1T802 Series Access Control Terminal - 1.0 - 20171010

The document describes the DS-K1T802 series access control terminal. It has two available models, the DS-K1T802E that supports EM cards only and the DS-K1T802M that supports M1 cards only. The main features of the terminal include supporting up to 3000 card numbers, 10000 event records, offline operation, network communication, multi-authentication modes, alarm functions, and time synchronization.

Uploaded by

Ave Jianne Garcia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DS-K1T802 Series

Access Control Terminal

AVAILABLE MODELS

DS-K1T802E (EM Card Only)


DS-K1T802M (M1 Card Only)

MAIN FEATURES

 32-bit processor
 Stand-alone operation management settings
 Supports offline working, and online upgrade
 Max. 3000 card number settings, and Max. 10000 event records
 Supports Mifare card recognition, and Mifare card number reading (DS-K1T802M)
 Supports ID card recognition, and ID card number reading (DS-K1T802E)
 128×64 Dot Matrix STN screen for displaying time, date, and week
 Supports TCP/IP network communication
 Multi-authentication mode: card, card and password
 Supports exit button
 Supports duress alarm function, and self-defined duress password(card)
 Supports first card, remote open door, super card and super password. Super password
would not be restricted by the schedule template. Super card must observe the permission
schedule (excepts the NC status)
 Supports offline event alarm for insufficient storage, offline alarm, door unsecured alarm,
force opening door alarm, door opening time out alarm etc.
 Supports self-defined number for eliminating alarm
 Supports multi types of card: normal/disabled/blacklist/patrol/super/duress
 Supports time synchronization via NTP, manual or automatic method
 Watchdog design
 Data can be permanently saved after power-off
 Client supports attendance function

1
Spec of DS-K1T802 Series Access Control Terminal www.hikvision.com

SPECIFICATIONS

Model
DS-K1T802E DS-K1T802M
Parameters
Processor 32bit
Storage Storage for 3000 Legal Card Information and 10,000 Event Records
Communication type TCP/IP
Card type EM Card Mifare Card
Input interface Exit Button × 1, Door Sensor × 1
Output interface Doorbell × 1, E-lock Output × 1
Key board 13 Keys (0-9, , *, #, Doorbell)
Display screen STN Screen (Resolution 128*64)
LED Indicator Communication/Status
Voice prompt Beeper
Working voltage 12V DC
Working current 0.17 A(without Load)
Working Temperature -20°C to 65°C (-4° F to 149° F)
Working Humidity 10% to 90% (No Condensing)
Dimension 126.5(L)mm×94.5(W)mm×24(H)mm (4.98" × 3.72" × 0.94")

You might also like